General Papers
| 2D and 3D Simulation of Ductile Crack Propagation by Plastic Collapse of Micro-ligaments | |
| Geralf Hütter, Lutz Zybell, Uwe Mühlich, Meinhard Kuna |
| A Critical Study of an Alternative Method to Measure Cohesive Properties of Adhesive Layers | |
| Anders Biel, Ulf Stigh, Tomas Walander |
| A multi-scale brittle fracture modelling for irradiated RPV materials | |
| Victoria Shvetsova, Boris Margolin, Alexander Gulenko |
| A new interpretation of the loading path effect in high cycle fatigue via numerical simulation of polycrystalline aggregate | |
| Raphaël Guerchais, Camille Robert, Franck Morel, Nicolas Saintier, Thierry Palin-Luc |
| A new SEM in-situ fatigue testing apparatus and its application for evaluation of damage at higher load cycles | |
| Johannes Reiser, Ch. Motz, Reinhard Pippan, Ch. Guster |
| A New Technique for Enhancement of Fatigue Life of Bolt-nut Connections | |
| Gholam Hossein Majzoobi, Farzad Farahi |
| A statistical model of a stranded fiber bundle | |
| Dmitry Onishchenko Jr. |
| A theoretical model to describe the influence of material microstructure on fatigue crack propagation | |
| Roberto Brighenti, Andrea Carpinteri, Andrea Spagnoli |
| A unified analysis of the in-plane and out-of-plane constraints in 3-D linear elastic fracture mechanics | |
| Alfonso Fernández-Canteli, E. Giner, D. Fernández-Zúñiga, J. Fernández-Sáez |
| Acoustic and Magnetoacoustic Emission during Deformation of Steel | |
| Bohdan Klym, Valentin Skalsky, Roman Basarab, Sviatoslav Hirnyj |
| Acoustics emission diagnostics of bridges | |
| Valentin Skalsky, Zinoviy Nazarchuk, Denys Rudavskyy, Oleg Sergiyenko |
| Adequate Measurement of Force, Displacement and Crack Initiation in Dynamic Fracture Mechanics Experiments | |
| Wolfram Baer |
| Adhesive bonded Structures – a life in the light of continuum mechanics? | |
| Stephan Froemmel, Hans-Joachim Gudladt |
| An efficient nonlocal treatment for damage modeling based on the background mesh concept | |
| H. Li, X. Pan, Huang Yuan |
| An evaluation of the temperature dependence of cohesive properties for two structural epoxy adhesives | |
| Tomas Walander, Anders Biel, Ulf Stigh |
| An experimental study of the disc-jaw relative displacement along the contact length in a standardized Brazilian disc test using 3D DIC | |
| Stavros Kourkoulis, Evangelia Ganniari-Papageorgiou, Panagiotis Chatzistergos, Christos Markides |
| An Experimentally Based Characterization of Solar Cell Structure Defects by Means of Noise and Optical Activities Analysis | |
| Robert Macku, Pavel Koktavy |
| An Intermediate Asymptotic Solution of the Coupled Creeep-Damage Crack Problems in Similarity Variable | |
| Larisa Stepanova |
| Analysis of local failure modes and subsequent scenarios of global failures of complex technical systems | |
| Dmitry Reznikov |
| Analysis of micro-mechanical damage in tool steels coupling fracture mechanics and acoustic emission | |
| Ingrid Picas, Eva Martínez-González, Daniel Casellas, Jordi Romeu |
| Analysis of some calculation factors effect on the fracture resistance assessment for NPP main equipment elements | |
| Valeriy Kharchenko, A.Yu. Chirkov, S.V. Kobelsky, Viktor Kravchenko |
| Analysis of the mesoscopic high cycle fatigue strength of FCC metals with polycrystalline plasticity and extreme value probability methods | |
| Anis Hor, Nicolas Saintier, Camille Robert, Thierry Palin-Luc, Franck Morel |
| Analysis of Two Nonlocal Criteria of Bridged Cracks Growth | |
| Mikhail Perelmuter |
| Analytical and experimental determination of the fracture toughness by means of Small Punch Test specimens notched with a femtolaser | |
| Inés Peñuelas, Cristina Rodríguez, Javier Belzunce, C. Betegón |
| Analytical and Numerical Modeling of Curvilinear Crack Approaching a Bi-material Interface at Arbitrary Angle | |
| Andrey Andreev, Amin Aminian |
| Analytical Solution of the Crack Problem for the Inhomogeneous Materials Taking into Account the Independent Changes, as the Elastic modulus and Poisson's ratio | |
| Irina Trubchik, Sergey Aizikovich, Leonid Krenev |
| Applicability of a FIB-notch as a Small Initial Crack for Fatigue Limit Evaluation | |
| Junji Sakamoto, Yoshimasa Takahashi, Hiroshi Noguchi |
| Application of Magnetoacoustic Emission for Detection of Hydrogen Electrolytically Absorbed by Steel | |
| Yevhen Pochapskyy, Zinoviy Nazarchuk, Valentin Skalsky, Sviatoslav Hirnyj |
| Application of thermo-elastic dislocation on a cracked layer under temperature field | |
| Mohammad Ravandi, Seyed Mahmoud Mousavi, Shahriyar Fariborz |
| Aspect ratio evolution in corrosion-fatigue cracking of high strength steel bars | |
| Jesus Toribio, J.C. Matos, B. González, J. Escuadra |
| Assessment of Fracture Mechanical Characteristics Including Welding Residual Stress at the Weld of Ni base Super Alloy 617 | |
| Young Su Park, Tae Kyun Kim, Dong Ho Bae |
| Autowave Model of the Transition from Stable Plastic Flow to Ductile Failure in Solids | |
| Lev Zuev |
| Big disasters analysis in problems of technical systems safety | |
| Nikolay Makhutov |
| Biological Degradation of the Hierarchical Structure and Fracture Properties of Human Bone with Aging and Disease | |
| Robert Ritchie |
| Changes in the SSRT Plasticity Parameters of Low-Carbon Steel with Polarization Potential in Carbonate-Bicarbonate Solution | |
| Sviatoslav Hirnyj, Michael J. McNallan |
| Characteristics degradation of gas transmission pipeline steel welded joints due to long-term operation | |
| Olha Zvirko, O.T. Tsyrul’nyk, V.A. Voloshyn |
| Characterization of the Different Stages of Damage Evolution and Crack Growth in Pure Nickel during Ultrasonic Fatigue | |
| Martina Zimmermann, Anton Kolyshkin, Hans-Jürgen Christ |
| Characterization of the microstructure, strain rate dependent material and fracture toughness behavior of a high strength Fe85Cr4Mo4.9V2.1W2.7C1.4 steel | |
| Markus Ruessel, Stefan Martin, Lutz Krüger, Wolfgang Kreuzer |
| Chessboard-like buckling modes of plates on elastic foundation | |
| Stanislava Kashtanova, Nikita Fedorovich Morozov, Petr Evgen'evich Tovstik |
| Collective behavior of defects and criticality of damage-failure transitions | |
| Oleg Naimark |
| Compact shear specimen for mode ii fracture tests: theoretical modeling and analysis | |
| Vera Petrova, Tomasz Sadowski |
