General Papers
| A Probabilistic Criteria of Heterogeneous and Defect Materials Fracture | |
| P.M. Vytvytskiy, R.I. Kvit |
| A Crack Propagation in Residual Microstress Field Simulation | |
| T.U. Busheva |
| A Fracture Criterion for Notched Samples of High-Strength Pearlitic Steel | |
| J. Toribio |
| A Numerical Analysis of Stress-Strain State of Contacting Elastic Bodies with Cracks | |
| A.A. Bobylev |
| A Numerical Elastic-Plastic Approach of the Crack Initiation Problem | |
| N.P. Andrianopoulos, V.C. Boulougouris |
| A Unified Model of Brittle Mode I Fracture in Tension and in Compression | |
| V.P. Naumenko |
| Analysis of a Multiple Crack Branching in Non-Isotropic Materials | |
| D. Leguillon |
| Analysis of the J Integral during the Ductile Fracture of Steel and Aluminium Compact Tension Specimens | |
| R. B. Bhagat, M. B. House |
| Bearing Capacity of a Radially Cracked Floating Plate including Crack-Closure Effects | |
| J.P. Dempsey, L.I. Slepyan |
| Behaviour of the Stresses Near Plane Wedgeshaped Defects | |
| G.A. Morari, G. Ya. Popov |
| Boundary Integral Equation Method in Fracture Mechanics | |
| MP. Savruk |
| Calculation of Energy Integral for Bodies with Notches and Cracks | |
| Yu. G. Matvienko, E.M. Morozov |
| Continuous Theory of Deforming and Fracture of Damaged Materials | |
| V.I. Yanko, V.I. Fedenko |
| Crack in Damaged Body at Shear Stress State | |
| V. Tamuzs, V. Pelrova |
| Crack Propagation Criteria in Plates and Shells under Finite Deformations | |
| L.M. Zubov |
| Determination of Thermos tressed State at the Body with Inclusions in Two Dimensional Case | |
| V.K. Opanasovich, R.I. Goi |
| Developing Irwin Formula to Improve the Accuracy of Evaluation of Stresses and Crack Tip Plastic Zone Size | |
| A.M. Dotsenko |
| Effect of Damage on the Crack-tip Field in Power-Law Materials | |
| D. Gross, Ch. Zhang |
| Energy Model of Microcracking and Fracture of Continuously Reinforced Composite Materials by Long-Term Load | |
| M. V. Delyavskii |
| Evaluation of the Reliability of a Flawed Pipe | |
| N. Constancin, D.M. Constantinescu, St. Pastrama |
| Failure Modes of Composites: A Comprehensive Comparison of Tensor Polynomial Criteria | |
| Pericles S. Theocaris |
| FEM Analysis of the Steering Knucle in Elastic-Plastic Fracture Mechanics | |
| E. Rusinski |
| Fractal Approaches in Fracture Mechanics of Heterogeneous Solids | |
| V. V. Silberschmidt |
| Fracture and Equilibrium Damage Accumulation on Post-critical Deformation Stage | |
| A.A. Tashkinov, V.E. Wildeman, A.N. Anoshkin |
| Fracture as a Discrete Process | |
| Yu. I. Ragozin |
| Fracture Behaviour of a Dual Phase Steel having a High Percentage of Martensite | |
| A. Bag, P. Bandopadhyay, K.K. Ray, E.S. Dwarakadasa |
| Fracture of Heterogeneous Two-Dimensional Lattices under the Different Regimes of Loading | |
| N.I. Lebovka, V.V. ank, I.I. Marczin, N.S. Pivovarova |
| Fracture Toughness Evaluation from Tension and Charpy Type Specimens Based on Micromechanical Material Models | |
| D.-Z. Sun, W. Brocks, W. Schmitt |
| Gradient Criteria of Strength and Their Relation with Linear Elastic Fracture Mechanics | |
| M.D. Novopashin, M.A. Legan |
| High-Order Asymptotic Fields at the Apex of a Notch in a Power-Law Hardening Bimaterial | |
| Y. Shou-wen, Y. Ming |
| Identification of Stress State in the Critical Zone in Upsetting of Prismatic Specimen by Cylindrical Dies | |
| D. Vilotic, M. Plancak, V. Vujovic |
| Influence of Preliminary Plastic Deformation on Crack Resistance | |
| V.T. Troshchenko, P.V. Yasnii |
| Internal Plastic Incompatibilities Accumulation as Factor of Hardening and Damage of Deformed Heterogeneous Materials | |
| A.A. Zisman, V. V. Rybin |
| Investigation of a Kinked Crack System with Generalized Stress Singularities by means of the Integral Equation Method | |
| W. Meiners, K.P. Herrmann |
| Investigation of the Stressed Nonlinear Elastic Plane with Cracks | |
| L.G. Doborjginidze |
| Investigation on the Singularities of Asymptotic Solutions in Stationary Crack and Steady Crack Growth with Elastic-Plastic Material | |
| T.M. Guo, W. Brocks |
| Limiting State of Construction Elements with Different Kind of Damages | |
| N.M. Borodachev, Yu.I. Kazarinov, O.A. Shevchenko |
| Modelling of Creep Crack Growth under Constant and Cyclic Loading | |
| V.I. Astafjev, V.A. Paslukhov |
| Models of Elastic-Plastic State and Crack Growth for Mixed Modes under Biaxial Load | |
| N.A. Makhutov, V.N. Shlyannikov, V.A. Dolgorukov |
