Issue 42

M. Davydova et alii, Frattura ed Integrità Strutturale, 42 (2017) 170-180; DOI: 10.3221/IGF-ESIS.42.18 173 where the fractal dimension D varies in the range from 0.563 to 0.682, and C varies in the range from 25 to 42. The expression (2) is called the fractal number relation [1]. To evaluate the scatter of D , we tested at a grip displacement rate  0.05 V mm/min four samples and at a value  0.02 V mm/min three samples (Fig. 3). The coefficient of variation is 4% and 9% for grip displacement rate  0.05 V mm/min and for  0.02 V mm/min, respectively. It is evident that for a reliable conclusion would require extensive statistical sampling, but under the given loading condition we assume that the variation in D is caused by the material inhomogeneity. Moreover, in Fig. 3 it can be observed that the power law exponent D does not practically change when the grip displacement rate increases by a factor of ten. The fragment number-sieve size distribution has the feature in the range of about 1mm, Fig.2(c). Insert in Fig.2(c) illustrates this distribution in a log- log plot. If the fragment number-sieve size distribution is described by power law (in this case, the graph in insert of Fig.2(c) would be a straight line) the fragment number in the sieve with a cell size 1.1 mm will be lower than that obtained in experiments. This feature of fragment number-sieve size distribution is more or less pronounced, depending on the sample. Figure 3: Power law exponent D vs grip displacement rate. S TRUCTURE STUDY n order to understand the nature of this feature, the granite structure of fragmented sample was examined by using: X- ray Computed Tomography (CT), petrography–analysis of rocks in thin section, granulometric analysis and imaging particle analysis. X-ray Computed Tomography (CT) CT was performed for one of a big fragment with size, of about 28mm ×9mm×9mm and mass 2.26g. This fragment has a big cluster of cracks, which illustrates the process of granite fragmentation (Figs.4). Blue color in the volume rendered CT image of this fragment indicates the crack cluster. Gray scale 2D image (Fig. 4c) allows us to conclude that Mansurov granite fracture can be both of transgranular as well intergranular character [7]. Using CT it is impossible to evaluate, which grains (plagioclase, potash feldspar or quartz) are responsible of fracture, because the density for these three minerals is practically the same (plagioclase density is 2620-2760 kg/m 3 ; potash feldspar density is 2540-2750 kg/m 3 ; quartz density is about 2650 kg/m 3 ). Petrography–analysis of rocks in thin section Petrography-analysis was done using Polarizing microscope OLIMPUS BX51. It showed (Fig.5) that Mansurov granite has hypidiomorphic (with different degrees of idiomorphism of the grains of plagioclase, potash feldspar, quartz and hornblende) and porphyritic structure which the main part consists of plagioclase phenocryst. Texture of the rock is homogeneous and disorderly. Main rock-forming minerals are plagioclase (25-30%), potassium feldspar (25-27%), quartz (25-30%) and amphiboles (10%). Amphiboles are represented by hornblende and clusters of aggregates of actinolite needles. 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.00 0.05 0.10 0.15 0.20 0.25 Power law exponent, D Grip displacement rate, V, mm\min sample#8 sample#7 sample#13 sample#5 sample#15, sample#12 sample#14 sample#10 sample#18 I