General Papers
| A Crack Growth Modelling in Materials with Heterogeneous Microstructure | |
| Vladislav Kozák, Ivo Dlouhý |
| A Mechanistic Understanding of Stress Corrosion Cracking of Mg-Al Alloys | |
| Nicholas A. Winzer, A. Atrens, Wolfgang Dietzel, V. S. Raja, G. Song, K. U. Kainer |
| A Mode I Fracture Behaviour Analysis of Adhesively Bonded Joints | |
| Vincent Cooper, Alojz Ivankovic, Aleksandar Karac |
| About the Dependence between Exponent and Constant in the Paris Law for Fatigue Crack Growth Rate | |
| Jan Kohout |
| Analysis of Multiple Cracks in Thin Coating on Orthotropic Substrate | |
| Michal Kotoul, Tomáš Profant, Old?ich Ševe?ek |
| Assessment of Sub-Clad Flaw based on Finite Element Analyses | |
| Szabolcs Szávai, Róbert Beleznai, Tibor Köves |
| Automatic Diagnostic System for Fatigue Damage with Statistical F test | |
| Masataka Yatomi, Atushi Iwasaki, Tadashi Kimura |
| Characterisation of Reactor Vessel Steels in the Brittle-Ductile Transition Region | |
| Thomas Linse, Meinhard Kuna |
| Characteristics of Internal Fatigue Fracture of Shot-Peened Spring Steels | |
| Maya Sugimoto, Kenji Kanazawa |
| Characterization of Mechanical Properties and Residual Stresses for Ni-Co Thin Films | |
| Joong-Hyuk Ahn, Hong-Ryul Bae, Yun-Jae Kim, Jun-Hyub Park |
| Computer Aided Optical Method For Aircraft's Components Fatigue Life Estimation | |
| Sergey Ignatovich, Michail Karuskevich, Tatijana Maslak |
| Cone Crack Development during Ball on the Three Balls Test | |
| Zden?k Chlup, Walter Harrer, Vladislav Kozák, Lukáš ?eho?ek |
| Crack Opening and Crack Flank Displacements in the Prefracture Zone when Branching and Kinking | |
| Vladimir Kurguzov, Vladimir Kornev |
| Creep Fracture Mechanisms in Selected Discontinuously Reinforced Magnesium Metal Matrix Composites | |
| Václav Skleni?ka, Kv?ta Kucha?ová, Milan Svoboda |
| Damage Analysis of Fibre-matrix System | |
| Jan Klusák, Zden?k Knésl |
| Determination of Low-Cycle Fatigue Parameters with Rotating Bending Test | |
| Marko Knez, Sre?ko Glodež, Janez Kramberger |
| Effect of Intercritical Annealing on Fracture Behaviour of 10GN2MFA Grade Steel | |
| Ladislav Kander, Karel Matocha, Aleš Kor?ák |
| Effect of Irradiation on Mechanical Properties of 15Ch2MFA Reactor Pressure Vessel Steel | |
| Št?pán Válek, Petr Haušild, Miloš Kytka |
| Effect of Notch Shape and Absorbed Hydrogen on the Fatigue Fracture below Fatigue Limit | |
| Yoshiyuki Kondo, Hikaru Eda, Masanobu Kubota |
| Effect of Particles Size and Density on Fracture Toughness of Polypropylene Particulate Composite | |
| Eva Nezbedová, Zden?k Knésl, Pavel Huta?, Zden?k Majer, Petr Veselý |
| Effect of Specimen Thickness on Plastic Zone | |
| Shashidhar Kudari, Krishnaraja Kodancha |
| Elastic-Plastic Analysis of Cracks on Metal/Ceramic Joints | |
| Mohamed Belhouari, Bel Abbes Bachir Bouiadjra, Kacem Kaddouri, Kouider Madani |
| Enhancing Stress Corrosion Cracking Resistance in Al-Zn-Mg-Cu Alloy through Inhibiting Recrystallization | |
