General Papers
| The Effects of Correlated Input Data on Estimates of Failure Probability | |
| R.A. AINSWORTH, Y. LEI |
| Development of Damage in Thin Plates under Cyclic Loading | |
| S.E. ALEXANDROV, E.A. LYAMINA |
| Sensitivity to Defects and Fracture Mechanics for Metallic Materials under Fatigue Loading | |
| B. ATZORI, P. LAZZARIN, G. MENEGHETTI |
| Anisotropic Damage Model for Concrete Including Effect of Crack Closure in Compression | |
| P.B. BADEL, J.B. LEBLOND |
| Failure and Damage Analysis of the Cast Element | |
| M. BIEL GOLASKA M., R. ZUCZEK, J. LACHOWSKI |
| The Geometry and Size Dependence of the Common Format Constraint Factor | |
| J.R. DONOSO J.R., U. MUEHLICH, J.D. LANDES |
| Predictive Fracture Model for the Steady-State Failure of Adhesive Joints Using the «Plastic Wedge Peel Test» | |
| T. FERRACIN, J. SENER, C.M. LANDIS, F. DELANNAY, T. PARDOEN |
| Requirements on the Specimen Geometry to Determine Intrinsic Fracture Mechanics Values of Polymer Materials | |
| W. GRELLMANN, R. LACH, S. SEIDLER |
| Investigations of Stress State in Cracked Steel Specimens and Wide Plates Containing Laser Beam Welds | |
| J. HEYER, P. LANGENBERG, W. DAHL |
| Fully Predictive Model of RCP in Plastic Pipes | |
| A. IVANKOVIC, V. TROPSA, H. JASAK, P.S. LEEVERS |
| Strength of Yttria-Stabilised Zirconia with Near-Surface Grinding Residual Stresses | |
| A. JUY, L. LLANES, M. ANGLADA |
| Critical Planes in the Round Section of an Element Taking the Stress Gradient into Account | |
| A. KAROLCZUK A., A. NIESLONY, T. LAGODA |
| Influence of Pre-Exposition and Pre-Loading on the Environmental Stress Cracking of a PBT/PBA Co-Poly(Ester Ester) | |
| N.B. KUIPERS, A.C. RIEMSLAG, R.F.M. LANGE, M. JANSSEN, R. MARISSEN, A. BAKKER |
| Probabilistic Approach for Modeling of Aggressive Environment Influence on Creep Rupture | |
| D.A. KULAGIN, A.M. LOKOSHCHENKO |
| Time-Changeable Fracture Mechanics Parameters for Polymers under Impact Loading | |
| R. LACH, S. SEIDLER, S. SEIDLER, W. GRELLMANN, W. GRELLMANN |
| Investigation of the Brittle Failure Properties of an A42 Pipeline Steel Butt Weld: Comparison of the Base Metal, Simulated HAZ and Weld Metal | |
| L. LAM THANH, R. PIQUES, A.F. GOURGUES, R. BATISSE, P. WIDENT |
| Stress Corrosion Cracking Study of Austenitic Stainless Steels by the Drop Evaporation Test | |
| S. LASEK, V. CIHAL, M. BLAHETOVA |
| Determination of J-Q Locus for Material of Reactor Pressure Vessel WWER 440 at Cleavage Fracture | |
| D. Lauerova, Z. FIALA, J. NOVAK |
| Local Approach Treatise of High Y/T - Ratio Steels in the Ductile-to-Brittle Transition Region | |
| A. LAUKKANEN, K. WALLIN, P. NEVASMAA, K. RAHKA |
| Failure Probability Model of Buried Pipeline | |
| O.S. LEE, J.S. PYUN, S.W. HWANG |
| Brittle Slow Crack Growth in Polyamide 11: Mechanics and Mechanisms (Creep and Ageing) | |
| X. LEFEBVRE, L. LAIARINANDRASANA, G. PERRIN, A. DRIANCOURT, R. PIQUES |
| A Criterion for Joints Failure | |
| D. LEGUILLON |
| J and Limit Load Analysis of Semi-Elliptical Surface Cracks in Plates under Tension | |
| Y. LEI, P.J. BUDDEN |
| On the Applicability of Magnetic Emission Measurement Technique for Dynamic Fracture Toughness Determination of Large Specimens | |
| GY.B. LENKEY |
| Application of the Beremin-Model for Predicting the Brittle Fracture Resistance of Steel for Spent Nuclear Fuel Containers | |
| GY.B. LENKEY, ZS. BALOGH, L. TÓTH |
| A Study of Post Plating Heat Treatment in Automotive Fastener Steels | |
| B. LONYUK B., R. HOP, D.N. HANLON, S. VAN DER ZWAAG, J. ZUIDEMA, A. BAKKER |
| Residual Fatigue Life of Flash Welded Steel Joints: Microstructural and Overloading Effects | |
| M.R. LOPES, M.V. PEREIRA, F.A. DARWISH, S.H. MOTTA, M.A. CARNEIRO |
| Statistical Evaluation of Composites Fatigue Results Using Normalizing Techniques | |
| M. LÓPEZ-AENLLE, A. FERNÁNDEZ-CANTELI, M.J. LAMELA, E. CASTILLO |
| Fracture Statistics of Brittle Materials: How to Choose a Better Distribution Function | |
| C. LU, R. DANZER, F.D. FISCHER |
| Strength and Fracture Toughness of the ESIS Silicon Nitride Reference Material | |
| T. LUBE, R DANZER, J KÜBLER, J. DUSZA, J.-P. ERAUW, H. KLEMM, V.M. SGLAVO |
| Prediction of Fracture in Plane Elements with Sharp Notches | |
| A. LUKASZEWICZ, A. SEWERYN |
| Initiation and Growth of Thermal Fatigue Crack Networks in a 304 L Type Steel | |
| V. MAILLOT, A. FISSOLO, G. DEGALLAIX, B. MARINI, J.-C. LE ROUX |
| X-ray Tomography of Short Fatigue Cracks in Ductile Iron | |
| T.J. MARROW, H. QETINEL, S. MACDONALD, P.J. WITHERS, A. VENSLOVAS, M. LEONAVIQIUS |
| Methods for Residual Life Estimation of Welded Joints | |
| V.V. PANASYUK, O.YE. ANDREYKIV, M.V. LISHCHYNSKA |
| Evolution of a System of Edge Cracks in the Region of Rolling Bodies Cyclic Contact | |
| V.V. PANASYUK, O.P. DATSYSHYN, A.B. LEVUS |
| Methods for Residual Life Estimation of Welded Joints | |
| V.V. PANASYUK, O.YE. ANDREYKIV, M.V. LISHCHYNSKA |
| Evolution of a System of Edge Cracks in the Region of Rolling Bodies Cyclic Contact | |
| V.V. PANASYUK, O.P. DATSYSHYN, A.B. LEVUS |
| Microstructure Characteristics Related to the High Temperature Fracture Resistance of the ESIS Silicon Nitride Reference Material | |
| G. ROEBBEN, J.-P. ERAUW, T. LUBE, R. G. DUAN, F. CAMBIER, O. VAN DER BIEST |
| Development of a Toughness Testing Technique, for Zircaloy Cladding, Using an Internal Conical Mandrel (ICM) | |
| C. SAINTE CATHERINE, S. CARASSOU, N. RAMASUBRAMANIAN, C. LEMAIGNAN, P. BILLOT |