| Comparison of the Size-Independent Fracture Energy of Concrete Obtained by Two Main Experimental Methods | |
| Hector Cifuentes, Maria Alcalde, Fernando Medina |
| Comparison of viscoelastic moduli fitting using optimization methods | |
| Fernandez Pelayo, Alvaro Noriega, Maria-Jesus Lamela, Alfonso Fernández-Canteli |
| Consideration on the mechanisms causing reduction in fretting fatigue strength by hydrogen | |
| Masanobu Kubota, Ryosuke Komoda, Jader Furtado |
| Constraint analysis of Curved Wide Plate specimens | |
| Matthias Verstraete, Wim De Waele, Stijn Hertelé, Rudi Denys |
| Construction of Diagrams for Quasi-brittle and Quasi-ductile Fracture of Materials Based on Necessary and Sufficient Criteria | |
| Vladimir Kurguzov, Vladimir Kornev |
| Contact strength of solids with periodic relief under partial frictional slip | |
| Irina Goryacheva, N.I. Malanchuk, K.A. Martynyak, Kostyantyn Chumak |
| Corrosion on the deformed surfaces | |
| Rishat Giniyatullin, Nukh Yakupov, Samat Yakupov |
| Crack Growth Resistance of Steel of the Main Circulating Pipeline of Nuclear Power Plant Cooling Contour | |
| Leonid Sosnovskiy, Alexander Bogdanovich, Sergei Sherbakov |
| Crack propagation criterion for a pre-stressed elastic composite subjected by tangential forces | |
| Eduard-Marius Craciun, Adrian Rabaea, Liviu Marsavina, Ionel Nicolae, Erol Carjali |
| Crack propagation engineering model: stress intensity dependence of crack growth rate in hydrogen embrittlement material | |
| Pavel Tarakanov, Georgy Shashurin |
| Crack propagation in a stiffener-to-deckplate connection of an orthotropic steel bridge deck | |
| Wim Nagy, Hans De Backer, Philippe Van Bogaert |
| Crack propagation peculiarities in steels at Charpy and disc-shaped specimens tests | |
| Valeriy Kharchenko, Evgeniy Kondryakov, A. Panasenko |
| Critical J-integral based fracture toughness of 15-5PH after different heat treatment history | |
| Jikai Liu, Michel Coret, Alain Combescure |
| Cyclic Elasto-Plastic Fracture Diagram as Applied to a Specimen with Crack | |
| Leonid Sosnovskiy, Alexander Bogdanovich, Sergei Sherbakov |
| Damage accumulation in mild steel under mode I, mode II and mixed mode I-II loading conditions | |
| Luidmila Botvina, Alexey Soldatenkov, Marat Tyutin |
| Damage amplification due to singularly interacting nearby microcracks and cavities | |
| Xanthippi Markenscoff, Cristian Dascalu |
| Damage and fracture under dynamic loading on the example of a model space nuclear powerplant | |
| Evgeny Kraus, Ivan Shabalin |
| Damage Evolution in Pure Bending of Viscoplastic Sheets | |
| Sergei Alexandrov, Lihui Lang |
| Damage evolutions in sinter powder metals | |
| Huang Yuan, Songyun Ma, M. Schneider |
| Damage extension and failure of polyurethane foams through bands of deformation | |
| Dragos-Alexandru Apostol, Dan Mihai Constantinescu, Emanoil Linul, Liviu Marsavina |
| Damaged welded pipes for oil and gas rigs exposed to internal pressure - failure estimation | |
| Marko Rakin, Miodrag Arsi?, Živ?e Šarko?evi?, Bojan Medjo, Aleksandar Sedmak |
| Defect induced scaling in gigacycle fatigue | |
| Vladimir Oborin, Mikhail Bannikov, Oleg Naimark, Thierry Palin-Luc |
| Defect induced structural transitions, instability and plastic strain localization in dynamically loaded metals | |
| Mikhail Sokovikov, V.V. Chudinov, Sergey Uvarov, Oleg Plekhov, Elena Lyapunova, Oleg Naimark |
| Defect tolerance of brazed steel components under quasi-static and cyclic loading | |
| Michael Koster, Adrian Lis, Hans-Jakob Schindler, Christian Leinenbach |
| Defining the Fracture Toughness for Small-sized Samples of Materials with Submicrostructure | |
| Yevgeny Deryugin |
| Deformation and fracture in the layer of geomaterial under shear foundation | |
| Yurii Stefanov, Rustam Bakeyev |
| Deformation and Fracture of Crosslinked Polystyrene particles | |
| Jianying He, Zhiliang Zhang, H. Kristiansen |
| Deformation and fracture of fragile anisotropic materials and designs under dynamic loading | |
| Andrey Radchenko, Pavel Radchenko |
| Delamination of the Soft Coatings of Complicated Structure from the Hard Substrate Caused by Torsion or Indentation | |
| Sergey Aizikovich, Leonid Krenev, Andrey Vasiliev, Sergey Volkov |
| Dependence of microtextural orientation on applied fatigue loading in shot-peened aluminium | |
| David Asquith, Andrew Wilson, S. Hasan |
| Determination of Effective Stress Intensity Factor Range of Mode II Fatigue Crack Propagation with Improved Experimental Method | |
| Minjian Liu, Shigeru Hamada |
| Determination of opening mode stress intensity factor in edge cracked specimen by means of digital shearography | |
| Danial Ghahremani, Ali Gallehdari, Saeid Hadidi-Moud |
| Determining Local Crack Growth Rates for Small Cracks in a graded ferritic martensitic steel | |
| Tobias Sebastian Stein, S. Wagener, F. Zeismann, Angelika Brueckner-Foit |
| Determining the condition of material for tension bar bucket wheel excavator operating under dynamic working conditions | |
| Darko Danicic, Tasko Maneski, Dragan Ignjatovic, Slobodan Mitrovic |
| Development of a discrete element approach for numerical study of features of fracture of composites with multiscale internal structure | |
| Sergey Psakhie, Evgeny Shilko, Vladimir Ovcharenko, Sergey Astafurov |
| Development of a FE-based fracture mechanical method for fatigue life assessment of double-submerged welded pipelines considering residual stresses and local microstructures | |
| Bernd Maier, B. Oberwinkler, R. Tichy, W. Ecker |
| Development of a formalism of discrete element method for numerical modeling of fracture of heterogeneous elastic-plastic materials | |
| Evgeny Shilko, Sergey Psakhie, Alexey Smolin, Sergey Astafurov |
| Development of fatigue damage in ultrafine-grained copper | |
| Lucie Navrátilová, Ludvík Kunz |
| Development of High-Performance Electric Strain Gage for High-Pressure Hydrogen Gas Use | |
| Takashi Matsuo, Hiroaki Furukawa, Katsuo Seki, Kiyoaki Shimizu, Shogo Watanabe, Saburo Matsuoka |
| Development of ideas about graded nature of material deformation affected by network of thermal fatigue cracks | |
| Sergey Panin, Pavlo Maruschak, Pavel Lyubutin, Igor Konovalenko |
| Diffusive Hydrogen Distribution Simulation on Microstructure Scale in High Strength Weld Metal Containing Retained Austenite | |
| Yoshiki Mikami, Noriyoshi Kubota, Masahito Mochizuki |