| M. Bobby Kannan, V. S. Raja |
| Evaluation of Mechanical Properties of Composite Ni Base Coatings using Small Punch Test Method | |
| Ladislav Kander, David Mikuláš, František Kristofory |
| Evaluation of Toughness Anisotropy on Doped PZT Ceramics as a Function of Load and Temperature | |
| Raúl Bermejo, Hannes Grünbichler, Josef Kreith, Robert Danzer |
| Experimental Study of Mechanically Stressed Composite Materials | |
| Pavel Koktavý, Bohumil Koktavý |
| Fabrication of Vertically Aligned Arrays of Metal Nanorods and Nanotubes by Template-Based Electrodeposition Method | |
| Marina Vorozhtsova, Kate?ina Klosová, Jaromír Hubálek |
| Fatigue Behavior and Fracture Mechanism of Al Alloy 7075-T6 under Ultrasonic Cycling Deformation | |
| Qiang Chen, Norio Kawagoishi, Gen Hashiguchi, M. Oki, Kazuhiro Kusukawa |
| Fatigue Behavior of Nodular Cast Iron after Gas Nitriding | |
| Radomila Kone?ná, Gianni Nicoletto, Viera Konstantová, Peter Jan?ovi? |
| Fatigue Fracture and Damage of Engineering Polymers | |
| Keisuke Ishikawa, Yasuo Kobayashi |
| Fatigue Life Analysis of Damaged Structural Component using Strain Energy Density Method | |
| Stevan Maksimovic, Slobodanka Boljanovic, Vladimir Orovic, Milorad Komnenovic |
| Fatigue Life Assessment of Structural Component with a Non-uniform Stress Distribution Based on a Probabilistic Approach | |
| Aleksander Karolczuk, Thierry Palin-Luc |
| Fatigue Strength Reduction of Notched Component in Hydrogen Gas after Multiple Overloading | |
| Masanobu Kubota, Junichiro Yamaguchi, Yoshiyuki Kondo |
| Fatique Properties of AISI 316 Grade Steel after ECAP Technology | |
| Ladislav Kander, Miroslav Gréger |
| Fractographical Analysis of Fish-eye Formation under Multiaxial Fatigue | |
| Št?pán Major, Karel Sláme?ka, Marta Kianicová, Jaroslav Pokluda |
| Fracture Mechanical Investigations of Polymeric Nanocomposites | |
| Andrea Monami, Katrin Reincke, Wolfgang Grellmann, Bernd Kretzschmar |
| Fracture Process Zone Size and Energy Dissipated during Crack Propagation in Quasi-brittle Materials | |
| Ladislav ?outil, Václav Veselý, Zbyn?k Keršner, Stanislav Seitl, Zden?k Knésl |
| Fracture Toughness and Fracture Surface Morphology of Cold Forging Die Steels | |
| Ryuichiro Ebara, Keisuke Takeda, Yasuo Ishibashi, Atsushi Ogura, Yasuyuki Kondo, Shinichi Hamaya |
| Growth of Short Fatigue Cracks Emanating from Notches in a Two-phase Austenitic-Ferritic Stainless Steel | |
| Ond?ej Kotecký, Suzanne Degallaix, Jaroslav Polák |
| High Cycle Fatigue of IN 713 LC | |
| Ludvík Kunz, Petr Lukáš, Rastislav Mintách, Radomila Kone?ná |
| High Cycle Fatigue Property and Micro Crack Behaviors in Non-combustible Magnesium Alloy | |
| Yasuo Ochi, Kiyotaka Masaki, Toshifumi Kakiuchi, Takashi Matsumura, Yoshinobu Takigawa, Kenji Higashi |
| Hydrogen Induced Cracking in Duplex 00H18N5M3S Stainless Steel | |
| Krystyna Lubli?ska, Andrzej Szummer, Krzysztof Jan Kurzyd?owski |
| Influence of Pre-FPP (Fine Particle Peening) on Fatigue Fracture Mechanism of Nitrided AISI 4135 Steel | |
