Issue34

K. Nambu et alii, Frattura ed Integrità Strutturale, 34 (2015) 271-279: DOI: 10.3221/IGF-ESIS.34.29 279 [2] Takakuwa, O., Sanada, K., Soyama, H., Evaluation of fatigue crack propagation in surface modification layer by a load-controlled plate bending fatigue tester, Transactions of the Japan Society of Mechanical Engineers, 80 (2014) 275-282. [3] Naoe, T., Konagawa, H., Wakui, T., Futakawa, M., Takeuchi, H., Bending Fatigue Strength of Surface Modified Stainless Steel with Pitting Damage, J. Soc. Mat. Sci., Japan., 57 (2008) 576-582. [4] Ishigami, I., Yokoyama, Y., Miura, K., Uratani, F., Hoshino, H., Relationship between Treating Condition sand Surface Carbon Concentration of Low Carbon Steel Vacuum –Carburized with Propane, J. Soc. Mat. Sci., Japan, 49(11) (2000) 1235-1241. [5] Morimoto, T., Umemoto, M., The Effect of Over-Carburizing on the Fatigue Strength at Edges of Vacuum- Carburized Samples, Tetsu-to-Hagané, 96 (2010) 400-405. [6] Egami, N., Kagaya, C., Inoue, N., Takeshita, H., Mizutani, H., Hybrid Surface modification of SCM415 Material by Vacuum Carburizing and Fine Particle Peening, Transactions of the Japan Society of Mechanical Engineers. A, 66 (2000) 1936-1942. [7] Nambu, K., Saruki, K., Kondo, S., The Influence that Shot Peening and Micro Straight Notch Give to Rotary Bending Fatigue Strength of the High Si Hard-Drawn Wire, Transactions of the Japan Society of Mechanical Engineers, A, 76 (2010) 1936-1942. [8] Kikuchi, S., Nakahara, Y., Dobashi, K., Komotori, J., Effects of FPP/Gas Nitriding Hybrid Surface Treatment on Fatigue Properties of Austenitic Stainless Steel (SUS316), J. Soc. Mat. Sci., Japan, 61 (2012) 680-685. [9] Ochi, T., Kozawa, S., Kubota, M., Crack Propagation Behavior and Change of Residual Stress on the Process of Bending Fatigue Test of Carburized Steel Tetsu-to-Hagané, 97 (2011) 486-492. [10] Egami, N., Yamada, M., Kagaya, C., Fujii, K., Effect of Surface Modification by Tufftriding on Fatigue Strength Behaviors of SM 490 A, Transactions of the Japan Society of Mechanical Engineers. A, 63 (1997) 1829-1836. [11] Sugimoto, K., Sun, X., Kobayashi, M., Haga, T., Shirasawa, H., Fatigue Properties of TRIP-Aided Dual-Phase Sheet Steel, Transactions of the Japan Society of Mechanical Engineers. A, 63 (1997) 717-724.