General Papers
| Analysis of acoustic emission: a view | |
| A. K Rao, C. R. L. Murthy |
| Analysis of defects and damage in composites | |
| G. C. Sih |
| Analysis of rolling contact fatigue and fracture | |
| G. T. Hahn, V. Bhargava, H. Yoshimura, C. Rubin |
| Corrosion fatigue | |
| M. O. Speidel |
| Crack growth in metals affected by hydrogen | |
| V. V. Panasyuk, A. Ye Andrejkiv, V. S. Kharin |
| Creep damage mechanics and micromechanisms | |
| M. F. Ashby, B. F. Dyson |
| Cyclic deformation and fatigue mechanisms | |
| C. Laird |
| Damage accumulation during ductile rupture and the development of fracture maps | |
| D. Teirlinck, M. F. Ashby, J. D. Embury |
| Effects of microstructure on the fracture toughness of metallic alloys | |
| J. F. Knott |
| Experimental methods for determining stress intensity factors | |
| P. S. Theocaris |
| Factors affecting the design of military aircraft structures in carbon fibre reinforced composites | |
| B. W. Anderson |
| Fatigue damage accumulation processes in engineering metals and plastics | |
| R. W. Hertzberg |
| Fatigue failure mechanisms in composite laminates | |
| H. T. Hahn, L. Lorenzo |
| Fatigue of composites under spectrum loading | |
| M. M. Ratwani |
| Fracture and toughness of polymer solids | |
| I. Narisawa, M. Ishikawa |
| Fracture control in welded steel structures | |
| A. A. Wells |
| Fracture mechanics for cracks in weldments | |
| J. Carlsson |
| Fracture of cement and concrete | |
| S. P. Shah |
| Fundamental problems in dynamic fracture | |
| W. G. Knauss |
| Improvements to PWR vessel fracture analysis methods | |
| A. P. Tanon |
| Mechanisms of fractures in fiber-reinforced laminates | |
| H. W. Bergmann |
| Micro-mechanics of fracture and failure of geo-materials in compression | |
| S. Nemat-Nasser, H. Horii |
| Multiaxial fatigue: a brief review | |
| K. J. Miller, M. W. Brown |
| On fatigue-creep-environment interaction and the feasibility of fatigue maps | |
| D. M. R. Taplin, N. Y. Tang, H. H. E. Leipholz |
| Probabilistic fatigue and fracture design | |
| A. O. Payne |
| Recent studies of energy integrals and their applications | |
| S. N. Atluri, T. Nishioka |
| Size and geometry effects | |
| S. Banerjee |
| Some aspects of sulfur-induced embrittlement of steels at elevated temperature | |
| C. J. McMahon Jr |
| Some notes to the high temperature crack growth rates and probabilistic fracture mechanics approach respectively | |
| T. Yokobori, A. T. Yokobori Jr. |
| Theoretical aspects of fatigue and creep crack growth | |
| K. Sadananda |
| Thermal crack tip blunting in high speed cracks | |
| J. G. Williams |
| Thresholds for fatigue crack propagation: questions and anomalies | |
| R. O. Ritchie |
| Tough heterogeneous polymers | |
| A. S. Argon, R. E. Cohen, O. S. Gebizlioglu, C. E. Schwier |
| Toughening of ceramics | |
| M. V. Swain, L. R. F. Rose |
| Two- and three-dimensional analysis of penetration and perforation | |
| T. Maini, M. L. Wilkins |
| Unified approach for modelling fatigue crack growth and some observations on behaviour under flight simulation loading | |
| K. N. Raju, R. Sunder |
| A dislocation model of the delaying effects of overload | |
| M. Delin |
| A dynamic program for two-dimensional fracture mechanics problems | |
| F. G. Benitez |
| A mechanics-metallurgy approach to cleavage behavior in mild steel | |
| M. Yao, Y. K. He, D. M. Li, C. Z. Zhou |
| A micromechanism based statistical model for brittle fracture | |
| K. Wallin, T. Saario, K. Torronen, J. Forsten |
| A new four parameter method for SIF determination | |
| A. F. Ahmed, K. Rajaiah, M.S.C. Bose |
| A simulation of ductile fracture in a three-point bend specimen using a softening material response | |
| G. C. Li, I. C. Howard |
| A theory for translational crack layer propagation | |
| Vittorio Di Cocco |
| An approach to a crack-inclusion interaction problem | |
| I. Kunin, B. Gommerstadt |
| An efficient finite- element-algorithm for three-dimensional fracture problems | |
| M. Kuna, V. Schmidt |
| An EPFM crack growth analysis of a 3PB specimen in 2D and 3D | |
| L. G. Lamain |
| An investigation of the effect of thermal gradients on fracture | |
| S. Maksimovic |
| Analytical and numerical solutions for configurations modeling finite cracked plates under harmonic loading | |
| V. Z. Parton, V. G. Boriskovsky |
| Analytical solution of plastic strain concentration (proof of Neuber's empirical equation) | |
| Y. Lin, E. Lin |
| Application of fracture concepts to steel 42 Cr Mo 4 in different heat treated conditions | |
