Issue 43

F.Z. Seriari et alii, Frattura ed Integrità Strutturale, 43 (2018) 43-56; DOI: 10.3221/IGF-ESIS.43.03 55 [26] Verhoeven, S., Preparation of the spectrum testing of bonded Glare repairs for the C-5A Galaxy, a study of the interaction effects of peak loads on bonded repairs and a proposal for the modification of C-5A aft crown spectrum data. TZ Report, Delft University of Technology, The Netherlands (1997). [27] Wang, C.H., Rose, L.R.F., Baker, A.A., Modelling of the fatigue growth behaviour of patched cracks. International Journal of Fracture 88 (1998) L65–L70. [28] Wu, X.R., Guo, Y.J., Fatigue behaviour and life prediction of fibre reinforced metal laminates under constant and variable amplitude loading, Fatigue Fract. Engng Mat. Struct. 25 (2002) 417–432, DOI: 10.1046/j.1460-2695.2002.00517.x/abstract. [29] Vlot, A., Massar, J.M.A., Guijt, C.B., Verhoeven, S., Bonded aircraft repairs under variable amplitude fatigue loading and at low temperatures, Fatigue Fract. Engng Mat. Struct. 23 (2000) 9-18. DOI: 10.1046/j.1460-2695.2000.00250.x/abstract. [30] Boyd, K.L. Krishnan, S., Litvinov, A., Eisner, J.H., Harter, J.A., Ratwani, M.M., Glinka, G., Development of structural integrity analysis technologies for aging aircraft structures: bonded composite patch repair and weight function methods. Analytical Services & Materials, Inc., Hampton Virginia for WL/FIBEC, Wright-Patterson Air Force Base, Ohio (1997). [31] Baker, A.A., Jones, R., Bonded repair of aircraft structures. Dordrecht, Netherlands, Martinus Nijhoff Publisher (1988). [32] Royal Australian Airforce Engineering Standard C5033, Composite materials and adhesive bonded repairs. RAAF Headquarters Logistics Command, Melbourne, Vic., Australia (1995). [33] Ratwani, M.M., Analysis of cracked adhesively bonded laminated structures. AIAA Journal 17(9) (1979) 988-994. DOI: 10.2514/3.61263. [34] Ricci, F., Franco, F. Montefusco, N., Bonded composite patch repairs on cracked aluminum plates: theory, modeling and experiments. In: Advances in Composites Materials - Ecodesign and Analysis. Edited by Brahim Attaf, InTech Publisher, Croatia (2011). [35] Harter, J.A., AFGROW users guide and technical manual - AFGROW for Windows 2K/XP. Version 4.0011.14, Air Force Research Laboratory (2006). [36] Forman, R.G., Mettu, S.R., Behavior of surface and corner cracks subjected to tensile and bending loads in Ti-6Al-4V alloy. Fracture Mechanics 22nd Symposium, Vol. 1, ASTM STP 1131, H.A. Ernst, A. Saxena and D.L. McDowell, eds., American Society for Testing and Materials, Philadelphia (1992). [37] Zhang, W., Wang, Q., Li, X., He, J., A simple fatigue life prediction algorithm using the modified Nasgro equation, Mathematical Problems in Engineering, (2016) ID 4298507. [38] Beretta, S., Carboni, M., Simulation of fatigue crack propagation in Railway axles. Journal of ASTM International 2(5) - ID JAI12040 (2005): 368-381. DOI: 10.1520/JAI12040. [39] Skorupa, M., Machniewicz, T., Schijve, J., Skorupa, A., Application of the strip-yield model from the Nasgro software to predict fatigue crack growth in aluminium alloys under constant and variable amplitude loading, Engineering Fracture Mechanics 74 (2007) 291–313. DOI: 10.1016/j.engfracmech.2006.06.014. [40] Maierhofer, J., Pippan, R., Gänser, H.P., Modified nasgro equation for physically short cracks, International Journal of Fatigue 59 (2014) 200–207. DOI: 10.1016/j.ijfatigue.2013.08.019. [41] Gallagher, J.P., A Generalized Development of Yield-Zone Models,” AFFDL-TM-74-28, Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base, Ohio (1974). [42] Kumar, R., Prediction of delay cycles due to instant of single overload cycles, Engineering Fracture Mechanics 42(3) (1992) 563-571. DOI: 10.1016/0013-7944(92)90174-D. [43] Benachour, M, Seriari, F.Z, Benachour, N., Benguediab, M., Beneficial patch repair effect on fatigue crack growth of al-alloy 7050, Applied Mechanics and Materials 225 (2012) 158-164. DOI: 10.4028/ www.scientific.net/AMM.225.158. [44] Černý, I, Mikulová, D., Evaluation of overloading and crack closure effects on fatigue crack growth in an aircraft 7075-T7351 Al-alloy. Key Engineering Materials 577-578 (2014) 325-28. DOI: 10.4028/ www.scientific.net/KEM.577-578.325. [45] Topper, T., DuQuesnay, D., The effects of overloads in service load histories on crack closure and fatigue damage, SAE Technical Paper 2001-01-4079 (2001), DOI:10.4271/2001-01-4079. [46] Salvati, E., O’Connor, S., Sui, T., Nowell, D., Korsunsky, A.M., A study of overload effect on fatigue crack propagation using EBSD, FIB-DIC and FEM methods. Engineering Fracture Mechanics 167 (2016) 210-223. DOI: 10.1016/j.engfracmech.2016.04.034.