General Papers
| 3-D finite element analysis of a compact tension shear-specimen under in-plane mixed-mode loading | |
| F. -G. BUCHHOLZ, P. DIEKMANN, H. A. RICHARD, H. GREBNER |
| A calculation of the effective DK under various fatigue loading conditions | |
| J. ZUIDEMA |
| A characterization of glass mat thermoplastic composites for automotive applications | |
| W. J. CANTWELL, H. H. KAUSCH |
| A comparison of the strain energy density and crack tip opening displacement criteria on ductile fracture | |
| G. E. PAPAKALIATAKIS, O. KATSIKJ |
| A life prediction model for creep-fatigue interaction | |
| AM. MEIZOSO, J. M. M. ESNAOLA, J. M. R. IBABE, M. F. PEREZ |
| A method of increasing the brittle fracture resistance for large-size pressure vessel | |
| V. T. TROSHCHENKO, V. V. POKROVSKY, V. G. KAPLUNENKO |
| A new method for detection of crack formation in glass using the electric emission | |
| H. SENF, H. LOVSE, E. STRASSBURGER, G. ZIMMERMANN, B. SALZIGER |
| A possibility of complex estimation of the weld cold cracking resistance | |
| St. CHRISTOV |
| A study on J-R curve behaviour of a copper nickel chromium alloy | |
| R. L. JONES |
| An analysis of the environmental influence on the near-threshold fatigue crack propagation behaviour of steels | |
| G. HENAFF, J. PETIT |
| An assessment of a series of de-embrittlement treatments on a turbine bolt material | |
| J. H. BULLOCK, J. J. HICKEY |
| An automated method of computer-controlled high-cycle fatigue crack growth testing | |
| Z. PEROVIC |
| An evaluation criterion of the residual life of structural elements | |
| V. V. PAN AS YUK, A. Ye. ANDREYKIV |
| An Yugoslav HSLA steel user's experience for elastic-plastic fracture toughness | |
| V. CULAFKS, M. ANDELlC |
| Analysis of dynamic crack growth based on micromechanical models | |
| D. -Z. SUN, A. HONIG, W. SCHMITT |
| Analysis of fracture mechanical tests for stress corrosion cracking | |
| P. KARJALAINEN-ROIKONEN, K. WALLIN |
| Analysis of stress singularities in bi-material interfaces with applications to IC packaging | |
| J. GW. VAN VROONHOVEN |
| Analysis of surface disturbances on polished surfaces of single crystal specimens containing a mode I crack | |
| R. R. NIKOLIC |
| Analysis of underclad cracking on experimental ring of reactor pressure vessel | |
| V. MAGULA, T. SMIDA |
| Applications of knowledge-based systems in structural integrity analysis expectations, trends, results examples | |
| A. JOVANOVlC |
| Applying fracture mechanics to concrete: strength is not enough when concrete goes into hammered piles | |
| M. ELICES, G. V. GUINEA, J. PLANAS |
| Assessment of performance by monitoring in-service changes in materials properties | |
| J. D. PARKER, J. PURMENSKI |
| Asymptotic and numerical analysis of crack tip fields of mode I in steady crack growth with linear hardening materials | |
| W. BROCKS, T. M. GUO, S. FRICKE |
| Calculation of CTOD or J-Delta a curve for a crack in residual stress zone | |
| S. HAO, A. CORNEC, K. H. SCHWALBE |
| Case study of carbamide pump crankshaft failure | |
| B. ALEKSIC, J. KURAI, A. FERTILIO, Z. VOJVODlC |
| Case study of inlet pipeline-drum joint failure | |
| V. SIJACKI-ZERAVCIC |
| Case study of valve fracture of diesel engine locomotive | |
| V. SIJaCKI-ZERAVCiC, L. BACANJI, A. UEVAR |
| Characterization of crack resistance behaviour of polymers with the JTj concept | |
| W. GRELLMANN, S. SEIDLER |
| Computational simulation of non-complanar crack growth and experimental verification for a specimen under combined bending and shear loading | |
