General Papers
| Evaluation of the Stress Intensity Factors for Patched Cracks with Bonded Composite Repairs in Mode I and Mixed Mode | |
| B. BACHIR BOUIADJRA, M. BELHOUARI, N. RANGANATHAN |
| Three-Dimensional Boundary Element Analysis of the Behaviour of Quarter-Elliptical Corner Cracks Emanating from Fastener Holes | |
| B. BOUTABOUT, B. BACHIR BOUIADJRA, N. RANGANATHAN |
| The Effect of Strain Rate on Steel Wires Failure During Cold Drawing | |
| F. GĂLVEZ F., J.M. ATIENZA, J. RUIZ, M. ELICES |
| Description of Fatigue Crack Rate with the Use of AJ Integral Range for Notched Specimens under Tension and Bending | |
| G. GASIAK, D. ROZUMEK, R. PAWLICZEK |
| Influence of Pre-Exposition and Pre-Loading on the Environmental Stress Cracking of a PBT/PBA Co-Poly(Ester Ester) | |
| N.B. KUIPERS, A.C. RIEMSLAG, R.F.M. LANGE, M. JANSSEN, R. MARISSEN, A. BAKKER |
| Limit Equilibrium of a Piecewise-Homogeneous Cylindrical Shell with Cracks | |
| R.M. KUSHNIR, M.YO. ROSTUN |
| Local Approach Treatise of High Y/T - Ratio Steels in the Ductile-to-Brittle Transition Region | |
| A. LAUKKANEN, K. WALLIN, P. NEVASMAA, K. RAHKA |
| Fatigue Crack Growth in Re-welded AISI 4130 High Strength Steel | |
| M.P. NASCIMENTO, R.B. RIBEIRO, H.J.C. VOORWALD |
| Fatigue Crack Growth in Re-welded AISI 4130 High Strength Steel | |
| M.P. NASCIMENTO, R.B. RIBEIRO, H.J.C. VOORWALD |
| Dynamic Correction Functions for K - a Numerical Approach | |
| A. RAGER, J.G. WILLIAMS, A. IVANKOVIC, V. TROPSA |
| The New Criteria of Metals' Bearing Ability Evaluation | |
| YU.I. RAGOZIN, YU.M. GOMZIKOVA, S.A. GOMZIKOV |
| Micromechanical Approach - Transferability of Ductile Fracture Parameters | |
| M. RAKIN, A. SEDMAK, Z. CVIJOVIC, M ZRILIC |
| Effect of Annealing on the Fracture Behavior of Polyethylene | |
| S. RAVI, M. TODO, K. ARAKAWA, K. TAKAHASHI |
| Small Specimen, Accelerated Fracture Mechanics Test Methods for Failure Analysis | |
| L. RAYMOND |
| Crack Resistance Behaviour of Pressure Die Cast Magnesium Alloys | |
| D. REGENER, G. DIETZE |
| Conditions of The "Fish Eyes" Formation in The Process of Hydrogen Induced Destruction | |
| D. RENOWICZ, M. SOZANSKA |
| Crack Growth in Three-Dimensional Structures | |
| H.A. RICHARD, M. SCHOLLMANN, M. FULLAND |
| Microstructure Characteristics Related to the High Temperature Fracture Resistance of the ESIS Silicon Nitride Reference Material | |
| G. ROEBBEN, J.-P. ERAUW, T. LUBE, R. G. DUAN, F. CAMBIER, O. VAN DER BIEST |
| Some Critical Problems of Fracture Mechanics Concerning with Life Assessment of Materials and Structures | |
| O.M. ROMANIV |
| Intersonic Decohesion Along Weak Planes: Experiments and Theory | |
| A.J. ROSAKIS, Y. HUANG |
| Similarity Scaling in 3-D Fatigue Crack Closure | |
| S. ROYCHOWDHURY, R.H. JR. DODDS |
| A New Procedure to Calibrate the Weibull Stress Modulus (m) | |
| C. RUGGIERI |
| Development of a Toughness Testing Technique, for Zircaloy Cladding, Using an Internal Conical Mandrel (ICM) | |
| C. SAINTE CATHERINE, S. CARASSOU, N. RAMASUBRAMANIAN, C. LEMAIGNAN, P. BILLOT |
| Some Remarks on Low Cycle Fatigue Testing and Evaluation Procedures | |
| L. TOTH, P. ROZSAHEGYI |
| Energy absorption in glass-polycarbonate laminates | |
| F.A. VEER, A.C. RIEMSLAG, C. VAN KRANENBURG |