Issue 43

L.C.H. Ricardo, Frattura ed Integrità Strutturale, 43 (2018) 57-78; DOI: 10.3221/IGF-ESIS.43.04 77 [48] Newman, J. C. Jr., A finite element analysis of fatigue crack closure, ASTM 490 (1976) 281-301. DOI: 10.1520/STP490-EB [49] Ohji, K., Ogura, K. Ohkubo, Y., Cyclic analysis of a propagation crack and its correlation with fatigue crack growth; Eng. Fracture Mechanics, 7 (1975) 457-464. DOI:10.1016/0013-7944(75)90046-6 [50] Blom, A. F., Holm, D. K., An experimental and numerical study of crack closure, Eng. Fracture Mech., 22 (1985) 907-1011. DOI:10.1016/0013-7944(85)90039-6. [51] Fleck, N. A., Finite element analysis of plasticity induced crack closure under plane strain conditions, Eng. Fracture Mech., 25 (1986) 441-449. DOI:10.1016/0013-7944(86)90258-4. [52] Fleck, N. A., Newman, J. C. Jr, Analysis of crack closure under plane strain conditions, ASTM STP 982 (1988) 319- 341. DOI: 10.1520/STP982-EB. [53] Sehitoglu, H. Gall, K., Garcia, A. M., Recent advances in fatigue crack growth modeling, Int. Journal of Fracture, 80 (1996) 165-192. DOI: 10.1007/BF00012668. [54] McGlung, R. C., Sehitoglu, H., Finite element analysis of fatigue crack closure – numerical results, Eng. Fracture Mechanics, 33 (1989) 253–272. DOI:10.1016/0013-7944(89)90028-3. [55] McGlung, R. C., Finite element modeling of fatigue crack growth – Theoretical Concepts and Numerical Analysis of Fatigue, In: Blom A, Beevers, C. Editors, West Midlands, EMAS, Ltda, (1992) 153-172. [56] McGlung, R. C., Finite element analysis of specimen geometry effects on fatigue crack closure, Fatigue Fract. Eng. Mater. Structures, 17 (1994) 861-872. DOI: 10.1111/j.1460-2695.1994.tb00816.x. [57] Newman, J. C. Jr., A Finite element analysis of fatigue crack closure, ASTM 490 (1976) 281-301. DOI: 10.1520/STP490-EB. [58] Hardrath, H.F, Newman, J.C. Jr, Elber, W., Poe, C.C. Jr., Recent developments in analysis of crack propagation and fracture of practical materials”, In: Perrone, N.; Liebowitz, H. Mulville, D., Pilkey W., editors, Fracture Mechanics, University of Virginia Press, (1978) 347-364. [59] Wu J., Ellyin F., A study of fatigue crack closure by elastic-plastic finite element analysis for constant-amplitude loading. Int. J. Fract., 82 (1996) 43–65. DOI: 10.1007/bf00017863. [60] Ellyin F., Wu J., A numerical investigation on the effect of an overload on fatigue crack opening and closure behavior. Fatig. Fract. Eng. Mater. Struct., 22 (1999) 835–847. DOI: 10.1046/j.1460-2695.1999.00223.x. [61] Seeger, T., Ein Breitag zur Berechnung von Statisch und Zyklisch Belasteten Reisscheiben nach dem Dugdale- Barenblatt Model, Institut fur Statik und Stahlbau, Report nº 21, Darmstadt, Germany, (1973). [62] Budianski, B., Hutchinson, J.W, Analysis of closure in fatigue crack growth, J. Appl. Mech., 45 (1978) 267-276. [63] Fuhring, H., Seeger, T., Dugdale Crack closure analysis of fatigue cracks under constant amplitude loading, Eng. Fracture Mech., 11 (1979) 99-122. DOI: 10.1016/0013-7944(79)90033-x. [64] Newman, J.C. Jr., A crack closure model for predicting fatigue crack growth under aircraft spectrum loading”, ASTM STP 748 (1981) 53-84. USA, DOI: 10.1520/E0748-16 [65] Wang, G.S., Blom, A.F., A modified Dugdale-Barenblatt model for fatigue crack growth predictions under general load predictions, The Aeronautic Research Institute of Sweden, Report FFA TN 1987-79, (1987). [66] Matos, PFP, Nowell D., On the accurate assessment of crack opening and closing stresses in plasticity-induced crack closure problems, Eng. Fracture Mech., 74 (2007) 1579–1601. DOI: 10.1016/j.engfracmech. 2007.10017. [67] Fleck N. A., Finite-element analysis of plasticity induced crack closure under plane strain conditions. Eng. Fracture Mech., 25 (1986) 441-449. DOI: 10.1016/0013-7944(86)90258-4. [68] Singh, K.D., Parry, M.R., Sinclair, I., Variable amplitude fatigue crack growth behavior – a short overview, Journal of Mechanical Science and Technology, 25 3 (2011) 663-673. DOI: 10.1007/s12206-011-132-6. [69] Lei, Y., Finite element crack closure analysis of a compact tension specimen, International Journal of Fatigue, 30 (2008) 21–31. DOI:10.1016/j.ijfatigue.2007.02.012 [70] ABAQUS, V6.3, Hibbitt, Karlsson, Sorensen, Inc., Providence, RI, (2002). [71] MSC/Patran r1, USA, (2008). [72] Antunes, F.V., Rodrigues, D.M, Numerical simulation of plasticity induced crack closure: identification and discussion of parameters, Eng. Fracture Mech., 75 (2008) 3101-3120. DOI: 10.1016/j.engfracmech.2007.12.009. [73] Jiang, Y., Feng, M., Ding, F., A re-examination of plasticity-induced crack closure in fatigue crack propagation, Int. J. Plasticity, 21 (2005) 1720–1740. DOI: org/10.1016/j.ijplas.2004.11.005 [74] Roychowdhury, S., Dodds, Jr. R.H., A numerical investigation of 3D small-scale yielding fatigue crack growth, Eng. Fracture Mech.,70 (2003) 2363–2383. DOI: org/10.1016/S0013-7944(03)00003-1. [75] Pommier, S., Plane strain crack closure cyclic hardening, Eng. Fracture Mech., 69 (2002) 25-44. DOI: org/10.1016/S0013-7944(01)00061-3.