Issue 42

M. Davydova et alii, Frattura ed Integrità Strutturale, 42 (2017) 170-180; DOI: 10.3221/IGF-ESIS.42.18 175 -0.1-0.25 mm. By analyzing the grain size– grain number distribution shown in Fig. 6 it can be seen that in the range 0.5÷1 mm number of grains increases more than five times. Most of the grains (60%) are Feldspar (Potassium feldspar and Plagioclase) and 40% are Amphiboles. For fragments with the size of more than 2 mm, the fracture mechanism is due to cracking (Fig. 4), whereas the formation of fragments of about 1mm can involve an additional mechanism of fracture, which is provided by chipping of feldspar and amphiboles grains. A considerable increase in the fragments number with the size less than 0.5 mm (Fig. 2(c)) may be caused by chipping of Quartz. Figure 6: Statistical data on grain size. I MAGING PARTICLE ANALYSIS he imaging particle analysis was performed based on the photos of fragments collected in the sieves. The fragment shape is characterized by circularity, C , given by:    2 4 / C S P (3) where S is the area and P is the perimeter of the fragment image in the photographs given in Fig.7. The circularity value equal to 1.0 indicates a perfect circle. A decrease in the sieve size leads to a growth of the circularity to 0.8 and narrowing of the scatter, Fig.8. This can be indicative of the fact that fragmentation on the small scale is defined by the structure of material and mainly by feldspar and amphiboles, the grain size of which is about 1mm. An increase of the circularity for the sieve with the cell size of 0.63mm, compared to the cell size of 1mm, is different for different samples, Fig. 9. It depends on the material structure of the samples. C OMPARISON WITH OTHER MATERIAL e have analyzed fragmentation of six materials under five different loading conditions: i) granite fragmentation under quasi-static loading (present paper); ii) fragmentation of impact-loaded quartz bars [18-20], iii) 2 ZrO [20- 23] and SiC [21] ceramics fragmentation in a Hopkinson pressure bar test, iiii) syminal (synthetic mineral alloy) fragmentation under high-speed impact [20]; iiiii) fragmentation of tubular alumina ( 2 3 Al O ) samples under shock-wave loading [24,25]. The main parameter, which governs fragmentation statistics, is the specific strain energy ( J/kg ) E . Due to the usage of different loading setups, it is impossible to evaluate specific energy using the same method. But the 0 10 20 30 40 50 60 70 1 2 3 4 5 6 7 8 9 Grain number Grain size, mm Plagioclase Potassium feldspar Amphiboles Quartz grain size,mm 1 0.01-0.05 2 0.05-0.1 3 0.1-0.25 4 0.25-0.5 5 0.5-1.0 6 1.0-1.5 7 1.5-2.0 8 2.0-2.5 9 more than 2.5 T W