| Discrete simulation of defect flows and fragmentation of 2D interfaces under contact interaction | |
| Dmitry Moiseenko, Sergey Panin, Elena Iriskina, Pavel Maksimov, Stanislav Kupriyanov, Irina Goryacheva |
| Domain failure assessment diagrams as tool for defect assessment of gas pipes | |
| Guy Pluvinage, J. Capelle, C. Schmitt, M. Mouwakeh |
| Dramatic rock embrittlement by rising confining stress at triaxial compression; experimental results, brittleness criteria, embrittlement mechanism. | |
| Boris Tarasov |
| Ductile Fracture of 7075-T651 Aluminum Alloy | |
| Seyed Farhad Hosseini, Saeid Hadidimoud |
| Ductile to Brittle Transition in Magnesium Alloy with a Crack | |
| Toshiyuki Ishina, Shigeru Hamada, Hiroshi Noguchi |
| Durability Assessment of Welded Dissimilar Pipes with Corrosion Defects Based on Different Failure Criteria | |
| Orest Bilyy |
| Durability estimations for in-service titanium compressor disks subjected to multiaxial cyclic loads in low- and very-high-cycle fatigue regimes | |
| Nikolay Burago, Ilya Nikitin, Andrey Shanyavskiy, Aleksey Zhuravlev |
| Dynamic Fracture of Asphalt as a Result of Automobile Tire Studs impacts | |
| Vladimir Bratov, Yuri Petrov |
| Dynamic Initiation Fracture Toughness Determination and Full-field Strain Measurements of Rock Material | |
| Qianbing Zhang, Wei Wu |
| Effect of aqueous corrosion on the high cycle fatigue strength of a martensitic stainless steel | |
| Mohamed El May, Thierry Palin-Luc, Nicolas Saintier, O. Devos |
| Effect of corrosion exposure on the tensile mechanical properties of aluminum alloy 2024 electron beam welds | |
| Nikolaos Alexopoulos, Panagiotis Skarvelis, Stavros Kalogeropoulos, Alexandra Karanika, Vasilis Stergiou |
| Effect of high temperature water environment on fatigue crack resistance of carbon and low alloy steels | |
| Evgeny Grin', Alexander V. Zelenskiy |
| Effect of Hole Size on the Fracture of Graphene Nanomesh | |
| H. Y. Zhang, J.Y. Wu, Jianying He, Zhiliang Zhang |
| Effect of hydrogen on plastic strain localization and failure in single crystals of austenitic stainless steel | |
| Lev Zuev, Svetlana Barannikova |
| Effect of hydrogenating environment on crack growth and fractographic peculiarities of the RPV steel | |
| Myroslava Hredil, Oleksandra Student |
| Effect of Microstructure on the Fracture Toughness of Polycrstalline Diamond and Polycrystalline Cubic Boron Nitride | |
| Declan Carolan, Declan McNamara, Patricia Alveen, Neal Murphy, Alojz Ivankovic |
| Effect of Residual Stresses Induced by Bending on Fatigue Crack Initiation | |
| Nenad Gubeljak, Jozef Predan, Andrej Likeb |
| Effect of surface layer depth on fatigue life of carburized steel and analysis of fracture process | |
| Stepan Major, L. Jakl |
| Effect of triaxial stress state produced by notches on the directionality of hydrogen diffusion | |
| Jesus Toribio, D. Vergara, M. Lorenzo, V. Kharin |
| Effects of Notch Root Radius and Stress Ratio on the Fatigue Crack Propagation Threshold for the Short Crack at Notch Root | |
| Akimitsu Seo, Masanobu Kubota, Yoshiyuki Kondo |
| Effects of the Cohesive Law in Ductile Crack Analysis using Cohesive Zone Models | |
| X. Li, Huang Yuan |
| Elastic emission or very low frequency acoustic emission in solids under compression | |
| Alessandro Schiavi, Giuseppe Lacidogna, Gianni Niccolini, Alberto Carpinteri |
| Electric fields emitted by fracture of glass or polyethylene fibers | |
| E.A. Devyatkin, I.V. Simonov, A.A. Sirotin, Yu.K. Bivin, Kirill Osipenko |
| Electromagnetic effects in loaded marble | |
| Alexander Zakupin, Virginia Mubassarova, Boris Borovsky, G.S. Kachesova |
| Enhancement of local approach models for assessment of cleavage fracture considering micro mechanical aspects | |
| Volker Hardenacke, Jörg Hohe, Valérie Friedmann, Dieter Siegele |
| Estimation of damage in porous material by cracks using its deformability to find their influence on its strength | |
| Rafael Salganik, Alexandr Fedotov |
| Evaluation of joint defects on FSW of Mg alloy using statistical method | |
| Takuya Kinoshita, K. Hayashi, Shigeru Hamada, I. Shigematsu, Hiroshi Noguchi |
| Evaluation of the Cumulative Fatigue Damage on the Spot Welded Joints using 590 MPa-class Steel under Random Loading Conditions | |
| Ryota Tanegashima, Hiroyuki Akebono, Masahiko Kato, Atsushi Sugeta |
| Evaluation of the fatigue strength of multiphase pump components under corrosive conditions using a short crack fracture mechanics approach | |
| Jochen Hoehbusch, Sebastian Bucher, Henning Haensel, Jan Scholten |
| Experimental and expected fatigue fracture plane according to variance and cumulative damage methods under multiaxial loading | |
| Zbigniew Marciniak, Dariusz Rozumek, Ewald Macha |
| Experimental and numerical assessment of thermal fatigue in 316 austenitic steels | |
| Elena Paffumi, Karl-Fredrik Nilsson |
| Experimental and numerical investigation of fracturing mechanism in concrete using deflagration agent | |
| Kazuma Moriya, Daisuke Fukuda, Katsuhiko Kaneko, Katsuya Sasaki, Ryo Sakamoto |
| Experimental and numerical investigation of steel fiber reinforced concrete fracture | |
| Sergejs Tarasovs, Edmunds Z?le, Vitauts Tamužs |
| Experimental and numerical study of Fracture mechanisms in UO2 nuclear fuel | |
| Jean-Marie Gatt, J. Sercombe, I. Aubrun, J-C. Ménard |
| Experimental Characterization of the Threshold- and Fatigue Crack Growth Behaviour Regarding Negative Stress Ratios | |
| Viktor Kloster, Hans Albert Richard, Gunter Kullmer |
| Experimental determination of the critical COD of rock-like materials using Digital Image Correlation | |
| Stavros Kourkoulis, Ermioni Pasiou |
| Experimental Evaluation of the Energy Responsible for the Crack Advancing | |
| Daniel Vavrik, Ivan Jandejsek |
| Experimental Fracture Assessment Diagram by Ultimate Crack Resistance | |
| Evgeny Morozov, M. Zakharov, A. Bulatova |
| Experimental observations to the spall of metal tubes under inward sliding detonation | |
| Xuemei Li, Lin Zhang, Yuying Yu, Yinghua Li |
| Experimental studies on fundamental mechanisms leading to fatigue crack initiation | |
| Jiri Man, Miroslav Valtr, Martin Petrenec, Jiri Dluhos, Karel Obrtlík, Jaroslav Polak |
| Experimental und numerical investigations of ductile failure behavior in the ferritic steel | |
