General Papers
Failure Mechanisms of Composite Sandwich Beams under Impact Loading | |
J.L. ABOT, I.M. DANIEL, E.E. GDOUTOS |
Application of the Master Curve Approach for Dynamically Loaded Pressure Vessel Steels | |
J. BOEHMERT, H.-W. VIEHRIG, A. GOKHMAN |
Fracture of New Joints of Aero Structures | |
M.A. DEBSKI, K.M. GOLOS, D.K. DEBSKI |
The Effect of Strain Rate on Steel Wires Failure During Cold Drawing | |
F. GÁLVEZ F., J.M. ATIENZA, J. RUIZ, M. ELICES |
Fatigue of Materials under Cyclic Loading with Participation of the Mean Load | |
G. GASIAK G., R. PAWLICZEK |
Description of Fatigue Crack Rate with the Use of AJ Integral Range for Notched Specimens under Tension and Bending | |
G. GASIAK, D. ROZUMEK, R. PAWLICZEK |
Stiffness Changes in Fiber-Reinforced Polymeric Matrix Laminates Caused by Intralaminar Damage | |
J. GERMAN |
Modeling of Deformation and Fracture Processes under the Thermomechanical Action | |
R.V GOLDSTEIN, I.V. KADOCHNIKOV, YU.V. ZHITNIKOV |
Dwell Time Effects on Fatigue Life and Damage Mechanisms | |
T. GOSWAMI, J. KROHN, H. HANNINEN |
Initiation and Growth Behaviour of Smooth Specimens Cut from the Squeeze Cast Al Alloy Car Wheels | |
M. GOTO, T. YAMAMOTO, H. NISITANI, N. KAWAGOISHI |
Requirements on the Specimen Geometry to Determine Intrinsic Fracture Mechanics Values of Polymer Materials | |
W. GRELLMANN, R. LACH, S. SEIDLER |
The SIF Calculation of Internal Cracks under Rolling Contact Loads by a Weight Function Approach | |
M. GUAGLIANO, L. VERGANI |
Constraint Effect on Fracture Behaviour on Strength Mis-matched Weld Joints | |
N. GUBELJAK, I. SCHEIDER, M. KOQAK, M. OBLAK, J. PREDAN |
Guideline on Fracture Mechanics Proof of Strength for Engineering Components | |
L. HODULAK, J.G. BLAUEL, C. BERGER, B. PYTTEL, C.P. GERDES |
Local and Global Approaches to Giga Cycles Fatigue Threshold | |
Y. KATZ, Y. MURAKAMI, W.W. GERBERICH |
Influence of Pre-Strain on Fatigue Strength of Squeeze Cast Al-Alloy | |
N. KAWAGOISHI, H. NISITANI, M. GOTO |
Time-Changeable Fracture Mechanics Parameters for Polymers under Impact Loading | |
R. LACH, S. SEIDLER, S. SEIDLER, W. GRELLMANN, W. GRELLMANN |
Investigation of the Brittle Failure Properties of an A42 Pipeline Steel Butt Weld: Comparison of the Base Metal, Simulated HAZ and Weld Metal | |
L. LAM THANH, R. PIQUES, A.F. GOURGUES, R. BATISSE, P. WIDENT |
Controlled Crack Growth with a Dual-Tip Indenter | |
A. MARTÍN-MEIZOSO, J. GIL-SEVILLANO, J.M. MARTÍNEZ-ESNAOLA, M. FUENTES |
Creep and Creep-Fatigue Crack Behaviour of 1Cr- and Modified 10Cr-steels in Air and Inert Gas | |
F. MUELLER, A. SCHOLZ, J. GRANACHER, G. SCHELLENBERG, W. STADTMUELLER, A. KLENK |
The New Criteria of Metals' Bearing Ability Evaluation | |
YU.I. RAGOZIN, YU.M. GOMZIKOVA, S.A. GOMZIKOV |
Fatigue Crack Growth in 0.15C-2Cr-Mo-V Steel After its High Temperature Hydrogen Degradation | |
T. STAHIV, O. STUDENT, I. DZIOBA, M. GAJEWSKI |