| Shoichi Kikuchi, Keita Ishii, Jun Komotori |
| Influence of the Geometry on the Essential Work of Fracture of Polypropylene Materials | |
| Ralf Lach, Thomas Koch, Sabine Seidler |
| Investigation of Elastic and Strength Properties of Nanoobjects | |
| Olga Loboda, Galina Krohaleva |
| Kinetic Description of Dynamic Crack Propagation | |
| Arseny Kashtanov, Yuri Petrov, Leonid Isakov |
| Mechanical Properties of the Cell Wall Material of Closed-cell Al Foam | |
| Insu Jeon, Kiyotaka Katou, Tsutomu Sonoda, Tadashi Asahina |
| Mechanical Strength of Nano-Elements | |
| Takayuki Kitamura, Hiroyuki Hirakata, Takashi Sumigawa, Takahiro Shimada |
| Microscopic Deformation Behavior of Lamellar Pearlite Steel | |
| Yuu Sakoda, Suguru Kashiwagi, Shigeru Hamada, Hiroshi Noguchi |
| Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel | |
| Jaroslav Pokluda, Yoshiyuki Kondo, Karel Sláme?ka, Vladislav Kozák, Jana Horníková, Pavel Šandera |
| Mode Mixity and Constraint Parameters Accounting for Crack Tip Curvature | |
| Valery Shlyannikov, Svetlana Kislova |
| Modeling an Interaction between a Phase Transforming Inclusion and a Crack | |
| Alexander Freidin, Igor Korolev, Elena Vilchevskaya |
| Nanoscopic Multimode Fracture Mechanisms in Anisotropic Silicon | |
| Victor Kozhushko, Peter Hess |
| Numerical Optimization of Properties of Solidifying Ceramic Material EUCOR | |
| František Kavi?ka, Karel Stránský, Josef Št?tina, Jana Dobrovská, Bohumil Sekanina |
| On the Development of Key Curve Methods for the Determination of Dynamic Crack Resistance Curves of Ductile Cast Iron (DCI) | |
| Wolfram Baer, Dieter Bösel, Arno Eberle, Dietmar Klingbeil |
| On the Role of Microcrack Initiation during Fatigue of a Duplex Steel in the Very-High-Cycle-Fatigue (VHCF) Regime | |
| Ulrich Krupp, Helge Knobbe, Hans-Jürgen Christ, Philipp Köster, Claus-Peter Fritzen |
| Percolation of Intergranular Fracture Dependent on Grain Boundary Microstructures during Superplastic Deformation in Al-Li-Cu-Mg-Zr Alloy | |
| Shigeaki Kobayashi, Sadahiro Tsurekawa, Tadao Watanabe |
| Performance Comparison of Railway Wheel in Terms of Fracture Mechanics and Flat Generation | |
| Seok Jin Kwon, Dong Hyung Lee, Jung Won Seo, Won Hee You |
| Periodic Set of the Interface Cracks with Contact Zones in an Anisotropic Bimaterial | |
| Sergei Kozinov, Volodymyr Loboda |
| Plastic Limit Loads for Idealized Branch Junctions under Combined Pressure and Bending | |
| Kuk-Hee Lee, Kang-Mook Ryu, Yun-Jae Kim, Kee Bong Yoon |
| Plastic Limit Pressures of Circumferential Cracked Pipe Bends | |
| Seok-Pyo Hong, Jong-Hyun Kim, Yun-Jae Kim |
| Plasticity, a Major Agent in Triggering a Brittle Fracture Mode | |
| Yosef Katz |
| Problems of Crystallization of B2-FeAl Based Alloys | |
| Jaromír Kope?ek, Karel Jurek, Vladimír Šíma, Pavel Lej?ek |
| Relationship between J-integral and CTOD for a C(T) Specimen: a 3D FE Analysis | |
| Krishnaraja Kodancha, Shashidhar Kudari |