| Modified Crack Closure Integral (MCCI) using Quarter-Point Three Dimensional Elements | |
| K. Badari Narayana |
| Non-linear Analysis of RC Slabs and Panels by the Boundary Element Method | |
| M. Minch, D. Stys |
| Non-linear Line Spring Model and Complementary Energy Method of Surface Crack | |
| Q. Gao, Z.Z. Huang |
| Numerical Methods of Fracture Mechanics Parameters Calculation | |
| E.M. Morozov, T.A. Chernysh |
| Object-Oriented Approach for Expert System Development in Structural Integrity Assessment of Cracked Vessels | |
| V. Pocajt, V. Ogarevic, S. Sedmak, V. Ljubinkovic |
| On a General Three-Dimensional Weight Function Method | |
| A.N. Borodachev |
| On a Numerical Investigation of Boundary Collocation Procedure and Williams Series Convergency | |
| X. Yan, X. Yang |
| On Maximal Stresses in Elastic Isotropic Plane with a Crack of Nonlinear Deformations | |
| I. A. Prusov, I.V. Prusova |
| On Stress State of Fibrous Composite with Crack in Matrix | |
| A. V. Pavlenko, T.S. Kagadiy |
| On the Applicability of Damage Models for the Description of the Failure Behaviour of Ductile Steels | |
| K. Kussmaul, M. Seidenfuss, U. Eisel |
| Physical and Mechanical Model of Intercrystalline Fracture by Static and Cyclic Loading | |
| B. Z. Margolin, V.A. Shvetsova, A.G. Gulenko |
| Plastic Strip Model Solutions for Plane Problems of Fracture Mechanics | |
| V. V. Panasyuk, M.P. Savruk, A.M. Danilovich |
| Quasimicroplastic Properties of Solids at Pre-Fracture Stage | |
| G.G. Kochegarov, E.I. Mashinsky, V.Z. Koksharov |
| Reinforcement of a Cracked Plate by a System of Parallel Stringers | |
| G.S. Ivanyts'ka, V.S. Kravets'and O.I. Semenets' |
| Several Plane Problems of Brittle Fracture Mechanics for Cracks with Interacting Edges | |
| I.I. Kudish |
| Slip-Lines in the Corner Point of the Media-Separating Boundary | |
| L.A. Kipnis |
| Some Recent Results on Crack-Tip Analysis | |
| K.C. Hwang, T.F. Guo |
| State of the Art in BEM Applications to Fracture Mechanics of Anisotropic Media | |
| S. V. Kuznetzov, A.N. Kulikovski, M.N. Perelmuter |
| State-of-the Art on Deterministic Fractals in Fracture | |
| B.K. Raghuprasad, G.S. Bhattacharya |
| Stochastic Approach of the Reliability of Fibreglass Reinforced Laminated Wood Joining Pieces for Glulam Construction | |
| C. A. Sziics, Ph. Jodin, G. Pluvinage |
| Strain Energy Release Rate at a Crack Tip; Evaluations by a Mixed Hybrid Element | |
| R.-M. Courtade, P. Hamelin |
| Stress Analysis of Infinite Plate with Two Unequal Arbitrarily Oriented Cracks | |
| KG. Ukadgaonker, V.K.P. Koppaku, P.J. Awasare |
| Stressed State of Anisotropic Cylindrical Shells with Cuts | |
| I. B. Prokopovych, L.M. Senkiv |
| The Influence of Stress State and Stress History on Crack Occurrence | |
| M. Plancak, D. Vilotic, V. Vujovic |
| The Influence of the Type of Stress State on the Fracture Toughness of Pressure Vessel Steels in Different States | |
| A.A. Lebedev, N.G. Chausov, Yu.G. Dragunov, A.V. Getmanchuck |
| The Residual Stresses Influence upon the Body Wedged Out by the Rigid Inclusions | |
| V. Silovanjuk |
| To the Question of Crack Growth Resistance Determination of Elastic-Plastic Materials within C Model | |
| I.M. Panko, B.M. Zaidel |
| Uniform Criteria for an Estimate of the Material Local Stress State at the Crack Tip | |
| G. V. Klevtsov, L.R. Botvina |
| Variant of Statistic Theory of Brittle Strength of Glass Structures and Their Operate Reliability | |
| A.M. Margolin, V.A. Osadchuk |
| A Hypothesis of Cumulative Damage for Fatigue Crack Initiation and Propagation | |
| K.M. Golos |
| A Lagrangian Description of the moving Crack Problem | |
| G. Dehruyne |
| A Model of Fatigue Crack Propagation by Striation Mechanism | |
| V. Kramarenko |
| A Nonstastionary Three-Dimensional Problem of Concentration Stress in Elastic-Plastic Bodies | |
| P.A. Stebljanko |
| A Numerical Model for Pitting Corrosion Kinetics in Pressurized Pipelines | |
| A.H. Baraov |
| A Unified Approach to the Crack Path Instability Phenomena | |
| N.P. Andrianopoulos, S.K. Kourkoulis |
| An Investigation on the Threshold Stress Intensity Factor for Environment Assisted Cracking of a Ni-Cr-Mo Steel by a Simple Technique | |
| K.K. Ray, G.R. Rao |
| Analysis of Direct and Back Effects under Wear-Fatigue Damages | |
| L.A. Sosnovskiy, V.A. Shurinov |
| Analysis of Fracture Processes under Dynamic Loading | |
| A.I. Rouzanov |
| Application of T*-Integral to the Crack Propagation Analysis under the Quasi-Stastic and Dynamic Loading | |