| H. THEILIG, P. WIEBE, F. -G. BUCHHOLZ |
| Conservation law of J integral type for multilayered shells | |
| M. VUKOBRAT |
| Controlled crack propagation with externally bonded ligaments | |
| D. A. ZACHAROPOULOS, G. I. POTOGLOU, M. A. KATTIS |
| Correlation of static and dynamic characteristics for toughness estimation of thermoresistant steel | |
| C. CRISTUINEA, I. DUMITRU, P. TRIPA, L. BLAJ |
| Corrosion fatigue of Cr-Ni-Ti steel | |
| T. LIPTAKOVA, O. BOKUVKA, P. PALDEK, M. PRAZAK |
| Crack analysis of cladded mockups in the frame of brittle fracture | |
| G. DEBRUYNE, D. MOINEREAU |
| Crack closure behaviour of 12mm thick titanium grade 2 plates | |
| L. M. PLAZA, A. M. IRISARRI |
| Crack growth by cyclic fatigue in yttria-tetragonal zirconia and silicon nitride ceramics | |
| J. ALCALÁ, L. ITURGOYEN, M. ANGLADA |
| Crack initiation and growth in a 316 L stainless steel cycled between 20°C and 600°C in vacuum | |
| J. MENDEZ, P. VIOLAN, R. ALAIN, M. GERLAND |
| Crack initiation and growth in case of Charpy specimen | |
| K. REIFF, R. ORTMANN, M. KONCZALLA |
| Crack initiation under compression fatigue in lough ceramics | |
| J. SOLIS, C. LAPATRA, J. DOMINGUEZ |
| Crack trajectories during fracture of anchors in rock | |
| A. FATHY, J. PLANAS, J. LLORCA, M. ELICES, G. V. GUINEA |
| Creep behaviour of round Al and AlSi7Mg plates in the temperature range 633-903 K | |
| L. STOJANOVA, K. RUSSEW |
| Creep cracking and rupture of concrete specimens in bending | |
| F. P. ZHOU |
| Cumulative damage effects in fatigue crack growth propagation under variable amplitude loading | |
| H. J. C. VOORWALD, M. A. S. TORRES |
| Cylindrical specimens for evaluating a service component's fracture toughness properties | |
| E. LUCON |
| Damage accumulation, crack initiation and growth in metals under sulfide stress corrosion conditions | |
| V. I. ASTAFJEV, E. B. KASATKIN |
| Damage micromechanical model of a S. M. C. type composite | |
| M. FRANCOIS, M. KEYVANI, D. BAPTISTE, D. FRANCOIS |
| Damage tolerance analysis in critical components | |
| C. M. BRANCO |
| Deformation and fracture of cast iron with ferrite matrix | |
| ZR. HE, S. JI, G. X. LIN |
| Description and analysis of a large diameter carbon steel elbow experiment with a longitudinal surface crack | |
| P. LE DELLIOU |
| Determination of defects depth and porosity in the structure of composite integral foamed plastics | |
| N. L. PIPEROV, R. APETROVA |
| Determination of remain life of short and long fatigue cracks on gears | |
| B. ABERSEK, S. SEDMAK, J. FLA. SKER |
| Developing of knowledge-based system for remaining life assessment for pressure vessels | |
| V. POCAJT |
| Diffusion and permeability coefficients of hydrogen in nitrogen alloyed steels | |
| J. GEORGIEV, CH. MALSEV, IV. JORDANOVA |
| Diffusion welding of metalceramic alloy to steel | |
| S. CHRISTOV, P. TASHEV, Z. KAMENOVA, T. DILOV, N. ALEXIEV |
| Ductile fracture analysis of circumferentially surface cracked pipes under bending | |
| P. LE DELLIOU, E. MEISTER |
| Dynamic fracture and crack arrest behaviour of a pipeline steel investigated with a new specimen geometry: the ring test | |
| T. IUNG, M. DI FANT, A. PINEAU |
| Effect of annealing on the fracture behavior of polystyrene | |
| S. AKKURT |
| Effect of hydrostatic stress in the vicinity of a notch on hydrogen embrittlement | |
| J. TORIBIO, M. ELICES |
