Issue 35

E. Dall’Asta et alii, Frattura ed Integrità Strutturale, 35 (2016) 161-171; DOI: 10.3221/IGF-ESIS.35.19 169 (a) (b) (c) Figure 6: Map of the strain along X axis[-] of the elliptical hole with an aspect ratio 0.1, 60° inclined with respect to the load axis. Results computed, in order of appearance, with (a) LSM, (b) SGM, (c) NCORR. (a) (b) Figure 7: Green-Lagrange local strain components along the major axis. (a) elliptical hole with an aspect ratio 0.1 normal to the load axis (axial normal strain = 2.01%); (b) elliptical hole with an aspect ratio 0.1, 60° inclined with respect to the load axis (axial normal strain = 3.36%). C ONCLUSIONS n the present paper, different DIC methods are used to obtain 2D full-field strain maps of plain and notched specimens under tensile loading made of two different highly deformable materials: hot mix asphalt and thermoplastic composites for 3D-printing applications. In the latter specimens, an elliptical hole is introduced to assess the potentiality of the method in experimentally capturing strain gradients in mixed-mode fracture situations. The comparison between the DIC methods being analysed is satisfactory, and the comparison with FEM is good. I