| V.I. Kostylev, B.Z. Margolin |
| Brittle Plate Failure under Impact Effect | |
| A.I. Sadvrin |
| Constraint of Side-Groove and its Influence on Fracture Toughness Parameter in Charpy-Size Specimens | |
| X.P. Zhang, Y. W. Shi |
| Corrosive Medium Accumulation Near Cracks and Inclusions in Stressed-Deformed Materials | |
| M. G. Stashchuk |
| Covariance Effect of Biaxial Stress State on Fatigue Life Calculations | |
| C.T. Lachowicz, T. Lagoda, E. Macha |
| Crack Resistance of the Structural Element with a Small Crack | |
| V. V. Konovalov, I.S. Yablonskv |
| Criterion of Dynamic Fracture of Brittle Solids 192 | |
| Yu. V. Petrov |
| Damage and Fracture of Structural Materials under Complex Low-Cycle Loading | |
| V.S. Mozharovski, N.I. Bobyr, O.N. Mukoida |
| Determination of Corrosion Causes in Inter-Superheated Piping | |
| V. Sijacki-Zeravcic, A. Milosavljevic, A. Markovic, Z. Atamenic, K. Kovacevic, B. Andelic, D. Milanovic |
| Discussion of the Two-Dimensional Fracture Surface Marks obtained by the Model of a Primary Crack Propagating Circularly | |
| A. akimoto, T. Fujii |
| Dynamic Fracture in Solids under Pulse Deformation | |
| R.I. Nigmatulin, N.Kh. Akhmadeyev, R.Kh. Bolotnova |
| Dynamic Fracture of Elastic-Plastic Beam with an Edge Crack | |
| Y. Lu, G. Tang |
| Dynamic Fracture Toughness Determination using the CCS Technique: Application to PMMA | |
| D. Rittel, H. Maigre |
| Dynamic Tensile Fracture Phenomena at Wave Propagation in Ceramic Bars | |
| J. Najar |
| Effect of Applied Potential on the Corrosion Fatigue Crack Growth Rate in Titanium Alloys | |
| S.A. Shipilov |
| Effect of Frequency on Environmentally Assisted Fatigue Crack Growth in Aluminium Alloy 7150-T651 | |
| D. B. Gingell, J. E. King |
| Effects of Selective Variable Amplitude Loading on Fatigue Crack Growth | |
| M. A. Santos Torres, H. J. C. Voorwald |
| Elastic-Plastic Finite Element Simulation of Crack Tip Deformation in Fatigue | |
| M.M.I. Hammouda, H.E.M. Sallam |
| Electric Current Effect Investigations on Metal Fatigue Life | |
| V. V. Karpenko, A.E. Podgorodetsky |
| Embrittlement of Quenched Steel under the Effect of Ultra Low Concentrations of Diffusion-Mobile Hydrogen | |
| V. V. Velichko, V. V. Zabilsky |
| Evolution of the Structural Changes in Superficial Layer during Early Fatigue Process | |
| L. Palaghian, C. Gheorghies |
| Failure of Discs Material and Structural Strength of Disc Blade Joints under Near-Operating Conditions | |
| N.S. Mozharovski, A.A. Zakhovavko, S.N. Shukayev, A.B. Ovseyenko, A. Yu. Medinets |
| Fatigue Analysis Method for Wing Lower-Surface Elements of Transport Airplane at Random Loading | |
| V. Abramov, V. Strizhius |
| Fatigue Behavior and Life Predictions for AZ91E-T6 Cast Magnesium Alloy | |
| R.I. Stephens, S.N. Perov, D.L. Goodenberger, V.V. Ogarevic |
| Fatigue Behaviour of a 12 mm Thick Titanium Grade 2 Plate | |
| I..M. Plaza, A.M. Irisarri |
| Fatigue Crack Growth of CCT Specimen under Spectrum Loading of a Steam Line | |
| Z. Huang, J. Song, J. Cheng |
| Fatigue Crack Growth Rate and Fracture Toughness of Different Grades of Rail Steels | |
| U.P. Singh, R. Singh |
| Fatigue Crack Growth Resistance of HK-40 Steel in Gaseous Hydrogen | |
| K.M. Nykyforchyn, I.D. Skrypnyk, O.Z. Student |
| Fatigue Crack Propagation in Ta6V at Elevated Temperature | |
| J. Petit, C. Sarrazin, W. Berata, S. Lesterlin |
| Fatigue Life Estimation under Non-Stationary Random Loading | |
| M. Bilv, J. Prohacka |
| Fatigue of an Aluminide Coated Nickel-Base Superalloy at 600 °C — Effects of Brittle Pre-Cracking | |
| T.C. Totemeier, J.E. King |
| Fretting Fatigue Resistance of Aluminium Joints | |
| D. Kosteas, R. Ondra |
| HCF and LCF Fracture Mechanism of a Commercial Purity Zirconium | |
| X. Lin, G. Haicheng |
| High-Strength Corrosion-Resistant Steels Toughness after Heating at 623-773 K | |
| A.F. Petrakov, G.S. Krivonogov, S.I. Birman, G.A. Khakhaleva |
| Hydrogen Assisted Stress Cracking of Titanium Alloys | |
| L. Azkarate, A. Recio, A. Del Barrio |
| Hydrogen Embrittlement of Metals in Thermal Power Station Water-Steam Circuits | |
| A. B. Vainman |
| Investigation of Influence of the Scale Factor on Corrosion Stability of Titanium Alloys | |
| V.F. Lukvanov, M. V. Soltovets, A.V. Shumilin |
| Life Estimation for Fatigue Crack Nucleation and Growth at the Notch Root | |
| M. M. Stadnyk, R. V. Riznvchuk, I. V. Didukh |
| Linear Elastic Fracture Mechanics Interpretation of Crack Growth Behaviour in Fretting Faligue | |