| Effect of stress state and texture on delayed hydride cracking; kinetics in reactor pressure tubes | |
| P. F. TIMMINS |
| Effect of sustained load and low loading rate on the tearing resistance of a pressure vessel steel | |
| P. SOULAT, B. HOUSSIN |
| Effects of high temperature austenitization on fracture toughness of C-Mn-B steels | |
| F. F. LOPETEGUI, J. L. R. MARTIN, J. M. RODRIGEZ-IBABE, J. J. U. GALARZA |
| Elastic stress fields in the vicinity of a narrow notch with circular root | |
| G. KULLMER |
| Elastoplastic mechanics of high temperature fatigue crack growth in heat resistant steel | |
| O. N. ROMANIV, G. N. NIKIFORCHYN, O. Z. STUDENT, I. D. SKRYPNYK |
| ESIS recommendations for use of finite element method in fracture mechanics | |
| A. SEDMAK, N. SAVOVIC, M. PAVlSlC |
| Estimation of induced anisotropy resulting from oriented plastic deformation and damage | |
| A. BALTOV, St. VODENITCHAROV, T. STOJTCHEV, Tz. KAMENOVA |
| Estimation of initial damage and fracture properties of powder metallurgy materials | |
| V. PASTUKHOV |
| Evaluation of fatigue crack growth rate | |
| K. M. GOLOS, Z. OSINSKI |
| Evaluation of residual stress in welded steel constructions | |
| A. MILOSAVLJEVIC, R. PROKIC, P. SMILJANIC, M. ZRILIC, P. KERECKI |
| Evaluation of residual stresses in welded steel constructions | |
| A. MILOSAVLJEVlC, R. PROKlG, P. SMIUANlC, M. ZRILlC, P. KERECKI |
| Evaluation of static and dynamic R curve using DC potential drop single specimen method | |
| V. GRABULOV, H. J. MacGILLIVRAY, D. TOMIC |
| Evaluation of stress concentration factors at the cut-outs of locating pins of compressor fan disc | |
| B. J. RAGHUNATH, N. GOVINDARAJU, T. G. NAGARAJU, K. RAMACHANDRA |
| Evaluation of the behavior of heat treated low-alloy V-N steel | |
| K. MINCHEV |
| Evaluation of thermal and acoustic emission of composites by means of local strain measurements | |
| C. BIEROGEL, W. GRELLMANN |
| Experimental determination of DKeff | |
| G. MARCI |
| Experimental determination of the failure parameters TD,o and TV,o in mild steels according to the T-criterion | |
| N. P. ANDRIANOPOULOS, A. G. ATKINS |
| Exponent of deformation hardening and the process zone in HSLA steel | |
| L. PARILAK, J. DOJCAK |
| Fast crack growth - a new theoretical approach | |
| Z. LIS |
| Fatigue analysis of longitudinal fillet welded joints | |
| J. M. FERREIRA, C. M. BRANCO |
| Fatigue behavior of short cracks | |
| M. BRANCO |
| Fatigue crack growth along a flash welded joint between a high strength and a low strength steel | |
| F. AVEER, F. P. DRIJVER |
| Fatigue crack growth and closure behaviour of pressure vessel C-Mn steel weldments | |
| M. A. L. ABERASTURI, J. M. RODRIGUEZ-IBABE, M. F. PEREZ |
| Fatigue crack propagation in resonating machine members at elevated room temperatures | |
| A. J. DENTSORAS, S. PANTELIOU |
| Fatigue cracks in a normalized carbon steel under multiaxial low cycle fatigue | |
| H. BOMAS, M. LOHRMANN, G. LOWISCH, P. MAYR |
| Fatigue damage under non-stationary stochastic strain | |
| M. BILY, J. PROHACKA, S. ILLES |
| Fatigue fracture of cyclosymmetric systems | |
| A. I. KIRICHENKO, A. I. SHEPEL |
| Fatigue strength of an ion-nitrided steel | |
| A. ONUKI, N. YANAGI, N. SATOH, F. TAKASE |
| Fatigue tests of cruciform specimens under random loadings, construction of the stand and preliminary results | |
| W. BEDKOWSKI, E. MACHA |
| Fracture analysis of liquid ammonia tanks produced of low alloy steel | |
| D. KAKAS, B. SABO, V. BAJIC |