| Pawel Kucharczyk, Sebastian Münstermann |
| Failure criteria for single crystal alloys of gas turbine blades under static and thermocycling loading | |
| Leonid Getsov, A. Semenov, E. Tikhomirova, A. Rybnikov |
| Failure Criteria for Wood Under Multiaxial Loading | |
| Antonio Martin-Meizoso |
| Failure precursors in rocks and concrete | |
| Gianni Niccolini, Oscar Borla, Giuseppe Lacidogna, Alessandro Schiavi, Alberto Carpinteri |
| Fatigue and cracking behaviour of austenitic CrNiMo and CrMnN steels in chloride containing environment at elevated temperature | |
| Clemens Vichytil, Gregor Mori, Reinhard Pippan, Michael Panzenböck, Rainer Fluch |
| Fatigue behavior of dissimilar and weathered riveted joints of hybrid fiber-metal laminate | |
| Jose Tarpani, Felipe Teixeira, Roberto Oliveira |
| Fatigue behavior of the titanium alloy Ti-6Al-4Mo in bifurcation area at 20 kHz | |
| Alexander Nikitin, Andrey Shanyavskiy, Thierry Palin-Luc, Claude Bathias |
| Fatigue Behaviour of Al2618-Al203 and AlA359-SiC Metal Matrix Composites | |
| Dimitrios Myriounis, S. Hasan |
| Fatigue crack growth behavior of patched and unpatched structures | |
| Mustapha Benachour, N. Benachour, M. Benguediab |
| Fatigue crack initiation due to local plasticity exhaustion during very high cycle fatigue | |
| Guocai Chai |
| Fatigue Crack Propagation in Drawn Filled NiTiNol Wires for Medical Applications | |
| Stepan Major, P. Vlach, P. Trudi? |
| Fatigue crack propagation in ferritic ductile irons: is K a useful parameter? | |
| Francesco Iacoviello, Vittorio Di Cocco, Mauro Cavallini |
| Fatigue Damage of Nitinol Stents in Simulated Physiological Solution | |
| P. Vlach, Stepan Major, M. Musil, L. Jakl |
| Fatigue damaging analysis of a glass/polyester composite with acoustic emission | |
| Mourad Benantar, M.A. Belouchrani, Z. Aboura |
| Fatigue fracture estimation of ductile structural steels | |
| Denys Rudavskyy, Valentin Skalsky, Roman Basarab |
| Fatigue Improvement of Welded Joints by Ultrasonic Impact Treatment (#149) | |
| Yuri Kudryavtsev |
| Finite Element Analysis on Burst Pressure of Defective Steel Pipes | |
| Norhaida Ab Razak, Nasrul Azuan Alang, Ahmad Syahrizan Sulaiman |
| Finite element modelling and damage evaluation of air plasma sprayed thermal barrier coatings | |
| Håkan Brodin, Robert Eriksson, Xin-Hai Li, Lars Östergren, Sten Johansson, Sören Sjöström |
| Force dipole asymptotic for a pore with a crack emanating from it in a compressed elastic material for diagnostics | |
| Anna Mischenko |
| Forming Limits of Metal Sheets and Tubes: Analysis Method and Experimental Validation | |
| Toshihiko Kuwabara, Kengo Yoshida |
| Fractal Lows for Spatial and Temporal Variables of Brittle Fragmentation | |
| Marina Davydova, Sergey Uvarov |
| Fractographic aspects of al-alloy-sicp metal matrix composite subjected to static, dynamic and cyclic mechanical loading | |
| Jose Tarpani, Omar Maluf, Jeferson Oliveira, Bruno Seraphim |
| Fracture and adhesion of super-nanomaterials: graphene (the strongest) and spider-silk (the toughest) | |
| Nicola Pugno |
| Fracture Detection by Electro-Ultrasonic Spectroscopy | |
| Pavel Tofel, Tomas Trcka |
| Fracture initiation at the contact under shear | |
| Robert Goldstein, Nikolaj Osipenko |
| Fracture kinetics of aluminum alloys sheets by taking into the account the pulsing load | |
| Mykola Chausov, Volodymyr Hutsaylyuk, Elena Zasymchuk, Andriy Pylypenko |
| Fracture mechanics model for predicting fracture strength of metallic alloys containing large second phase particles | |
| Uwe Zerbst, Mauro Madia |
| Fracture mechanics parameters of narrow notches by experimental local displacement measurements | |
| Sviatoslav Eleonsky, Yury Matvienko, Igor Odintsev, Vladimir Pisarev |
| Fracture mechanisms and structural integrity assessment of equipments for NPP with different types of reactors | |
| George Karzov, Boris Margolin |
| Fracture Mesomechanics of a solid as a hierarchically built nonlinear system | |
| Victor Panin |
| Fracture of adhesive layers in mode II | |
| Ulf Stigh, Anders Biel, Tomas Walander |
| Fracture of Ceramic Materials under Dynamic Loadings | |
| Evgeniya Skripnyak, Vladimir Skripnyak, V. Skripnyak, I.K. Vaganova |
| Fracture of constructional materials with HVOF covering at dynamic loads | |
| Pavel Radchenko, Andrey Radchenko, Ruslan Balokhonov |
| Fracture of corrosion protective layers: investigation by indentation test | |
| Gabriella Bolzon, Giovanna Gabetta, Aram Cornaggia |
| Fracture of light alloys with structured surface layers under dynamic loadings | |
| Vladimir Skripnyak, Evgeniya Skripnyak, N.V. Skripnyak, L.W. Meyer, N Herzig |
| Fracture of thin coatings based on multi-component oxides in friction contact | |
| Elena Torskaya, Alexey Morozov, Alexey Mezrin, Boris Sachek, Vyacheslav Sakharov, Nikolay Frolov |
| Fracture toughness criteria of small-sized samples with ultrafine grain structure | |
| Yevgeny Deryugin, Victor Panin |
| Fracture Toughness of Sharply Notched Specimens in the Ductile-to-Brittle Transition Regime of Ferritic Steel | |
| Hans-Jakob Schindler, Dietmar Kalkhof, Hans-Werner Viehrig |
| Gradient effects in fracture mechanics for nano-structured materials. | |
| Petr Belov, Sergey Lurie |
| Gradient theory of mechanics of solids: fields of defects and damage modeling. | |
| Sergey Lurie, Petr Belov |
| Harmonic testing of wells with a vertical fracture | |
| Petr Morozov |
| High-rate deformation and fracture under extreme conditions | |
| Vladimir E. Fortov, Gennady I. Kanel |
| Hydrogen diffusion in metals under fatigue failure | |
| Dmitry Indeitsev, Vladimir Polyanskiy, Boris Semenov, Mikhail Sterlin, Yury Yakovlev |
| Hydrogen embrittlement: the microscopic mechanism in fatigue and fracture | |
| Yukitaka Murakami |
| Hydrogen Gas Effects on the Fatigue Crack Growth Behavior of Cr-Mo Steel CT Specimen in Extremely Low Rate Range | |
| Koki Tazoe, Yasuji Oda, Hiroshi Noguchi |
| Hydrogen induced stress cracking in heterogeneous materials | |
| Guocai Chai, R. Lin Peng, Sten Johansson, U. Kivisäkk |
| Identification of Micro-scale Defects in Crystalline Solar Cell Structure | |
| Jiri Sicner, Pavel Koktavy |
| Impact and nonlinear analysis for highly loaded airframes | |
| Sergey Kravchenko, Kirill Zhidyaev, Sergo Dadunashvili |