| U.S. Fernando, M. W. Brown, K.J. Miller |
| Local Damages and Materials Durability Prognostication for High Parameters Medium | |
| R.A. Khadyrhekov. P.A. Pavlov, V.N. Pechersky, V.V. Borisevitch |
| Mathematical Modelling of Dynamic Processes of Deformation and Microfracture of Thermo-Elasto-Plastic Media | |
| A.B. Kiselev, M.V. Yumashev, A.S. Zelensky |
| Model of Fatigue Crack Initiation and Growth | |
| V. V. Panasyuk, O.P. Ostash, Ye. M. Kostyk |
| Modelling Strain Rate Effect on Behaviour of the Plastic Zone Near a Crack Tip in Mode II | |
| I. V. Varfolomeyev, J.R. Klepaczko |
| Nature of Rebinder Effect by Non-Organic Dielectrics and Rocks Failure | |
| V.D. Evseyev |
| New Possibilities in Investigating Fracture of Materials with Hydrogen | |
| K.B. Katsov, V.I. Tkachev |
| On Some Features of Failure at Multiaxial Cyclic Loading | |
| V.N. Stebenev, Yu.A. Svirsky |
| Plastic Zones around Notch Tips after Cyclic Loading | |
| A. Csizmazia, E. Czoboly |
| Prediction of Constant-Amplitude Fatigue Life to Failure under Pulsating-Tension (R > 0) by Use of the Local-Strain-Approach and The Problem of Proper Choice of K | |
| A. Buch, V. Galperin |
| Principle of Maximum Energy Dissipation Rate in Crack Dynamics | |
| L.I. Slepyan |
| Relationship between Microstructure Parameters and Static Fatigue of Structural Steels in Sour Environment | |
| E. Mezancova, K. Mazanec |
| Rupture Kinetics and Fatigue Lifetime of Cracked Plates considering Two-Stage Fracture | |
| VP. Golub, E.A. Panteleyev |
| Short Cracks Fracture Mechanics | |
| A.N. Vasyutin |
| Some Problems of Dynamic Fracture Mechanics | |
| I.V. Livknvtsev, D.B. Kramarovsky |
| Static Crack Resistance of Hvdrogenated High-Strength Steels | |
| A.F. Petrakov, G.S. Krivonogov |
| Structural Changes and Material Failure under Hydrogen Influence | |
| V.A. Goltsov, A.F. Volkov, A.P. Kusin. Yu.A. Artemenko, N.N. Vlasenko |
| Substructural Deteriorations of Aluminium Alloys at Normal Service Conditions | |
| KM. Polyanski, L.A. Kurtasova |
| The Critical Condition for Ductile/Brittle Transition in Impact Notch-Bend Test | |
| W.S. Lei, M. Yao, C.T. Tian, D.M. Li |
| The Development and Use of Environmentally-Assisted Cracking Models for Light Water Reactors | |
| F.P. Ford |
| The Dynamic Thermoelasticity Problem for a Plate with a Moving Semi-Infinite Cut | |
| A.I. Zhornik, E.M. Kartashov |
| The Effect of Power Plant Environment on Fatigue Crack Growth of Pipe Steels | |
| E.A. Grin |
| The Effect of Seawater Exposure on the Fatigue Delamination Growth of a Polymeric Composite | |
| P. Chiou, W.L. Bradley |
| The Fatigue Properties of a Corrosion Protective Surface Coating | |
| J.H. Bulloch |
| The Influence of Hydrogen on Fracture Toughness and Crack Growth in Titanium Alloys | |
| A. V. Malkov, V.K. Alexeev, M.G. Mishancva |
| The New Approach to Description of the Interaction between Hydrogen Atoms and Defects of Structure in Metals | |
| N. Krapivnyi, V. Kleshnja, N. Minagureeva, V. Sobornitski |
| The Numerical Analysis of Composite Materials Dynamic Fracture | |
| G. Evseev, S.A. Sylantiev, G.P. Zaytsev |
| The Propagating Fatigue Crack Length Estimation based on Crack Opening Value at the Specimen Edge Measurement Results | |
| C.Z. Goss, J. Lesniewski, S. Klvsz |
| Theoretical and Experimental Investigation of Dynamical Deformation and Fracture of Fiber-Reinforced Composites | |
| S. V. Stepanenko, A. V. Asevev, G.E. Makarov |
| Theoretical Studies in Kinetics of Fatigue Surface Failure | |
| L.G. Gorvacheva, O.G. Checkina |
| Three-Dimensional Problems on Crack Growth on Mechanical and Diffusion Loading | |
| A. V. Balueva |
| Two-Parameter Model of Fretting Fatigue Crack Growth in Structural Alloys | |
| V. T. Tmshchenko, O.V. Tsybanev, A.O. Khotsyanovsky |
| Advances in Mechanism of Cleavage Fracture at Low Temperature: Part I. Critical Event | |
| J. H. Chen, C. Yan |
| Analytical Investigations of Fracture and Accompanying Thermal Effects in Superconductors under Lorentz Forces | |
| I. V. Simonov, E.A. Devjatkin |
| Application of a Crack Growth Model to Silicon Nitride | |
| R. Mohrmann, M. Rombach |
| Application of Deformation Criterion for Estimation of High Temperature Fatigue Crack Growth | |
| O.M. Romaniv, G.M. Nykyforchyn, O.Z. Student, l.D. Skrypnyk |
| Calculations of the Supporting Power of Parts with Cracks in Cases of Brittle or Quasi Brittle States of Material | |
| N.A. Kostenko |
| Cold Brittleness Criterion for Notched Steels | |
