Issue 28

D. Gentile et alii, Frattura ed Integrità Strutturale, 28 (2014) 42-50; DOI: 10.3221/IGF-ESIS.28.05 50 [4] Klecker, R., Brust, F., Wilkowski, G. M., NRC leak-before-break (LBB.NRC) analysis method for circumferentially through-wall cracked pipes under axial plus bending loads, No. NUREG/CR-4572, US Nuclear Regulatory Commission,WashingtonDC (1986). [5] Rahman, S., Brust, F., Ghadiali, N., Choi, Y. H., Krishnaswamy, P., Moberg, F., Brickstad, B., Wilkowski, G. M., Refiniment and evaluation of crack-opening area analyses for circumferential through-wall cracks in pipes, NUREG/CR-6300, Nuclear RegulatoryCommission (1995). [6] Kishida, K., Zahoor, A., Crack-opening area calculations for circumferential throughwall pipe cracks, NP-5959-SR, Electric Power Research Institute, PaloAlto, CA. USA, (1998) [7] Kumar, V., German, M., Wilkening, W., Andrews, W., deLorenzi, H., Mowbray, D., Advances in elastic-plastic fracture analysis, EPRI Final ReportNP-3607, Electric Power Research Institute, PaloAlto, CA., USA, (1984). [8] Rahman, S., Ghadiali, N., Wilkowski, G. M., Bonora, N., Effects of off-centered cracks and restraint of induced bending caused by pressure on the crack-opening-area analysis of pipes, Nuclear Engineering and Design, 167(1) (1996) 55-67. [9] Firmature, R., Rahman, S., Elastic-plastic analysis of off-center cracks in cylindrical structures, Engineering Fracture Mechanics, 66(1) (2000) 15-39. [10] Iannitti, G., Bonora, N., Gentile, D., Assessment of an engineering approach to the evaluation of the cod of off- centered crack inpipes under bending for LBBdesign, EngineeringFractureMechanics, 81 (2012) 69-79. [11]Gentile, D., Iannitti, G., Bonora, N., COD of off-centered cracks in pipes under bending: experimental measures and model validation, In: Proc. ASME 2013PressureVessels&PipingDivision/K-PVPConference, ASME, ed., ASME pp. PVP2013-97347 (2013).