| Impact Toughness and Fracture Mechanisms Nanostructured Materials with BCC, HCP and FCC Lattice Structure in a Wide Temperature Range | |
| Natal'ya Klevtsova, R.Z. Valiev, G.V. Klevtsov, I.P. Semenova, R.L. Islamgaliev, M.R. Kashapov |
| Improvement of fatigue performance by residual stresses: a fracture mechanics approach | |
| Jürgen Maierhofer, Reinhard Pippan, Hans-Peter Gänser |
| Increase of fatigue strength of 12Cr1MoV steel by surface nanostructuring with Zr+ ion beam | |
| Sergey Panin, Ilya Vlasov, Victor Sergeev, Alfred Sungatulin, Mark Kalashnikov, Victor Panin |
| Incubation time based fracture mechanics | |
| Yuri Petrov |
| Incubation Time Criterion in Problems of Spall Fracture | |
| Ivan Smirnov, Alexander Utkin |
| Influence of a functional gradation on crack propagation in real structures | |
| Hans Albert Richard, Britta Schramm |
| Influence of a magnetic field on corrosion deterioration | |
| Nukh Yakupov, Rishat Giniyatullin, Samat Yakupov |
| Influence of Al-Cr diffusion coating on low cycle fatigue behavior of cast nickel-base superalloy at 800 °C | |
| Karel Obrtlík, Simona Pospíšilová, Martin Juliš, Tomáš Podrábský, Tomáš Kruml |
| Influence of Corrosion Pits on the Fatigue Limit of 12% Cr Steam Turbine Blade Steel | |
| Bernd Schoenbauer, Stefanie Tschegg, Neville Rieger, Ronald Salzman, David Gandy |
| Influence of dynamic strain ageing on damage in austenitic stainless steels | |
| Mattias Calmunger, Guocai Chai, Sten Johansson, Johan Moverare |
| Influence of Graphite Morphology on the Fatigue Behaviour of Nodular Cast Iron | |
| Predrag Canzar, Zdenko Tonkovic, Ante Baki?, Janos Kodvanj |
| Influence of intermediate post-weld heat treatments on the fracture toughness of Cr-Mo-V steel welds | |
| Tomás Eduardo García Suárez, Cristina Rodríguez, Javier Belzunce |
| Influence of Loading Conditions on Dynamics of Crack Propagation in Polymethylmethacrylate | |
| Ivan Smirnov, Yuri Sudenkov |
| Influence of Overloads on the crack formation and propagation in EN AW 7475-T761 | |
| Jürgen Bär, Gero Wilhelm |
| Influence of pore structure on mechanical properties of ceramic materials. 3D simulation using movable cellular automata | |
| Alexey Smolin, Nikita Roman, Sergey Psakhie |
| Influence of sudden load changes on the fatigue crack propagation in cold drawn prestressing steel | |
| Jesus Toribio, B. González, J.C. Matos, F. Ayaso |
| Influence of the inlet die angle on the hydrogen embrittlement of cold drawn prestressing wires | |
| Jesus Toribio, M. Lorenzo, D. Vergara, V. Kharin |
| Infrared study of strain energy dissipation process in the fatigue crack tip | |
| Mikhail Bannikov, Alain Terekhina, Oleg Plekhov, Oleg Naimark |
| Intergranular microcracking due to anisotropic thermal expansion in calcite marbles | |
| Andrea Spagnoli, Anna Maria Ferrero, Maria Rita Migliazza |
| Intergrated Evaluation Method for Fatigue Limit of Notched Steel with DKth Value | |
| Takahiro Matsueda, Hiroshi Noguchi |
| Investigating failure in flax-polypropylene natural composites using discrete textile models and continuum damage mechanics approach | |
| Shyam Mohan Panamoottil, Raj Das, Krishnan Jayaraman |
| Investigation of Irradiation Creep of Steels and Alloys in Experiments with Gas-Pressurized Specimens in BOR-60 Reactor | |
| Victor Neustroev, S.V. Belozerov, Ye.I. Makarov |
| Investigation of Mixed Mode Fracture in Marble by Using Two Different Test Configurations | |
| Majid R. Ayatollahi, J. Akbardoost |
| Investigation of peculiarities fracture and dilatancy processes during constrained shear deformation of block-structured geological media | |
| Sergey Astafurov, Evgeny Shilko, Sergey Psakhie |
| Investigation of the conditions of strong compact fracture | |
| Andrey Buzyurkin, Evgeny Kraus, Yaroslav Lukyanov |
| Investigation of the in-depth growth of micro cracks in ferritic-martensitic dual-phase steel | |
| Pascal Pitz, Lisa Zellmer, Angelika Brueckner-Foit |
| J-Resistance curve of X60 steel using SE(T) specimens by elastic compliance and potential drop methods | |
| André Carvalho, Juliana Martins, Roberto Piovatto, Waldek Bose Filho |
| Kinetic Equations of “Diffusion” Cracks and Delaminations in Adhesive Joints | |
| Il'ya Nickolaevich Dashevskiy |
| Loading influence on the local strain fields of an interface crack in a DCB sandwich composite | |
| Matei-Constantin Miron, Dan Mihai Constantinescu, Zoltan Major, Catalin Picu |
| Low and high neutron energy for damage detection by chemical composition analysis and residual stress measurements | |
| Alba Zanini, Oscar Borla |
| Maintenance of safety of water-cooling tower constructions | |
| Samat Yakupov, Nukh Yakupov, Rinnat Nurullin, Akhmet Nurgaliev |
| Materials and Environmental Circumstance: And All is Always Now | |
| Jesus Toribio |
| Mechanical behaviour and fracture analysis of the T91 martensitic steel in liquid sodium environment | |
| Ouadie Hamdane, Jean-Bernard Vogt, Ingrid Proriol Serre |
| Mechanical comparison of two types of fixation for Ludloff Oblique First Metatarsal Osteotomy under cyclic loading | |
| Athanasios Mitousoudis, Panagiotis Chatzistergos, Emmanouil Stamatis, Stavros Kourkoulis |
| Mechanics of Small Cracks in Estimation of Endurance Limits | |
| Gregory Khazhinsky |
| Mechanisms of deformation and fracture in coated materials. Multiscale numerical simulation | |
| Ruslan Balokhonov, Varvara Romanova, Siegfried Schmauder, Eugen Schwab |
| Mechanisms of Degradation and Brittle Fracture of Reactor Pressure Vessel Steels Under Longterm Operation | |
| Ya. I. Shtrombach, Boris Gurovich, Evgenia Kuleshova, D.A. Maltsev, S.V. Fedotova, A.S. Frolov |
| Mesomechanics of fatigue crack propagation as a non-linear wave process | |
| Victor Panin, Dmitry Moiseenko, Tamara Elsukova, Yulia Popkova |
| Micro heterogeneous fatigue behavior of duplex stainless steel during cyclic loading | |
| Guocai Chai, R. Lillbacka, R. Lin Peng |
| Micro-cantilever Testing to Evaluate the Mechanical Properties of Thermal Barrier Coatings | |
| Dong Liu, James Brown, Peter Flewitt |
| Micromechanically motivated damage model for brittle materials under thermal shock | |
| Dimitri Henneberg, Andreas Ricoeur |
| Microstructural influence on fatigue crack growth | |
| Michael Marx, Wolfgang Schaef, Tao Qian |
| Migration of pores as a mechanism of systems of high porosity bands formation in the unconsolidated sedimentary rocks | |
