Issue 47

J. P. Manaia et alii, Frattura ed Integrità Strutturale, 47 (2019) 82-103; DOI: 10.3221/IGF-ESIS.47.08 103 Reinforced Materials, Exp. Mech., pp. 141–146. [16] Mohr, D., Doyoyo, M. (2002). Analysis of the Arcan Apparatus in the Clamped Configuration, J. Compos. Mater., 36(22), pp. 2583–2594. DOI: 10.1106/ 002199802027874 . [17] FEI Company. (2008). Quanta 3D FEG User Operation Manual, , pp. 1–192. [18] European Committee for Standardization (CEN). (n.d.). EN ISO 527-1:1993 Plastics – Determination of Tensile Properties. [19] Pawlak, A., Galeski, A., Rozanski, A. (2014). Cavitation During Deformation of Semicrystalline Polymers, Prog. Polym. Sci., 39(5), pp. 921–958. DOI: 10.1016/j.progpolymsci.2013.10.007. [20] Fouad, H. (2010). Experimental and Numerical Studies of the Notch Strengthening Behaviour of Semi-Crystalline Ultra-High Molecular Weight Polyethylene, Mater. Des., 31(3), pp. 1117–1129. DOI: 10.1016/j.matdes.2009.09.042. [21] Bartczak, Z., Galeski, A. (2010). Plasticity of Semicrystalline Polymers, Macromol. Symp., 294(1), pp. 67–90. DOI: 10.1002/masy.201050807. [22] Humbert, S., Lame, O., Chenal, J.M., Rochas, C., Vigier, G. (2010). New Insight on Initiation of Cavitation in Semicrystalline Polymers: In-situ SAXS Measurements, Macromolecules, 43(17), pp. 7212–7221. DOI: 10.1021/ma101042d. [23] Viana, J.C. (2005). Structural Interpretation of the Strain-Rate , Temperature and Morphology Dependence of the Yield Stress of Injection Molded Semicrystalline Polymers, Polymer (Guildf), 46, pp. 11773–11785. DOI: 10.1016/j.polymer.2005.10.024. [24] Zhou, H., Wilkes, G.L. (1998). Orientation-Dependent Mechanical Properties and Deformation Morphologies for Uniaxially Melt-Extruded High-Density Polyethylene Films Having an Initial Stacked Lamellar Texture, J. Mater. Sci., 33, pp. 287–303. DOI: 10.1023/a:1004351209140. [25] Wattrisse, B., Muracciole, J.M., Chrysochoos, A. (2002). Thermomechanical Effects of Accompanying the Localized Necking of Semi-Crystalline Polymers, Int. J. Therm. Sci., 41(5), pp. 422–427. DOI: 10.1016/S1290-0729(02)01334-0. [26] Hartmann, B., Lee, G.F., Wong, W. (1987). Tensile Yield in Polypropylene, Polym. Eng. Sci., 27(11), pp. 823–828. DOI: 10.1002/pen.760271109. [27] Arruda, E.M., Boyce, M.C., Jayachandran, R. (1995). Effects of Strain Rate, Temperature and Thermomechanical Coupling on the Finite Strain Deformation of Glassy Polymers, Mech. Mater., 19(2–3), pp. 193–212. DOI: 10.1016/0167-6636(94)00034-E. [28] Chanda, M., Roy, S.K. (2008). Plastics Fundamentals, Properties and Testing, CRC press. [29] Peacock, A. (2000). Handbook of Polyethylene, Structures, Properties, and Applications, Marcel Dekker. [30] Dasari, A., Misra, R.D.K. (2003). On the strain rate sensitivity of high density polyethylene and polypropylenes, Mater. Sci. Eng. A, 358(1–2), pp. 356–371. DOI: 10.1016/S0921-5093(03)00330-7. [31] Dasari, A., Rohrmann, J., Misra, R.D.K. (2003). Microstructural Evolution During Tensile Deformation of Polypropylenes, Mater. Sci. Eng. A, 351(1–2), pp. 200–213. DOI: 10.1016/S0921-5093(02)00854-7. [32] Pawlak, A. (2007). Cavitation During Tensile Deformation of High-Density Polyethylene, Polymer (Guildf)., 48(5), pp. 1397–409. DOI: 10.1016/j.polymer.2006.12.054. [33] Brough, I., Haward, R.N., Healey, G., Wood, A. (2004). Scanning Electron Micrographs of High Density Polyethylene Fracture Surfaces, Polymer (Guildf), 45(10), pp. 3115–3123. DOI: 10.1016/j.polymer.2004.02.036.