| S.A. Kotrechko, Y.Y. Meshkov, G.S. Menus |
| Computer Simulation of Microstructure Processes by Ferroelectric Ceramic Sintering and Fracture | |
| D. N. Karpinsky, I.A. Parinov |
| Crack Spreading in Viscoelastic Bodies with account of Ageing Material Peculiarities | |
| V. M. Pestrikov |
| Cracking in Surface-Adjacent Layers of KDP Single Crystals: Effect of Local Stress Concentration Regions | |
| L V. Atroshchenkn, A.I. Kolodyazhnyi, M.I. Kolybayeva, V.I. Salo, V. V. Khodeyeva, L.A. Chirva |
| Creep Crack Growth Criterion | |
| S.I. Olkin |
| Creep Damage Occurrence in an Inter-Superheater Steam Pipe after 90,000 Hours of Operation | |
| V. SijaHki-Zeravcic, A. Markovic, Z. Stamenic, D. Milanovic, P. Knezevic |
| Creep Failure in Linear and Nonlinear Viscoelastic Materials | |
| A.N. Joshi |
| Creep Fracture in Hastelloy XR | |
| A.T. Kikuchi, I.J. O'Donnell |
| Creep Rupture Properties of Cr-Mo Steel | |
| S. Ahila, S. Ramakrishna Iyer |
| Critical Cleavage Stress F and Problem of "Brittle" Strength of Metals | |
| S.A. Kotrechko, Y.Y. Meshkov, O.S. Melius |
| Damage Characteristics of Laser-Material Interaction in AlLiCuMg Alloy | |
| A. Milosavljevic, M. Sreckovic, M. Dinulovic, K. Kavacecic, B. Andlecicc, R. Prokic-Cvetkovic, Z. Radakovic, M. Radavic |
| Deformation and Failure Mechanisms in a Spray Formed Al Alloy-SiC Composite | |
| J. Llorca, J. Ruiz, M. Elites |
| Deformation and Fracture of Nodular Iron with Ferrite Matrix | |
| Z.R. He (He Zerong), S. Ji, G.X. Lin |
| Deformation Localization and Prefailure of Steels under Low Temperature | |
| V.P. Gulyaiev |
| Destruction of KDP Single Crystals at Tetragonal-to-Monoclinic Modification Phase Transition | |
| L.V. Airoshchenko, M.I. Kolybayeva, M.A. Rom, V.I. Salo, V.F. Tkacftenko, V V. Khodeyeva |
| Determination of Parameters for Numerical Models of Concrete Fracture | |
| J.G.M. Van Mier, E. Schlangen |
| Effect of Anisotropy on Crack Resistance of Polymer Composites for Aircraft Building | |
| B. V. Perov, A.G. Khanin, S.A. Katyukha |
| Effect of Environment and Stress Ratio on the Fatigue Crack Propagation of Polycarbonate | |
| N. Singh, R. Khelawan |
| Effect of Gamma Prime Precipitate Size on the Mechanical Properties of a Cast Nickel-Base Superalloy | |
| A .A. Tipton |
| Effect of Heat Treatment on Stiffness and Damping of SiC/Ti-15-3 | |
| Joseph E. Grady, Bradley A. Lerch |
| Energetic Approach to Fracture Toughness Estimation of Hardened Cement Paste and Concrete | |
| Vu.V. Zaitsev, V.I. Shevchenko |
| Enhancement of Tensile Properties of Al/SiCp MMC Sheet by Optimisation of Solution Treatment | |
| M. P. Thomas, T. Kilgour, J.E. King |
| Epoxy-Epoxy Bimaterial Interface Cracks in Annealing Residual Stresses | |
| M. R. Shanbhag, S.K. Maiti. K. Eswaran, P.B. Godbole |
| Experimental Study of Micromechanisms of Brittle-to-Ductile Transition in Si Single Crystals | |
| K.J. Hsia, A.S. Argon |
| Faatigue and Fracture of Microalloyed Steels: An Overview | |
| A. Fatemi, L. Yang |
| Forecasting Metallic Material Creep and Failure under Static Loading | |
| R.G. Teteruk |
| Fracture Behaviour of a Dual Phase Steel having a High Percentage of Martensite | |
| Vittorio Di Cocco |
| Fracture Kinetics of Ceramic Materials in Controlled Crack Growth Test | |
| S.P. Kovalev, V.M. Chushko, V.G. Burovik |
| Fracture Mechanism of Structurally and Crystallographically Textured Titanium Billets | |
| M A. Skotnikova, A.S. Kudrjavtsev |
| Fracture Mechanisms and Fracture Toughness of Chromium | |
| A. V. Sameliuk, W.P. Brodnikovsky |
| Fracture Mechanisms and Fracture Toughness of Molybdenum | |
| A.Yu. Kovai, A.I. Bankovski |
| Fracture Mechanisms of Materials with a Brittle-Ductile Transition | |
| A. D. Vasilev |
| Fracture of Steel and Cast Iron at Low, Room and High Temperatures | |
| I.P. Volchok, O. B. Kolonlkin |
| Fracture Toughness of Heterogeneous Martensite in Hypoeutectoid Low Alloyed Steel | |
| I. Dlouhv, J. Skarek, M. Holzmann |
| Generalized Continual Theory of Dislocations | |
| Y.M. Krilchevets. I.M. Tiiarenko, A.A. Kartysh |
| High Temperature Crack Growth in Dissimilar Media | |
| T. Chuang, J.L. Chu, S. Lee |
| High Temperature Embrittlement of Steels: The Role of Aluminium and Sulphur | |
| R.M. Nikonova, V. V. Zabilsky |
| Influence of Mode II Stress Intensity Factor on the Fracture Toughness of Concrete | |
| D. Stys, M. Minch |
| Influence of Physical-Mechanical Characteristics of Rock Thickness, Bore-Solution Density and Tectonic Strength Value on Stressed State Around Deep Borehole | |