| Fracture criteria for hydrogen and temper embrittlement in 9CrlMo steel | |
| M. WALL, C. E. LANE, C. A. HIPPSLEY |
| Fracture mechanics of weldments: microstructural, experimental and mechanical aspects | |
| M. KOQAK, K. -H. SCHWALBE |
| Fracture mechanisms at geometry changes | |
| M. J. M. van DER ZWET |
| Fracture mechanisms selforganization and fracture threshold parameters of low-alloyed steels under low testing temperatures | |
| S. A. KUNAVIN |
| Fracture of Cu-Al-Ni shape memory alloys | |
| A. CHEREPIN, I. LUSHANKIN, E. PECHKOVSKY |
| Fracture of metals as a random process | |
| D. G. ANGELOVA, A. B. DISHLIEV, I. G. VASILEV, L. S. SLAVTCHEVA |
| Fracture of SiSiC-ceramics under biaxial loading | |
| K. STIEBLER, E. STAS- KEWITSCH, M. BREDE |
| Fracture resistance of cracked welded joint | |
| T. ADZlEV, J. GOCEV, J. CVETKOVSKI, S. SEDMAK |
| Fracture toughness of molybdenum sheet under brittle-ductile transition | |
| A. Yu. KOVAL, A. I. BANKOVSKI |
| Fretting: a limitation for development of new materials | |
| S. FAYEULLE, A. B. VANNES, L. VINCENT |
| High temperature creep of Fe40Ni40B20 amorphous alloy under nonisothermal conditions | |
| K. RUSSEW, L. STOJANOVA |
| Holographic diagnostics of welded joints of structures | |
| L. M. LOBANOV, V. A. PIVTORAK |
| Hydrogen assisted cracking in pearlitic steel: influence of yield strength | |
| J. TORIBIO, A. M. LANCHA, M. ELICES |
| Importance of knowing fracture toughness and fatigue strength of railway rails | |
| I. VITEZ, B. TODlC |
| Improved methodology to determine lower bound HAZ CTOD toughness | |
| K. WALLIN, M. HAUGE |
| In service crack detection and repair in welded spherical storage tank | |
| A. FERTILIO, B. ALEKSlC, J. KURAI, B. VUJOVlC-DORDEVlC |
| In situ mid-width and near-surface measurements of the retardation of the propagation of a crack after an overload | |
| Y. PARK, D. DE VADDER, D. FRANCOIS |
| Influence of microstructure on toughness of an austempered ductile iron | |
| J. ARANZABAL, I. GUTIERREZ, J. M. RODRIGUEZ-IBABE, J. J. URCOLA |
| Influence of the microstructure on strain aging of C-Mn steels | |
| D. WAGNER |
| Interlaminar fracture toughness of a carbon-fiber reinforced composite under mixed-mode conditions | |
| G. STEINMETZ, F. J. ARENDTS |
| Investigation of boiler steel microstructure after creep fracture | |
| V. SIJACKI-ZERAVClÓ, A. MILOSAVLJEVlC, A. MARKOVIC, P. SMILJANIC |
| Investigation of crack initiation and propagation using the electroinductive method | |
| P. I. BARZAKOV, M. S. ALBRZAWI |
| Investigation of geometry and mechanical surface hardening influences on screws fatigue strength | |
| N. PLAVSlC, R. MITROVlC |
| Investigation of the influence of loading rate on fracture toughness of steel used in gas pipe line | |
| G. KORTENSKI |
| Investigation on the influence of component geometry on stress state using 3-dimensional elastic-plastic finite element analysis | |
| C. HAFER, W. DAHL |
| Irradiation embrittlement of reactor pressure vessels of WWER440/V230 | |
| Tz. Z. KAMENOVA, T. V. STOJCHEV |
| J integral and final stretch zone for a crack in HAZ of undermatched and overmatched weldments | |
| K. GERIC, I. GLAVARDANOV, S. SEDMAK |
| J-integral R-curves and SZW-SZH relations in duplex stainless steels aged at 475° C | |
| L. ITURGOYEN, J. ALCALÁ, M. ANGLADA |
| Laser damages of transparents materials and holographic methods of recording | |
| M. SRECKOVIC, S. RISTIC, D. MAMULA, N. IVANOVlC, A. MILOSAVUEVIC |
| Load histories and spectra and prediction of fatigue strength in forklift structures | |