| Shamil Mukhamediev, D.A. Ul’kin |
| Mixed mode crack growth conditions – critical plane approaches | |
| Krzysztof Mróz, Z. Mróz, K. Doli?ski |
| Model of Symmetric Crack Formation in a Plate and a Wedge under Bending by a Point Indenter | |
| Il'ya Nickolaevich Dashevskiy |
| Modeling of heat transfer in a non-homogeneous material with a crack. The study of singularity at the vicinity of the crack tips | |
| Andrey Glushko, Alexander Ryabenko |
| Modelling of Penny-Shaped Crack growth in Axisymmetric FGM with Residual Stresses | |
| Alexander Galybin, Leonid Krenev, Sergey Aizikovich |
| Modelling of wear and contact fatigue in friction interaction | |
| Irina Goryacheva, Elena Torskaya |
| Modelling the dynamic response of fibre metal laminates subjected to blast loading | |
| Constantinos Soutis, Galal Mohamed |
| Modelling the Effect of Orientation on the Shock Response of a Damageable Composite Material | |
| Alexander Lukyanov |
| Molecular dynamics investigation of behavior of grain boundaries under thermo-mechanical external impact. | |
| Anton Nikonov, Andrey Dmitriev, Sergey Psakhie |
| Molecular dynamics simulation of nanocluster deposition on the metal substrate | |
| Andrey Utkin, Igor Golovnev, Vasily Fomin |
| Molecular dynamics simulation of thin films deformation | |
| Alexey Bolesta, Vasily Fomin |
| Molecular Mechanics Simulation of Buckling of Single-Walled Carbon Nanotubes | |
| Sergey Korobeynikov, Vladimir Alyokhin, Alexey Babichev |
| Multilevel approach to description of deformation and fracture of brittle media with hierarchical porous structure on the basis of movable cellular automaton method | |
| Igor Konovalenko, Alexey Smolin, Sergey Psakhie |
| Multiscale Experiments on Ductile Failure in Polycrystalline Materials | |
| Krishnaswamy Ravi-Chandar, Ali Ghahremaninezhad |
| Nano-coating as a method to improve mechanic characteristics of materials | |
| Boris Semukhin, Igor Goncharenko |
| New ideas for the development of damage resistant materials and structures | |
| Otmar Kolednik |
| New insight into the fatigue-atmospheric corrosion process of A1N steel for railway axles | |
| Stefano Beretta, Antonietta Lo Conte |
| New micromechanism of fracture in polymeric composites materials | |
| E. Kablov, V. Litvinov, Ivan Deev, Petr Belov, L. Kobetz |
| Non-destructive Characterization of Micro-sized Defects in the Solar Cell Structure | |
| Nadezda Bogatyreva, Robert Macku |
| Nonlinear eigenvalue problems arising from nonlinear fracture mechanics analysis | |
| Ekaterina Adylina, Larisa Stepanova |
| Nontouch experimental method for recording and measuring of fracture under high temperature | |
| Aleksandr Lokoshchenko, Walentin Teraud |
| Notch Fracture Mechanics Approaches in an Analysis of Notch-like Defects | |
| Yury Matvienko |
| Numerical method for solving crack problems posed in terms of principal directions | |
| Alexander Galybin |
| Numerical Prediction of Crack Path in Pre-Cracked Rocks under Uniaxial Compression | |
| Mohammad Fatehi Marji, Amin Manouchehrian, Mohsen Mohebbi |
| Numerical simulation of plasticity and failure of solids with defects under dynamic loading | |
| Yuriy Bayandin, Nataliya Savelyeva, Oleg Naimark |
| Numerical Simulation of the Mesoscale Fatigue Crack Propagation in WC/Co under Plane Stress Conditions | |
| Utku Ahmet Özden, Alexander Bezold, Christoph Broeckmann |
| Numerical study of influence of adsorbed gas filtration and diffusion on dynamic phenomena in a coal seam | |
| Andrey Dimaki, Andrey Dmitriev, Simon Zavsek, Sergey Psakhie |
| Numerical study of lignite samples fracture under complex loading conditions | |
| Andrey Dmitriev, Evgeny Shilko, Simon Zavsek, Sergey Psakhie |
| Observation and quantification of three-dimensional crack propagation in poly-granular graphite | |
| James Marrow, Mahmoud Mostafavi, Samual McDonald, Paul Mummery |
| On applicability of Hall-Petch law in metals | |
| Olga Ignatova, Andru Malyshev, D. Petrova, V. Raevsky, M. Tkachenko |
| On fracture toughness of polyurethane foams | |
| Liviu Marsavina, Emanoil Linul, Tomasz Sadowski, Dan Mihai Constantinescu, Marcin Knec, Dragos-Alexandru Apostol |
| On influence of substrate compliance on delamination and buckling of coatings | |
| Konstantin Ustinov |
| On modelling of fluid-driven fracture branching in jointed rocks | |
| Alexander Galybin, Shamil Mukhamediev |
| On multi-axial fatigue models for notched specimens | |
| Jie Fang, Huang Yuan |
| On the characteristic lengths used in notch fracture mechanics | |
| Guy Pluvinage, J. Capelle, Z. Azari |
| On the estimation of fatigue crack growth in a contaminated H2S environment by interrupted cyclic tests | |
| Paolo Bortot, Stefano Beretta |
| On the failure of anisotropic materials: physical or mathematical? | |
| Nikos Andrianopoulos, Ioannis Dernikas |
| On the modelling of slant fracture in metal sheet structures | |
| Ingo Scheider, Jörn Mosler, Norbert Huber |
| On the Strengthening of Structural Concrete Beams with Polymeric Fibers | |
| Itamar Freitas, Katia Allende, Fathi Darwish, Marcos Pereira |
| Optimization of Energy Input in the Fracture Process of Rocks | |
| Grigory Volkov, Evgeny Dolmatov, Yuri Petrov |
| Phase transformations and spall fractures of high-purity cerium under explosive loading | |
| Evgeny Kozlov, V. Tarzhanov, I. Telichko, D.G. Pankratov, G. Gray, M. Zocher |
| Phase-Field Modelling of Stress Corrosion | |
| Per Stahle, Eskil Hansen |
| Physical and mechanical modeling of fracture and prediction of fracture strain and fracture toughness for irradiated austenitic steels | |
| Boris Margolin, Alexander Sorokin |
| Piezonuclear evidences from laboratory tests on steel | |
| Stefano Invernizzi, Oscar Borla, Giuseppe Lacidogna, Amedeo Manuello Bertetto, Alberto Carpinteri |
| Piezonuclear Reactions during Mechanical Tests of Basalt and Magnetite | |
| Amedeo Manuello Bertetto, Riccardo Sandrone, S. Guastella, Oscar Borla, Giuseppe Lacidogna, Alberto Carpinteri |
| Piezonuclear reactions produced by brittle fracture: From laboratory to planetary scale | |
| Alberto Carpinteri, Oscar Borla, Giuseppe Lacidogna, Amedeo Manuello Bertetto |
| Piezonuclear Reactions: Neutrons and Transmutations by Ultrasonic Stress of Iron Bars | |
| Fabio Cardone, Roberto Mignani, Andrea Petrucci |
| Plastic Collapse of a Thin Annular Disk of Variable Thickness Subject to Thermo-Mechanical Loading | |