| A.M. Alimzhanov |
| Influence of Thermocycling on Structure and Mechanical Properties of the Aluminium-Boron Composite Material | |
| A V. Filipovskii |
| Laser-Pulse Interaction with Cu and Ti under Atmospheric Pressure and Vacuum | |
| A. Milosavljevic, V. Sijacki-Zeravcic, M. Dirtulovic, M. Sreckovic, V. Rajkovic, M. Milosavljevic |
| Low Cycle and Thermomechanical Fatigue Behaviour of an Advanced ODS Nickel Base Superalloy | |
| M. Marchionni, E. Picco, D. Ranucci |
| Mathematical Modelling of Crack Development in Ceramics Under Contact Loading | |
| V. A. Gorelsky, S.A. Zelepugin |
| Measurement of the Fracture Toughness of Polymer Concrete | |
| H.C. Pembenon, F.S.D. Tinsley, J.E. King |
| Micromechanical Model of Ceramic Matrix Composite Reinforcement Based on Discrete Fiber Distribution | |
| Asher A. Rubinstein |
| Microstructural Aspects of Localization of Deformation and Destruction of Structure-Inhomogeneous Materials | |
| L V. Kuksa |
| Mixed Mode Dynamic Fracture of a Ceramic | |
| X. P. Zhang, R. Neviere, G. Pluvinage |
| Modelling of the 90° Ply Fatigue Crack Growth along the Width of Cross-Ply Carbon/Epoxy Coupons | |
| C. Henaff-Gardin, E. Urwald, M.C. Lafarie-Frenot |
| Nontraditional Approach to Definition of Rock Stability Parameters of Near-Contour zone of Underground Working, Deep and Superdeep Boreholes | |
| M.T. Alimzhanov |
| Numerical Method for Modelling Creep Crack Propagation by Diffusive Void Growth | |
| S.P. Witts, A.C.F. Cocks |
| On One Possible Approach to Estimating Fracture Time under Creep Conditions | |
| V.P. Poshivatov |
| On Structural Aspects of Fracture Toughness of Materials with Limited Plasticity | |
| S.A. Firstov |
| On the Singular Character of Thermal Stress for Non-Homogeneous Body with Sharp Notch | |
| V.A. Kondratev, S.L. Tarakanov |
| Phase Transformations in Plastic Zones of Austenitic Fe-Ni and Fe-Mn Steels | |
| N.A. Gorhatenko, G. V. Klevtsov |
| Pressurized Thermal Shock Tests with Model Pressure Vessels | |
| H. Keinanen |
| Some Features and Micromechanisms of Materials Fracture in the-Brittle-to-Ductile Transition Region | |
| A. J. Krasowsky |
| Specific Requirements for Cryogenic Use of Materials for Space Engines | |
| J.K. de Manicaull |
| Strength and Fracture of Elastic and Brittle Bodies at Thermal Loading | |
| A.G. Lanin |
| Studies of Creep Crack Growth under History-Dependent Loading | |
| F. W. Brust, B.S. Majumdar |
| Study on Wood Fracture Properties by Holographic Interferometry And Numerical Simulation | |
| P. Navi, J. Wang, C. Huet, P.K. Rastogi, L. Pflug |
| Tensile Tests in SEM of 6061/SiC Composites | |
| A. T. Dumitrescu, M. Suery |
| The Effect of Recrystallization on Aluminium Alloys Crack Resistance | |
| P. Miklyaev, D.A. Andreev |
| The Effect of the Chemical Composition and Heat Treatment on the Transition Temperatures of the Low Alloy C-Mn Steel Plates | |
| J. Fila, Z. Zatorski |
| Themodynamics of Single and Polycrystals Defective Structure | |
| V. Fedmeev |
| Transformation Toughening and Fracture in Cu-Al-Ni Shape Memory Alloys | |
| A. V. Cherepin. I A. Lushankin, E.P. Pechkovsky |
| A New Analytical Method of the Determination of JIc by using Single Specimen | |
| X. Jing, Y. Zhen, B. Lou, F. Shen |
| A Prediction of an Endurance of Welded Structures taking into Account an Effect of Technological Factors | |
| V.P. Leonov, A. V. Iljin |
| A Theoretical and Experimental Method for Fracture Parameters Investigation of Cracked Structures | |
| S. V. Shkarayev |
| Acoustic Emission Monitoring of Cutting Process | |
| V.E. Wainberg, L.I. DekhtyaR, V.K. Andreychuk |
| An Engineering Analysis Procedure for Crack Driving Force in Welds | |
| Y. IV. Shi, J.X. Zhang, M.J. Tu |
| Application of Dimensional Analysis Method to Generalization of Results of Specimens Fatigue Tests at Various Loading Conditions and Test Temperatures | |
| B. F. Fedorenko |
| Application of Fracture Mechanics Approaches for Perfection of Strength Calculations of Welded Joints and Structure Members | |
| V.I. Makhnenko |
| Approximation for J based on the Neuber's Relation for Stress and Strain Concentration Factors | |
| R.V. Riznychuk, S. Ye. Kovchyk, I.B. Rvbytskyj |
| Asymmetric Crack Extension under Static Loading in Finite Plate | |
| S.I. Yemelvanov |
| Bend Durability Prediction in the Design and Operation of Power Plant Pipes | |
| V.K. Adamovich, A. V. Schedrin, I.I. Minz |