| K. G. KOSTOV |
| Local fracture of thin aluminium foil | |
| F. KOSEL, L. KOSEC |
| Locally and fully coupled approaches to I he rupture of brittle materials | |
| F. HILD, D. MARQUIS |
| Measuring the residual stresses in welded joints by magnetic-elastic method | |
| S. CHRISTOV, K. TODOROV |
| Mechanical and thermal properties of metal - particulate filled polymers | |
| I. H. TAVMAN |
| Mechanical properties - microstructure interconnection in alumina-zirconia ceramics | |
| V. IVANOVA-STANKOVA, V. PETKOV, R. VALOV |
| Mechanical properties and microstructure of Zn-AI-Cu cast alloys | |
| S. ZADGORSKY, Z. KAMENOVA |
| Mechanics of microdefected materials | |
| V. Z. PARTON |
| Mechanisms and mechanics of damage in composites | |
| D. FRANCOIS |
| Metallography of notched weldment specimens fractured in HAZ | |
| N. NOVOVlC- SIMOVIC, N. VIDOJEVIC, S. CVETKOVSKI |
| Micromechanisms of fracture – the role of microstructure | |
| J. F. KNOTT |
| Microscopic observations on the fracture initiation at hydrides in zircaloy-4 | |
| J. B. BAI, C. PRIOUL, D. FRANCOIS |
| Microstructural aspects of strength and plasticity of nitrogen alloyed weld metal in tensile and impact tests | |
| G. ZLATEVA B. SIMEONOVA, A. ZHELEV |
| Mixed-mode fracture of stainless steel 316L : J-R curves and R6 method | |
| K. L. JEON, B. MARINI, D. FRANCOIS |
| Model fatigue test of bolted joint of a strut of bracing to the bucke wheel lattice girder of the large rotary excavator | |
| V. PENOV, G. MIJATOVlC, M. ZRILlC |
| Modified C' integral for multi-material bodies | |
| M. PAVlSlC, A. SEDMAK, N. SAVOVIC |
| Nature of fatigue striation and effective threshold | |
| Yu. I. RAGOZIN |
| New amorphous Fc85-xMexB15 - alloys with favorable combination of invar and elastic properties | |
| K. RUSSEW, L. STOJANOVA |
| Nitrogen contents effect on crack resistance of some steels | |
| St. B. VODENICHAROV |
| Nitrogen influence on mechanical properties of steel for threaded connection elements | |
| Y. A. DAVIDOV, St. G. KOLEV, Hr. ARGIROV |
| Non-destructive analysis of ferromagnetic materials by means of Barkhausen effect methods | |
| G. VELEV |
| Nonlinear model of interlaminar defects in composite shells | |
| N. I. OBODAN |
| Numerical and experimental study for failure analysis of layered composite structures | |
| S. M. MAKSIMOVlC, Z. BURZIC |
| Numerical calculation of fracture mechanical weight functions for cracks in finite bodies | |
| M. BUSCH, H. MASCHKE, M. KUNA |
| Numerical investigation of the creep damage rupture in metals | |
| R. IANKOV, M. DATCHEVA |
| Numerical methods in the development of die ejector pins with sufficient life expectancy | |
| D. KECMAN, M. RASHIDY, R. VÏGNJEVIC, P. MALONE |
| Observation and modelization of the mechanisms of fracture of an aged duplex stainless steel | |
| P. JOLY, A. PINEAU |
| On path-independent integrals for dynamic fracture | |
| J. GW. van VROONHOVEN |
| On the inelastic behaviour and the failure mechanisms in fibre - reinforced composites | |
| K. P. HERRMANN, I. M. MIHOVSKY |
| On the influence of higher order terms of stress field equations in transient fracture problems | |
| J. F. KALTHOFF, P. COLLISON, J. VOYVODA, H. DAHMEN |
| On the shape of the softening function for concrete | |
| G. V. GUINEA, M. ELICES, J. PL ANAS |
| Optimal design of plates and shells when accounting for material damage | |
| O. MINCHEV, R. KAZANDJIEV |