| Elena Lyamina, Sergei Alexandrov, Yeau-Ren Jeng |
| Potential drop technique for bifurcated fatigue crack growth, limitations and comparison with optical methods. | |
| Robin Degeilh, Vincent Bonnand, Didier Pacou |
| Prediction of corrosion in reinforced concrete structures | |
| Rachid Mehaddene, Mohamed Kadri |
| Prediction of the neutron irradiation effect on the creep-rupture properties on the basis of physical-and-mechanical modeling of fracture process | |
| Boris Margolin, Alexander Gulenko, Andrey Buchatsky |
| Probability Models for Lifetime and Integrity Assessment of Equipment and Components of WWER type NPP | |
| Galya Dimova |
| Procedure of accelerated irradiation results usage for prediction of the material state corresponding to long-term operation of the reactor pressure vessel | |
| Dmitry Erak, Boris Gurovich, Evgenia Kuleshova, Ya. Shtrombakh, O. Zabusov, Denis Zhurko |
| Properties degradation of pipeline steels caused by long-term service in hydrogen enriched environments | |
| Volodymyr Panasyuk, Hryhoriy Nykyforchyn |
| Quasi-Brittle Fracture Diagrams under Low-Cycle Fatigue (Double-Frequency and Unsteady Loadings) | |
| Vladimir Kornev |
| Reactor pressure Vessel Steel Embrittlement Under the combined Action of Neutron Field and Hydrogen | |
| Evgeny Krasikov, A.D. Amajev |
| Real and Virtual Fracture Tests on Welding Lines of Injection Molded Short Fiber Reinforced Polymers | |
| Zoltan Major, M. Miron, M. Reiter, T. Adachi |
| Regularities of fatigue fracture of metal materials | |
| Aleksander Romanov |
| Relation between fatigue crack initiation and structure in pearlitic steel | |
| Tomoya Fujisawa, D. Sasaki, Shigeru Hamada, Hiroshi Noguchi |
| Relation between structural disorder and fracture mechanisms in an alkali borosilicate glass : a molecular dynamics study | |
| Le-Hai Kieu, Jean-marc Delaye, Richard Caraballo, Mikael Gennisson, claude Stolz |
| Reliability and Robustness of Wheelchairs under Impact Loading | |
| A. Mimaroglu, I. K. Yilmazcoban, H. Unal, M. Elmas |
| Residual life prediction of power steam turbine disk with fixed operating time | |
| Boris Ilchenko, Rustam Yarullin, Alexander Zakharov, Ruslan Gizzatullin |
| Residual Stresses Induced by Shot-Peening and Fatigue Durability of Leaf Springs | |
| Bruno Scuracchio, Nelson Lima, Cláudio Schön |
| Scale Levels for Durability Bimodal Distribution of Titanium Alloys: Fatigue Mechanisms and In-service Experience | |
| Andrey Shanyavskiy |
| Scaling in the Mechanoluminescence of Shocked Quarz Rods | |
| Sergey Uvarov, Marina Davydova |
| Semi-analytical investigations of R-curve behavior in ferroelectric materials considering different scales | |
| Roman Gellmann, Andreas Ricoeur |
| Sensitivity analysis of the staircase method to determine the fatigue limit | |
| Maria Carmen Blanco del Prado, Antonio Martin-Meizoso |
| Shakedown of thin disks subject to thermo-mechanical loading | |
| Chinh Pham, Sergei Alexandrov |
| Simulation of crack propagation using hybrid Trefftz method based on a strip-yield crack-tip plasticity model for automotive crash applications | |
| Karlheinz Kunter, Thomas Heubrandtner, Reinhard Pippan |
| Simulation of mechanical loading by cylindrical indenter of “ceramic coating — polycrystalline metallic substrate” composition | |
| Dmitry Moiseenko, Sergey Panin, Pavel Maksimov, Elena Iriskina, Irina Goryacheva |
| Simulation of the shock-induced phase transition and spall of cerium | |
| Lin Zhang, Xuemei Li, Yinghua Li, Yuying Yu |
| Small fatigue crack growth in the ODS Eurofer steel | |
| Ivo Kubena, Tomáš Kruml |
| Sn and Ti influences on intermetallic phases damage in hot dip galvanizing | |
| Vittorio Di Cocco, Francesco Iacoviello |
| Solar cell structure defects and cracks | |
| Pavel Škarvada, Pavel Tomnek, Dinara Dallaeva |
| Solution of Fracture Mechanics Problems by the Optical Method of Caustics. - New Developments | |
| Emmanuel Gdoutos |
| Sound Velocities and Shear Strength of Shocked U within 10-250 GPa | |
| Evgeny Kozlov, D.G. Pankratov, O.V. Tkachyov, A.K. Yakunin |
| Space distribution of damage at early stage of spall fracture in copper | |
| I.N. Kondrokhina, Olga Ignatova, A.M. Podurets, Andru Malyshev |
| Strength analysis of structures made of high-filled polymer materials: constitutive equations, methods of boundary value problems solving, account for strain concentration | |
| Dmitriy Bykov, Dmitriy Konovalov, Vladimir Peleshko |
| Strength and Fracture Properties of Structural Graphites | |
| Evgeny Lomakin |
| Strength factors for glass foam | |
| Olga Kazmina, Boris Semukhin, A.V. Mukhortova |
| Stress analysis around a through crack in a thin copper film using molecular dynamics | |
| Dan Johansson, Per Hansson, S. Melin |
| Stress-assist chemical reactions front propagation in deformable solids | |
| Alexander Freidin, Elena Vilchevskaya |
| Structural Integrity Assessment of Thick Wall Pipes under Biaxial Loading | |
| Diya zohdi ratib Arafah, Mauro Madia, Stefano Beretta, Mihaela Cristea |
| Structural materials sciences in problems of life time and safety of technical systems | |
| Vladimir Moskvichev |
| Structural-Continual Approach in Fracture Mechanics | |
| Arseny Kashtanov |
| Structures of fracture near a longitudinal shear main crack | |
| Robert Goldstein, Nikolaj Osipenko |
| Study of temperature evolution caused by mesodefect kinetics in metals under fatigue loading | |
| Oleg Plekhov, Oleg Naimark |
| Study of the Dependence of Effective Compliances of a Plane with an Array of Circular Holes on Array Parameters | |
| Vyacheslav Mokryakov |
| Surface Crack Growth Under Three Point Bend And Tension Conditions | |
| Valery Shlyannikov, Andrey Tumanov |
| Synergetic Discretely-Likelihood Fatigue Model Based Structure Lifetime Prediction Methods Improvement | |
| Andrey Radchenko, Sviatoslav Yutskevych, V. Panteleev |
| System MAE-1L for Magnetoacoustic Emission Diagnostics of Structural Materials | |
| Yevhen Pochapskyy, Sviatoslav Hirnyj, Bohdan Klym, Valentin Skalsky, Sergey Builo |
| Temperature Dependence of Fracture Behavior of Rubbers for Rapid Gas Decompression | |
| Bernd Schrittesser, G. Pinter, Zoltan Major |
| Tensile and fatigue crack growth properties of high strength stainless steel with high resistance to hydrogen embrittlement in 100 MPa hydrogen gas | |
