Issue 36

L. C. H. Ricardo et alii, Frattura ed Integrità Strutturale, 36 (2016) 201-215; DOI: 10.3221/IGF-ESIS.36.20 214 [34] Crooker, T. W., Effect of cycling on fatigue grade growth in high strength alloys, NRL Report 7220, (1971). [35] Hudson, C.M., Hardrath, H. F., Effects of changing stress amplitude on the rate of fatigue-crack propagation in two aluminum alloys, NASA TN D-960, (1961). [36] Mcmillan, J. C., Pelloux, R. M., ASTM STP, 415 (1966) 505. DOI: 10.1520/STP415-EB. [37] Dill, H. D., Saff, C. R., Spectrum crack growth prediction method based on crack surface displacement and contact analyses, fatigue crack growth under spectrum loads, ASTM STP, Philadelphia, PA, 595 (1976) 306–19. DOI: 10.1520/STP595-EB. [38] Newman, J. C. Jr., A crack closure model for predicting fatigue crack growth under aircraft spectrum loading. In: Chang JB, Hudson CM, editors. Methods and models for predicting fatigue crack growth under random loading, Philadelphia, PA ASTM STP, 748 (1981) 43–84. DOI: 10.1520/STP748-EB. [39] Ricardo, L. C. H.; Pimenta, P. M. & Spinelli, D., Crack Closure Simulation by Finite Element. In, Blom, A.F. Fatigue 2002, West Midlands, Emas, 4/5 (2002) 2293 – 2300. [40] Swedlow, J. L., The thickness effect and plastic flow in cracked plates, PhD Thesis, California Institute of Technology, Pasadena, USA, (1965). [41] Schijve, J., Observations on the prediction of fatigue crack growth propagation under variable amplitude loading, ASTM STP, 595 (1979) 3-23. DOI: 10.1520/STP595-EB. [42] Newman J. C. Jr., Finite element analysis of fatigue crack propagation, including the effect C-(T) of crack closure, PhD Thesis, Virginia Polytechnic Institute, (1974). [43] Newman, J. C. Jr., Armen, H. Jr. Elastic-plastic analysis of fatigue crack under cyclic loading, AIAA Journal, 13 (1975) 1017-1023. DOI: 10.2514/3.60499. [44] Newman, J. C. Jr., A finite element analysis of fatigue crack closure, ASTM, 490 (1976) 281-301. DOI: 10.1520/STP490-EB. [45] Ohji, K., Ogura, K. Ohkubo, Y., Cyclic analysis of a propagation crack and its correlation with fatigue crack growth; Eng. Fracture Mechanics, 7 (1975) 457-464. DOI: 10.1016/0013-7944(75)90046-6. [46] Blom, A. F., Holm, D. K., An experimental and numerical study of crack closure; Eng. Fracture Mechanics, (1985) 907-1011. DOI: 10.1016/0013-7944(85)90039-6. [47] Fleck, N. A., Finite element analysis of plasticity induced crack closure under plane strain conditions, Eng. Fracture Mechanics, 25 (1986) 441-449. DOI:10.1016/0013-7944(86)90258-4. [48] Fleck, N. A., Newman, J. C. Jr, Analysis of crack closure under plane strain conditions , ASTM STP, 982 (1988) 319- 341. DOI: 10.1520/STP982-EB. [49] Sehitoglu, H. Gall, K., Garcia, A. M., Recent advances in fatigue crack growth modeling, Int. Journal of Fracture, 80(2) (1996) 165-192. DOI: 10.1007/BF00012668. [50] McGlung, R. C., Sehitoglu, H., Finite element analysis of fatigue crack closure – numerical results, Eng. Fracture Mechanics, 33 (1989) 253–272. DOI: 10.1016/0013-7944(89)90028-3. [51] McGlung, R. C., Finite element modeling of fatigue crack growth – theoretical concepts and numerical analysis of fatigue, In: Blom A, Beevers, C. Editors, West Midlands, Emas, (1992) 153-172. [52] McGlung, R. C., Finite element analysis of specimen geometry effects on fatigue crack closure, Fatigue Fract. Eng. Mater. Structures, 17 (1994) 861-872. DOI: 10.1111/j.1460-2695.1994.tb00816.x. [53] Solanki, K., Daniewicz, S. R., Newman, Jr J. C., Finite element modelling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects. Eng. Fracture Mechanics, 70 (2003) 1475–89. DOI:10.1016/s0013-7944(02)00168-6. [54] MSC/Patran r1, USA, (2008). [55] ABAQUS, V6.3, Hibbitt, Karlsson, Sorensen, Inc., Providence, RI, (2002). [56] Antunes, F.V., Rodrigues, D.M, Numerical simulation of plasticity induced crack closure: identification and discussion of parameters, Eng. Fracture Mechanics, 75 (2008) 3101-3120. DOI:10.1016/j.engfracmech.2007.12.009. [57] Pommier, S., Plane strain crack closure cyclic hardening, Eng. Fracture Mechanics, 69(3) (2002) 25–44. DOI:10.1016/s0013-7944(01)00061-3. [58] Ogura, K., Ohji, K., FEM analysis of crack closure and delay effect in fatigue crack gowth under variable amplitude loading. Eng. Fracture Mechanics, 9 (1977) 471–80. DOI: 10.1016/0013-7944(77)90039-X. [59] Ogura, K., Ohji, K., Honda, K., Influence of mechanical factors on the fatigue crack closure. advances in research on the strength and fracture of materials, In: Proceedings of the fourth International Conference on Fracture Mechanics, Waterloo, Canada, 2D (1977) 1035–1047. [60] Solanki, K., Daniewicz, S.R., Newman, Jr. J.C., Finite element modelling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects, Eng. Fracture Mechanic, 70 (2003) 1475–89.