| Peculiarities of the properties of high-nitrogen stainless steel welds | |
| St. CHRISTOV, V. USHEV, Z. MANILOV |
| Plastic damage in round notched tensile bar using continuum damage mechanics | |
| N. BONORA, M. MARCHETTI, P. P. MILELLA |
| Polynomial expressions of the stress intensity factor for a cracked bolt | |
| J. TORIBIO |
| Probabilistic models of fatigue design | |
| J. DJUBEK |
| Probabilistic reliability analysis of steamline with defect in welded joint | |
| M. SARVAN |
| Probability approach to the reliability concept of vehicle structures | |
| M. MATOLCSY, C. S. MOLNAR |
| Problems in ultrasonic testing of forged rotor pieces | |
| M. BOGOJEVlC, B. IGNJATOVlC |
| Problems of corrosion fracture mechanics and metal protection | |
| V. V. PANASYUK, L. V. RATYCH |
| Problems of materials processing and joining | |
| I. HRIVNAK |
| Rate and size effects on the fracture toughness of a titanium alloy | |
| L. BRAGA, H. MacGILLIVRAY, C. TOOMBS |
| Relation between the microstructure and mechanisms involved in the fracture and SH2 embrittlement of a duplex stainless steel | |
| E. ERAUZKIN, A. M. IRISARRI |
| Reliability analysis of Kaplan turbine critical components | |
| N. GRUJIC, D. MOMCILOVIC |
| Reliability analysis of RC structures | |
| A. MEBARKI |
| Reliability and fracture of metallic materials under the influence of stress and environment | |
| A. MAZUR |
| Reliability based failure analysis for the eastern Scheldt barrier steel doors | |
| O. D. DIJKSTRA, H. J. M. VAN RONGEN, S. E. VAN MANEN |
| Residual life considerations of the Babock-Wilcox type pressure vessels | |
| M. TRUSCULESCU, V. BUDAU, C. CRISTUINEA |
| Residual life prediction of the rotating disks of the aircraft engines | |
| V. N. SHLYANNIKOV, B. V. ILTCHENKO, V. B. BURMISTROV |
| Residual stresses in bonded dissimilar materials | |
| D. MUNZ, Y. Y. YANG |
| Resistance to fracture of AlZnMgCu high strength alloys | |
| B. VELJANOVSKI, S. SEDMAK, A. RADOVIC, M. PAVLOVIC |
| Results and analysis of local criteria experiments in the scope of ESIS round robin | |
| M. ZRILIC, S. SEDMAK, A. SEDMAK |
| Results and numerical analysis of local criteria round robin | |
| M. VRHOVAC, Z. JOKANOVIC, A. SEDMAK, N. SAVOVIC |
| Selected properties of the composite aluminium+steel+aluminium alloy manufactured according to the explosive welding process | |
| T. LESZCZYINSKI |
| Sensitivity of the load carrying capacity of plastic products to the material model parameters | |
| W. SMIT |
| Stable crack growth of surface cracks in components | |
| W. BROCKS |
| Stohastic fatigue crack growth problem of HSLA steel weldments | |
| J. LEGAT, N. GUBELJAK, C. PRIMEC |
| Strain rate dependence on surface crack propagation in elasto/visco-plastic material | |
| H. SAKAMOTO, H. SAIKI |
| Strength and fracture toughness of S13N4 metal joints with phase transforming interlayer metal | |
| Y. MUTOH, C. ANDO, Y. MITAMURA, Y. HIROTSU |
| Strengthening model of aluminum alloys during impulse compression | |
| V. N. POLYAKOV, V. GEMINOV, A. I. CHISTYAKOV, R. L. KYRILKIN, I. I. TURAEVA |
| Stress analysis in welded butt joints | |
| O. S. YAHSI, E. AYDIN |
| Stress concentration evaluation near thin elastic inclusions | |
| M. M. STADNYK, N. V. KUZNYAK |
| Stretch zone measurements on ductile steels | |
| H. BLUMENAUER, J. UDE |
| Structural changes and cracking resistance of foamed thermoplastics subjected to chemically active liquids | |
| N. L. PIPEROV |
| Structural integrity of advanced composites | |