| Akihiro Orita, Takashi Matsuo, Saburo Matsuoka, Yukitaka Murakami |
| Tensile-shear fatigue analysis and comparison of light alloy thin sheet lap-joints obtained by ultrasonic spot welding and ultrasonic spot welding plus adhesive bonding | |
| Michele Carboni |
| The Block Element Method for a Block Structure | |
| Vladimir Babeshko, O.V. Evdokimova, O.M. Babeshko |
| The Calculation in whole Process Rate Realized with Two of Type Variable under symmetrical cycle for Elastic-Plastic Materials Behavior | |
| Yangui Yu, Yanghui Ma |
| The damage mechanics approach and the damage evolution of bone considering the mechanical-electric-magnetic coupling effects | |
| Shouwen Yu, Chuanyoung Qu, Xieqiao Feng |
| The Effect of Electrolytically Absorbed Hydrogen on Young's Modulus of Structural Steel | |
| Sviatoslav Hirnyj, Valentin Skalsky |
| The Effect of Ferrite Embrittlement in Duplex Steel on Fatigue Crack Propagation from the Low (LCF) to the Very High Cycle Fatigue (VHCF) Regime | |
| Maria Cecilia Marinelli, Alexander Giertler, Jitendra Sahu, Iris Alvarez, Ulrich Krupp |
| The effect of grain size on crack propagation in a ferritic steel | |
| Sunthar Mahalingam, Peter Flewitt |
| The effect of mechanical heterogeneity on finite element numerical evaluation of J-integral for cracked weld joints | |
| Egor Moskvichev |
| The effect of multiple isothermal forging on the structure and mechanical properties of low carbon steel 12GBA and on the fracture process and its characteristics | |
| Antonina Gordienko, Lyudmila Derevyagina, Alexander Korznikov, Lyudmila Zatochnaya, Ilfat Safarov |
| The Effect of Prestrain on Fatigue Property of Precipitation Strengthening Stainless Steel SUH660 | |
| Hao Wu, Shigeru Hamada, Hiroshi Noguchi |
| The effect of roll-forming onto fatigue life of railway axles | |
| Daniele Regazzi, Stefano Beretta, Michele Carboni |
| The effect on the mode I stress intensity factor of plastic dissipation in heat at the crack tip under cyclic loading. | |
| Nicolas Ranc, Thierry Palin-Luc, Paul C. Paris, Nicolas Saintier |
| The Effects of Notch Radius on the Master Failure Curve of the SENB Specimens | |
| Hadj Meliani Mohammed, Z. Azari, Guy Pluvinage, Yury Matvienko |
| The experimental and numerical study of elastic-plastic deformation processes, limit states and failure of the structure elements of under the monotonic static and dynamic loading | |
| Valentin Bazhenov, Alexander Kibets, Sergey Osetrov, Elena Pavlyonkova, Anastasiya Artemyeva |
| The flux effect on radiation embrittlement of WWER RPV materials | |
| Elena Yurchenko, Boris Margolin, A.M. Morozov, N.E. Pirogova |
| The Influence of Substrate Material on the Thermal Cycling Fatigue Life of Thermal Barrier Coating Systems | |
| Robert Eriksson, Håkan Brodin, Sten Johansson, Lars Östergren, Xin-Hai Li |
| The interrelation between statistical distributions of impact toughness and fracture mechanisms | |
| Luidmila Botvina, Yulia Demina, Marat Tyutin, Alexander Arsenkin |
| The interrelation of local and energy criteria of unstable brittle fracture for low-alloyed cold resistant steels | |
| Alexey Ilyin, Vladimir Filin |
| The Mechanics of Materials in Contact Problems | |
| Georges Cailletaud |
| The mesomechanics of fracture in ultrafine grain titanium and Armco-iron samples | |
| Victor Panin, Lyudmila Derevyagina, Antonina Gordienko |
| The modelling of splitting destruction of barriers from anisotropic materials in 3D | |
| Marina Krivosheina, Maria Kozlova, Helen Tuch, Sergey Kobenko |
| The phenomenon of neutron emission from earthquakes | |
| Oscar Borla, Giuseppe Lacidogna, Alba Zanini, Alberto Carpinteri |
| The Philosophy of Constraint Correction by the Global Approach | |
| Hadj Meliani Mohammed, Z. Azari, Guy Pluvinage, Yury Matvienko, Taoufik Boukharouba |
| The Problem Of Crack Growth Simulation Under Random Loading | |
| Valery Nikonov, Vasily Shapkin |
| The Spall Strength and Hugoniot Elastic Limit of Tantalum with Various Grain Size. | |
| Sergey Razorenov, Gennady Garkushin, Gennady I. Kanel, Olga Ignatova |
| The standardized Brazilian disc test as a contact problem: Quantifying the friction at the disc-jaw interface | |
| Stavros Kourkoulis, Christos Markides, John Hemsley |
| The stress intensity factor Green’s function for a crack interacting with a dislocation | |
| S. Teyar, Mohamed Chabaat |
| The use of cyclic delta jro as a parameter for fatigue initiation of X52 steel | |
| J. Capelle, Jozef Predan, Nenad Gubeljak, Guy Pluvinage |
| Thermal fracture of a bimaterial with an arbitrary finite number of partially insulated cracks and a heat source | |
| Mikayel Ordyan, Vera Petrova |
| Three-dimensional modeling of plasticity-induced crack closure in a 304L stainless steel: influence of crack length and crack shape | |
| Catherine Gardin, Kokleang Vor, Mandana Arzaghi, Christine Sarrazin-Baudoux, Jean Petit |
| Time correlation between different forms of energy emitted from rocks under compression | |
| Giuseppe Lacidogna, Oscar Borla, Gianni Niccolini, Alberto Carpinteri |
| Toughness evaluation of high strength steels sheets by means of the essential work of fracture | |
| D. Gutiérrez, Ll. Pérez, A. Lara, Daniel Casellas, J.M. Prado |
| Ultrasonic Measurement of Residual Stresses in Welded Elements and Structures | |
| Yuri Kudryavtsev, Jacob Kleiman |
| Uncertainties in T0 and Corresponding Safety Margins in Lower Bounds of K1c in the Ductile-to-Brittle Transition Regime of Ferritic Steels | |
| Dietmar Kalkhof, Hans-Jakob Schindler |
| Use of Cohesive Elements for the Simulation of Crack Extension | |
| Wolfgang Brocks |
| Use of Electromagnetic and Acoustic Emission in Failure Monitoring of Cementitious Composites | |
| Tomas Trcka, Bohumil Koktavy |
| Use of Non-Axisymmetric Specimens in Upsetting for Determining the Workability Diagram | |
| Dragisa Vilotic, Sergei Alexandrov, Miroslav Plancak, Aljosa Ivanisevic |
| Useful Lifetime Evaluation and Prediction for Automotive Rubber Mount | |
| Chang Su Woo, Hyunsung Park, Kyung Sik Kim, Ju Ho Choi |
| Wrinkling-induced fracture of biological membranes under stress | |
| Lev Panin, Alexey Panin, Pavel Mokrushnikov, Anna Khokhlova |
| XRDD Observation of the Silicate Composite During Loading Experiment | |
| Daniel Vavrik, Tomáš Fíla, Ivan Jandejsek, Václav Veselý, Petr Frantík, Zbyn?k Keršner |