Issue 41

Z. Li et alii, Frattura ed Integrità Strutturale, 41 (2017) 378-387; DOI: 10.3221/IGF-ESIS.41.49 387 [3] Park, M.J., Yang, H.N., Jang, D.Y., Kim, J.S., Jim, T.E., Residual stress measurement on welded specimen by neutron diffraction, Mater Process Tech., 155-156 (2004) 1171-1177. DOI: 10.1016/j.jmatprotec.2004.04.393. [4] Shang, F., Zhao M.H., Stainless steel overall stability of i-section section axial compression member finite element study, Journal of engineering mechanics, 33(3) (2016) 112-119. Yuan, H.X., Wang, Y.Q., Shi, Y.J., The stainless steel welded i-section experimental study the residual stress distribution, Journal of building structures, 35(6) (2014) 84-92. [5] Qu, L.H., Wei, F.F., Huang, J.H., At the beginning of bending and residual stress of welding steel i-beam modal effect of numerical simulation, Journal of water conservancy and architectural engineering, 11(1) (2013) 105-109. [6] Ding D.W., Xue J., Blind hole method in the application of steel box girder bridge welding residual stress test, Journal of urban road and bridge and flood control, 2 (2017) 158-161. [7] Mo, M.C., The internal residual stress in weldments was tested based on contour method, Journal of low-carbon technologies, 2 (2017) 67-68. [8] American Society for Testing and Materials, Standard Test Method for Determining Residual Stresses by the Hole- drilling Strain-gage Method, America: Annual Book of ASTM Standards, E837-E808, 2008. [9] Trebuna, F., Simcak, F., Bocko, J., Sarga, P., Trebuna, P., Pastor M., Mihok, Quantification of Residual Stresses in the Weld by the Hole-drilling Method, Metalurgija, 47(2) (2008) 133-137. [10] Kamal, B.S., Farahaninia, Experimental measurement of residual stresses in cold-drawn aluminum tubes, USA: The Graduate Faculty of Texas Tech University 13 (1990). [11] Wang, N., Research on measuring welding residual stress of plate of moderate thickness using blind hole method, Dalian University of Technology, Dalian, (2007). [12] Chen, X.R., Jiang Y.Y., Zhao Z.Y., Comparison for Different Circumferential Weld-induced Imperfections on Steel Silos. Advanced Materials Research, (2011) 250-253. DOI: 10.4271/910191. [13] Tsai, C.L., Dai, W.L., Dickinson, D.W., Analysis and Development of a Real-time Control Methodology in Resistance Spot Welding, Welding Research Supplement, 70(12) (1991) 339-351. DOI: 10.4271/910191. [14] Inoue, T., Metallo-Thermo-Mechanics Application to Phase Transformation Incorporated Processes, Pros. Theoretical Prediction in Joining and Welding, 12(3) (1996) 89-112. [15] Lars-Erik, L., Lennart K., Deformations and Stresses in Welding of Shell Structures, International Journal for Numerical Methods in Engineering, 25(2) (1998) 635-638. DOI: 10.1002/nme.1620250223. [16] Teng, T.L., Analysis of Residual Stresses and Distortions in T-joint Fillet Welds, International Journal of Pressure Vessels and Piping, 78(8) (2001) 523-538. DOI: 10.1016/S0308-0161(01)00074-6. [17] Sicot, O., Gong, X.L., Cherouat, A., Lu, J., Influence of Experimental Parameters on Determination of Residual Stress Using the Incremental Hole-drilling Method, Composites Science and Technology, 64(2) (2004) 171-180. DOI: 10.1016/S0266-3538(03)00278-1. [18] American Society for Testing and Materials. ASTM E837 — 08: Standard Test Method for Determining Residual Stresses by the Hole-drilling Strain-gage Method, America: Annual Book of ASTM Standards, (2008). [19] Cui, X.W., Ni, W., Ren, C., Early Hydration Kinetics of Cementitious Materials Containing Different Steel Slag Powder Contents, International Journal of Heat and Technology, 34(4) (2016) 590-596. DOI: 10.18280/ijht.340406. [20] Wang, X.Z., Wang, C.Q., Analysis of Temperature Stress in Control of Bridge Construction, International Journal of Heat and Technology, 34(4) (2016) 715-721. DOI: 10.18280/ijht.340423.