| D. M. R. TAPLIN, G. WEST, J. O'DWYER, D. PLANE, J. SUMMERSCALES |
| Structure-sensitive model for the evaluation of fracture toughness characteristics for titanium alloys | |
| V. V. POKROVSKY, V. T. TROSHCHENKO, V. T. YARUSEVTCH |
| Tearing stability of surface cracks in plates or shells | |
| H J. SCHINDLER |
| Teststar - the materials testing workstation: a new versatile, high performance, multiprocessing controller for servohydraulic systems | |
| F. W. NEIKES, G. C. SMITH |
| The acousto-ultrasonic approach to the characterization of the mechanical performance of engineering materials and structures | |
| Y. M. HADDAD |
| The application of a local approach to intergranular brittle fracture of low alloy steels | |
| E. KANTIDIS, B. MARINI, P. SOULAT, A. PINEAU |
| The application of holographic interferometry for wind tunnel windows testing | |
| S. RISTIC, M. SRECKOVIC, A. MILOSAVLJEVlC, D. VRACARIC, B. ANDJELIC |
| The calculation of the necessary radius of crack arresting boreholes | |
| M. WINGENBACH, H. A. RICHARD |
| The driving force for rapid crack propagation along pressurised pipelines | |
| P. S. LEEVERS, G. VENIZELOS, A. lVANKOVlC |
| The dynamic calibration problems in instrumented impact testing | |
| Gy. B. LENKEY, Z . MAJOR, H. W. VIEHRIG |
| The effect of a prior cyclic strengthening on the subsequent fatigue behaviour of polycrystalline copper | |
| J. MENDEZ, P. VIOLAN, M. GHAMMOURI |
| The effect of deep unloadings on the Jr resistance curve | |
| V. CULAFlC |
| The effect of geometry changes in plastic products | |
| A. J. HEIDWEILLER |
| The effect of residual and service stresses superposition on the stress state of the pressure vessel circular weldment | |
| B. SABO, S. SEDMAK |
| The evaluation of brittle fracture behavior of high strength steels weldments | |
| A. RADOVIC, S. SEDMAK, V. GRABULOV, B. VEUANOVSKI |
| The evaluation of fracture toughness on SENB specimens with shallow cracks | |
| J. LEGAT, C. PRIMEC, N. GUBEUAK |
| The influence of deformation on the temperature dependence of fracture toughness of chromium alloy | |
| N. DANILENKO, Y. PODREZOV |
| The influence of hydrogen treatment on dynamic crack resistance of 10G2SAF steel | |
| G. KORTENSKI |
| The influence of microstructure on the mechanical properties and fracture toughness of ADI | |
| L. SIDJANIN, R. E. SMALLMAN, S. M. A. BOUTORABI, K. GERIC |
| The local approach to the effect of notch depth on fracture toughness | |
| C. RUGGIERI, F. MINAMI, M. TOYODA |
| The nonlinear behaviour of PMMA | |
| L. ZHANG |
| The temperature dependence of yield strenght in LI2 intermetallic compounds | |
| AH. W. NGAN, I. P. JONES, R. E. SMALLMAN |
| The treatment of fracture toughness data in the transition regime | |
| B. KNEALE |
| The weldability of the stainless and heat-resistant steels used in the manufacturing of agabaritic vessels | |
| M. TRUSCULESCU, V. BUDAU |
| Through thickness fracture property variation in 50mm HSLA steel plate | |
| N. S. WRIGLEY, J. BUTLER, G. JOLLEY |
| Tribology properties of high strength zinc alloy ZA12 | |
| S. ZADGORSKY, K. IVANOV, Z. KAMENOVA, R. KOVATCHEVA |
| Two-parameter Jj'c-failure criterion for bodies with cracks | |
| Yu. G. MATVIENKO |
| Two-stage model of intergranular crack lip branching | |
| J. POKLUDA, P. SANDERA |
| Type IV cracking in low alloy steel weldments | |
| J. D. PARKER |
| Variable amplitude loading fatigue life predictions of a particle reinforced aluminum matrix composite | |
| V. OGAREVIC, R. STEPHENS |