| Breakage Mechanisms of Complex Parts of Aviation Structures with Account for Technological Heritage | |
| AS. Zhemakov. I.N. Budilov, V.A. Savchenko |
| Brittle Fracture Behavior of Welded Wide Plate with Non-continuous Stiffners | |
| Y.H. Zhang, A.D. Jia |
| Calculation and Control of the Technical State of Elements and Structures with Cracks | |
| V.P. Gulvaiev |
| Computer System for Calculation of Welded Joints with Fillet Welds | |
| T.G. Ryabchuk |
| Corrosion Cracking in Sheet Welded Structures | |
| S.K. Fomichov, V.M. Prokhorenko, O.I. Steklov, V.A. Vetigin |
| Corrosion-Fatigue Crack Growth Resistance Testing | |
| I.V. Ratych |
| Crack Growth Curves for Aluminium Weldments | |
| D. Kosteas, R. Ondra |
| Crack-Resistance Tests of Materials: State and Outlooks | |
| V. A. Makhutov, I.A. Razumovskij, A.I. Tananov |
| Cracks Kinematics for Brittle Fracture of Rocks in Blasting and Percussive Failure | |
| E.N. Sher, P.A. Martynyuk |
| Cyclic Crack Resistance of Welded Joints with Non-Uniform Fields of Residual Welding Stresses | |
| V.I. Trufiakov. P.P. Mikheev. V.V. Knysh, I.S. Kovalenko |
| Cyclic Elasto-Plastic Fracture Diagram for a Specimen with a Crack and Its Analysis | |
| L.A. Sosnovskiy, A.V. Bogdanovich |
| Destruction of Transmission Towers and Methods for increasing of Reliability of Existing Power Lines | |
| N.A. Senkin, V.I. Kucheryavy |
| Determination of Metal Fracture Toughness by Method of Thermal Impulse | |
| V. Remorov |
| Development of Methods and Algorithms for Nondestructive Electromagnetic Testing of the Lamellar Composites | |
| B. I. Kolodiy, O.B. Ljashchuk |
| Diagnostics and Forecasting of Welded Structure Residual Life (State of the Art and Prospects of Development) | |
| A.Ya. Nedoseka |
| Dividing Grids Method in Experimental Fracture Mechanics | |
| V. Yu. Goltsev, Yu. G. Matvienko |
| Eddy Current Estimation of Structural Changes in Thin Surface Layers on Nonferrous Materials | |
| V.N. Uchanin |
| Effect of Hydrogen on Brittleness of Structural Steels and Welds | |
| I.K. Pokhodnya, V.I. Shvachko |
| Electromagnetic Methods of Nondestructive Testing in Fracture Mechanics | |
| I.T. Nazarchuk |
| Engineering Application of Fracture Mechanics to Aircraft Structure Damage Tolerance Estimation | |
| I. Nesterenko |
| Estimation of Fatigue Life of Structural Members under Irregularly Varying Loads | |
| Yu.A. Svirskv |
| Estimation of the Residual Stresses Influence upon Plane Welded Joints Strength | |
| I.I. Trush, M.P. Berezhnvtsk |
| Evaluation of Mechanical Properties and Defects in Cast Iron Castings by Ultrasonic Method | |
| E.S. Ivanushkin |
| Fatigue Life Prediction Method based on Energy Criterion | |
| P. A. Fomichev V.V., Zvyagintsev I.Y., Trubchanin A. |
| Fatigue Life Prediction of Welded Structures based on Combination of Strain and Stress Approaches | |
| L.K. Steinzeig, K.P. Mandjula |
| Fractal Analysis of Fracture Surfaces of Constructional Steels | |
| A. A. Emelyanov, L.E. Portnov. I.J. Peshminlzev, J.V. Pospelov |
| Fractodiagnostics - Problems and Methods | |
| L. Bolvina |
| Fracture Behaviour of Compact Tension Specimen in High Vacuum Atmosphere under Plane Strain Conditions | |
| M.R. Sabayo |
| Fracture Behaviour of Low Alloy Steel Weldments | |
| J.D. Parker, A.W.J. Parsons |
| Fracture Criteria for 18Cr-10Ni-Ti Stainless Steel Piping | |
| A.P. Bobrinsky. A.F. Getman, V. Yu. Goltsev, V.M. Markochev |
| Fracture Mechanism in the Process of Bar Rolled Stock Breakage | |
| V.A. Timoshchenko, V.V. Kirilovski |
| Fracture of Plates and Shells with Cracks with Account for the Local Stability Loss | |
| A.N. Guz', M. Sh. Dyshel' |
| Fracture Properties of the Selected Ferrous Materials used in Power Transmission Line Hardware | |
| Gouri S. Bhuyan, Dave H. Carter |
| Fracture Toughness of Structural Materials and Their Welded Joints | |
| M.S. Kogut, V.A. Shabaikovych |
| Fracture Toughness of Welded Joints under Static and Dynamic Loading | |
| V.I. Kir 'yan |
| Generation of Acoustic Emission Pulses during Coherent Fracture | |
| V.I. Ivanov |
| High-Strength Steels for Operation in Cryogenic Fuels | |
| A. F. Petrakov, G.S. Krivonogov, V.I. Kozlovskaya, O.A. Krylova |
| Holographic Diagnostics of Welded Joints and Structures | |
| L.M. Lohanov, V.A. Pivtorak |
| Improvement of Impact Toughness of Steel Welded Joints by Explosion Treatment | |
| V.G. Petushkov, Yu.L. Fadeenko. E. Ya. Lokshina, S.N. Smirnova, A.I. Grishaenko, I.E. Titova |
| Influence of In-Service and Technological Factors on the Cyclic Fracture Toughness of Turbojet Blades | |