| Reliability Estimation for Structure under Fatigue Load Using Probability Theory and Fatigue Crack Growth Model | |
| Ouk Sub Lee, Dong Hyeok Kim, Hong Min Kim, Hye Bin Choi |
| Shielding Effects in Multiple Fatigue Cracks: an Experimental Simulation of Thermal Fatigue Effects, in Stainless Steel 304 | |
| Alain Koster, Mustapha Dib, Luc Rémy, Claude Amzallag |
| Short Crack Growth Behavior and Its Relation to Notch Sensitivity and VHCF | |
| Yoshiyuki Kondo, Masahiro Endo, Arthur J. McEvily |
| Simulation of Failure in Porous Elastic Solids Incorporating Size Effects | |
| Uwe Mühlich, Lutz Zybell, Meinhard Kuna |
| Single Overload Effect in Short Crack | |
| Tomoe Sudo, Masanobu Kubota, Yoshiyuki Kondo |
| Some Feature of Fretting Fatigue Strength/Life and it's Mechanical Clarifications | |
| Toshio Hattori, Minoru Yamashita, Vu Trung Kien |
| Strength Mis-Match Effects on Limit Loads for Surface Cracked Tensile Plates | |
| Tae-Kwang Song, Yun-Jae Kim, Jong-Sung Kim, Tae-Eun Jin |
| Stress State and Limit Equilibrium of Thickness-Inhomogeneous Shell with a System of Arbitrary Located Surface Cracks | |
| Roman Kushnir, Myron Nykolyshyn, Taras Nykolyshyn, Mykola Rostun |
| Stronger and Weaker Singularity of an Inclined Crack Terminating at the Orthotropic Bimaterial Interface | |
| Tomáš Profant, Michal Kotoul, Old?ich Ševe?ek |
| Structure and Properties of Materials after Pressing by the ECAP | |
| Miroslav Gréger, Vlastimil Vodárek, Ladislav Kander |
| Study of Interface Delamination by a Newly Designed Miniature Mixed Mode Bending Setup | |
| Murthy Kolluri, M.H.L Thissen, J.P.M Hoefnagels, J.A.W.van Dommelen, M.G.D Geers |
| Sufficient Criterion of Quasi-brittle Fracture for Complicated Stress State | |
| Vladimir Kornev, Vladimir Kurguzov |
| Tensile and Fatigue Behavior of Poly-p-Phenylene Benzobisoxazole (PBO) Fibers | |
| Noriyo Horikawa, Yukihiro Nomura, Tooru Kitagawa, Yoshio Haruyama, Akiyoshi Sakaida, Takashi Imamichi |
| The Effect of Electromagnetic (i.e. Induction) Stirring of the Melt of Concast Billets on the Reduction of their Surface Defects | |
| Karel Stránský, František Kavi?ka, Josef Št?tina, Bohumil Sekanina, Lubomír Stránský |
| The Evaluation of the Service Life of Thermal Cut Components | |
| Niko Jezernik, Sre?ko Glodež, Janez Kramberger |
| The Influence of Vertex Singularities on Fatigue Crack Shape | |
| Pavel Huta?, Luboš Náhlík, Zden?k Knésl, Stanislav Seitl |
| The Specific of the Creep Process in Hydrogen of the Degraded in Service 2.25Cr-Mo Steel | |
| Andzej Zagórski, Oleksandra Student, Leontiy Babiy, Hryhoriy Nykyforchyn, Krzysztof Jan Kurzyd?owski |
| Weak Fiber\matrix Interface Degradation and the Crack Tip Energy Dissipation. | |
| Kirill Khvostunkov, Aleksey Shpenev |
| Wear Corrosion Characteristics of Various Biomedical Materials in Quasi-Human Body Environment | |
| Yuji Kimura |
| Yield Load Solutions of Heterogeneous Welded Joints | |
| Drazan Kozak, Nenad Gubeljak, Pejo Konjatic, Josip Sertic |