numero25

H. Askes et alii, Frattura ed Integrità Strutturale, 25 (2013) 87-93; DOI: 10.3221/IGF-ESIS.25.13 93 [21] Kimoto, H., Usami, S., Miyata, H. Relationship between strength and flaw size in glass and polycrystalline ceramics. Japan Soc. Mech. Engng., 51 (1985) 2482–2488. [22] Anw, K., Kim, B.A., Iwasa, M., Ogura, N., Process zone size failure criterion and probabilistic fracture assessment curves for ceramics, Fatigue fract. Engng mater. Struct., 15 (2) (1992) 139-149. [23] Taniguchi, Y., Kitazumi, J., Yamada, T., Bending stress analysis of ceramics based on the statistical theory of stress and fracture location, J. Jap. Soc. Mater. Sci., 38 (1988) 777-782. [24] Nagase, Y., Hoshide, T., Furuya, H., Yamada, T., Room and high temperature strengths for ring specimen of sintered silicon nitride, In: 33 rd Ann. Meeting. Society of Materials Science, Japan, (1984) 150-152. [25] Kirchner, H. P., Gruver, R. M., Sotter, W. A., Characteristics of flaws at fracture origins and fracture stressflaw size relations in various ceramics, Mater. Sci. Eng., 22 (1976) 147-156. [26] Bourne, W.C., Tressler, R.E., Alteration of flaw sizes and K Ic of Si 3 N 4 ceramics by molten salt exposure, In: Int. Symp. Frac. .Mech. Ceram., Plenum, New York 3 (1978) 113-124. [27] Kawai, M., Abe, H., Nakayama, J., The effect of surface roughness on the strength of silicon nitride, In: Proc. Int. Symp. Factors Densification Sinter. Oxide Nonoxide Ceram., Tokyo, (1978) 545-556. [28] Kimoto, H., Usami, S., Miyata, H., Flaw size dependence in fracture stress of glass and polycrystalline ceramics, Japan Soc. Mech. Eng., 841-852 (1984) 34-40. [29] Takahashi, I., Usami, S., Nakakado, K., Miyata, H., Shida, S., Effect of defect size and notch root radius on fracture strength of engineering ceramics, J. Ceram. Soc. Japan, 93 (1985) 186-194. [30] Katayama, Y., Matsuo, Y., Relationship between strength and defect size in alumina, In: 3 rd Symp. High Temp. Mater., Ceramic Soc. of Japan, (1984) 34-38. [31] Iseki, T., Maruyama, T., Hanafusa, K., Suzuki, H., Effect of surface roughness on the bending strength of graphite and alumina at high temperatures, J. Ceram. Soc. Japan, 86 (1978) 547-552.