| M. Nikhamkin. Yu. Plotnikov, I. Konev, L. Voronov, N. Plotnikova |
| Influence of the Welding Technology on Cracking Resistance of the Titanium Pseudo-Alpha-Alloys | |
| A.A. Trufanov. V.I. Mikhailov, V.A. Sher |
| Investigation of AE Properties of the Hoists | |
| V.R. Skalsky |
| Investigation of Separation Processes for Construction Elements and Materials at Impulse Loading | |
| Yu.S. Vorobiev. A. V. Kolodyazhnv, V.I. Sevryukov |
| Investigation on Crack Propagating Characteristic of Welded Joints | |
| H. Lixing, Z. Yufeng |
| Longlife Prognostication of Sliding Tribosystems with Contours - A Slight Difference from Circular Ones | |
| M.V. Chernets |
| Metallurgical and Technological Aspects of Brittle Behaviour of Titanium Alloys | |
| V.V. Klyackina, K.M. Polvanski |
| Method for Determination of the Fatigue Crack Extension Resistance Characteristics | |
| V. Ya. Yarema |
| Method for Determining Crack Resistance of Materials under Biaxial Loading | |
| A. V. Boiko |
| Method for Evaluation of Possibility to Prolong Service Life on the Basis of Selective Inspection Results | |
| V.V. Konovalov, V. Ya. Senik, I.S. Yablonsky |
| Method of Testing Thin-Walled Pipes in Complex Stressed State | |
| V.A. Glouschenkov, S.G. Simagina |
| Methods of Forecasting Articles Destruction with Application of Acoustic Emission | |
| V.E. Wainberg, L.I. Dekhtyar, V.K. Andreychuk |
| Micromechanisms of Fracture in Precrackcd Welded Specimens | |
| K. Geric, S. Sedmak |
| Monitoring Fracture Toughness using Miniature Samples | |
| S.D. Norris, J.D. Parker |
| New Methods of Micro- and Macro-Crack Retardation | |
| K.G. Lagutin |
| Numerical and Experimental Studies of the Laws of Low-Cycle Fatigue Crack Propagation in Welded Joints | |
| V.V. Yakubovskii, V. V. Dolezhalov, A.V. Tovmachenko |
| On Sequence Effects in Random-Load Fatigue | |
| V.V. Yermolayeva, S.U. Petinov |
| On Statistical Distribution of Fatigue Crack Growth at Weld Toes | |
| L.J. Wang, Y.H. Zhang, J. D. Kang |
| On the Applicability of Damage Models for the Description of the Failure Behaviour of Ductile Steels | |
| K. Kussmaul, M. Seidenfuss, U. Eisele |
| Pipelines Resistance Estimation on Unstable Crack Propagation | |
| G.I. Makarnv |
| Plastic zone Evolution in Notched Bars: Implications in Environmentally- Assisted Fracture | |
| I. Taribio |
| Pneumotests of Vessels using Acoustic Emission Control | |
| J.P. Borodin. A.D. Domentiew, I.W. Gulewsky, S.N. Iwanow, W. W. Konowalow, W.P. Timochin |
| Practical Application of Fracture Mechanics Methods in CAD Systems | |
| I.I. Koksharov |
| Prediction of the Influence of Warm Prestressing Conditions on Pressure Vessel Resistance to Brittle Fracture | |
| V.T. Troshchenko, V.V. Pokrovsky, V. Yu. Podkolzin |
| Relations between Notch Stress and Crack Stress Intensity Applied to Welded Joints | |
| D. Radaj, S. Zhang |
| Residual Life Assessment of Pipeline Bend by a Metallographic Measurement of Cavitation Damage-Determination of the "A" Parameter | |
| D. Milanovic, V. Sijacki-Zeravcic, A. Markovic, M. Radovic |
| Statistical Analysis of the Surface Fatigue Crack Growth in Welded Joints | |
| Y.H. Zhang, L.J. Wang |
| Temperature Dependence of Fracture Resistance of Different Zones of High-Strength Aluminium Alloy Welded Joints | |
| T.M. Labur |
| The Crack Characteristics Related to Fracture of Chip in Machining | |
| Z.W. Chen, H Z. Wu, M.D. Tan, H.N. Fu |
| The Experimental Investigation on Deformation and Opening Displacement of Crack Tip | |
| X. Sun, W. Cao, X. Lu |
| The Influence of Low Temperatures and Stress Concentration on Mechanical Properties and Fatigue Strength of the HSLA Steels | |
| J. Fila |
| The Influence of Open Profiles Warpings upon Kinetics of Cracks Development in Them | |
| T.I. Rybak |
| The Relationship between Notch and Fracture Toughness in Steels and Weld metals | |
| K. Kalna, F. Vins |
| The Use of Fracture Mechanics for Assessing Reliability of Weld Repaired Steam Turbine Rotors | |
| A.A. Tipton |
| The Wave Method for Analysis of Structural Members Injury under Impact | |
| Yu. A. Rossikhin, M. V. Shitikova |
| Theoretical Study on Peculiarities of Small Ellipsoidal Defects Detecting and Evaluation in Layered Medias | |
| A. Orlowsky |
| To the Theory of Defects Detection in Plate during Its Electromagnetic Sounding | |
| Z. T. Nazarchuk, O.I. Ovsyannikov |
| Toughness Comparison between the Reheated Intercritical Zone of Two HSLA Steels | |
| C.L. Davis, J.E. King |