Issue 35

M.V. Bannikov et alii, Frattura ed Integrità Strutturale, 35 (2016) 50-56; DOI: 10.3221/IGF-ESIS.35.06 53 Paris law (1). Area between boundaries 2 and 3 corresponds to catastrophically fast growth of crack. The value of K with radius of crack 3 - 1400 µm corresponds to the fracture toughness. Figure 4: Fracture surface of Ti6Al4V in gigacycle fatigue regime. 1) a= 150 µm, ΔK = 6.88 MPa  m ≈ ΔK th ; 2) a= 750 µm, ΔK = 21.3 MPa  m; 3) a= 1400 µm, ΔK = 54.1 MPa  m ≈ ΔK 1c . The surface roughness was analysed by interferometer-profiler New View 5010 to establish quantitative characteristics of the fracture surface. Two distinct zones with strongly different roughness were observed (Fig. 5): zone I of the size ~ 100- 300 μm, depending on testing material in the vicinity of the crack origin has high fracture surface roughness, which corresponds to the area of defect initiation and accumulation during cyclic loading; zone II that covers rest of the fracture surface is smoother than the first, corresponds to the crack propagation according Paris law (1). These results confirm the crack initiation mechanism described in [7]. To investigate scale-invariant properties of the fracture surface, one-dimensional profiles with different lengths were analyzed using two-dimensional profiles with the interferometer New View data (Fig.2). Figure 5: Image of the fatigue crack origin in cylindrical samples (Ti6Al4V) by interferometer New View 2-D. Marked zones I and II are the areas of crack initiation and propagation, respectively. Solid lines are cross-sections of surface roughness used for the estimation of scale invariance (the Hurst exponent) The Hurst exponent was defined from the slope of linear portion of the correlation function K(r) in logarithmic coordinates [4, 9-10]:       1/2 2 ( ( ) ( )) H x С r z x r z x r (3) where z (x) is the relief height, depending on the coordinate x; angular brackets denote averaging over x, H is the Hurst exponent. In logarithmic coordinates the slope of the linear plot of this function determines the Hurst exponent. The spatial range of linear part establishes the correlated behaviour of defect induced roughness in the direction of fatigue crack propagation.