| L. Issler, A. Kumar, H. Weiss |
| Application of fracture mechanics in the fracture analysis of wide plates | |
| H.-J. Rosezin, D. Dormagen, W. Hesse, W. Dahl |
| Application of line-spring model to a stiffened cylindrical shell containing an axial part-through crack | |
| O. S. Yahsi |
| Application of new methods to the boundary element method analysis of stress intensity factors | |
| H. Kisu, R. Yuuki, H. Kitagawa |
| Application of the eigenfunction expansion method to determine crack-tip stresses in thin plates subjected to bending | |
| N. Subramonlan, D. L. Jones |
| Application of the J concept to very small tension specimens of austenitic stainless steels | |
| J. P. Chavaillard, D. Miannay |
| Brittle fracture strength of notched round bar under axial load | |
| M. Aoki, A. Kiuehi |
| Characteristic crack tip field and the characterizing parameters for elastic-plastic fracture mechanics | |
| H. W. Liu, T. Zhuang |
| Construction of a fault tree using prolog | |
| S. Fukuda |
| Correlation between apparent toughness Ka and Charpy impact energy in high and low strength steels | |
| M. Habashi, D. Miannay, M. Tvrdy, J. Galland |
| Crack opening displacement and hydrostatic stress | |
| G. Matsoukas, B. Cotterell, Y.-W. Mai |
| Damaging effects of porosity on fracture of sintered nickel | |
| Ph. Bompard, D. Francois |
| Deformation of porous imperfections relevant to ductile fracture | |
| R. D. Thomson, J. W. Hancock |
| Delamination of hard drawn eutectoid steel wires | |
| A. Brownrigg, R. Boelen, M. Toyama |
| Determination of combined mode stress intensity factors using mixed elements | |
| D. P. Mazumdar, P. N. Murthy |
| Ductile fracture mechanisms in an austenitic stainless steel | |
| I. J. O'Donnell, B. L. Eyre, F. W. Noble |
| Effect of elastic anisotropy on the brittle fracture of a polycrystalline solid | |
| C. S. Pande, R. A. Masumura |
| Effect of purity and thermomechanical treatment on fracture behaviour of low-alloy martensitic steels | |
| J. Eiekemeyer, G. Zouhar |
| Effect of specimen thickness on crack front plasticity characteristics in three-dimensions | |
| E. Moyer Jr., H. Liebowitz |
| Elastic interaction of a crack with micro cracks | |
| A. Chudnovsky, A. Dolgopolsky, M. Kachanov |
| Elastic-plastic analysis of a finite internally cracked plate under various assumptions on cohesive force at crack tips | |
| Y. Z. Chen |
| Estimation of stress triaxiality ahead of a notch by means of void growth studies | |
| Y. W. Shi, J. T. Barnby, A. S. Nadkarni |
| Experimental investigation of notch sensitivity of thermomechanically treated aluminium alloy | |
| V. Sijacki-Zeravcic, A. Sedmak, S. Sedmak |
| Experimental validation of constitutive relations including ductile fracture damage | |
| G. Rousseller, J. C. De Vaux, G. Mottet |
| Finite element evaluation of fracture mechanics parameters using rapid mesh refinement | |
| A. Sedmak |
| Foundations of mechanics of brittle fracture of materials with initial stresses | |
| A. N. Guz |
| Fracture assessment in the presence of residual stresses | |
| R. H. Leggatt |
| Fracture morphology in compacted graphite cast iron | |
| A. Tiziani, E. Ramous, A. Molinari |
| Fracture profile analysis of heat treated 4340 steel | |
| K. Banerji, E. E. Underwood |
| Fracture toughness of cast iron | |
| J. Pirs |
| Governing parameters for sub-critical crack- growth analysis in areas of high nominal strain | |
| S. Bhandari, S. Charif d 'Ouazzanw, C. Faidy |
| Improving both KIc and CVN fracture energy of AISI 4340 steel through high temperature thermomechanical treatment | |
| M. G. Hebsur, J. J. Moore |
| Influence of age-treated fine-scale microstructure on the fracture behaviour of Inconel X-750 | |
| A. K. Sinha, M. G. Hebsur, J. J. Moore |
| Influence of cleanliness, annealing temperature and notch root radius on toughness properties of AISI 316 stainless steel | |
| M. G. Hebsur, J. J. Moore |
| Influence of couple stresses on stress intensity factors | |
| K. Sridharan |
| Influence of loading rates on the ductile crack growth of austenitic stainless steels | |
| C. Fenerol, P. Balladon, J. Heritier |
| Influence of notch root radius on the fracture behavior of AISI 4140 steel austenitized at low and high temperatures | |
| M. L. Graca, F. A. Darwish, L. C. Pereira |
| Influence of retained austenite on the fracture toughness of high strength steels | |
| V. T. T. Miihkinen, D. V. Edmonds |
| Interaction of a macrocrack with microdamages | |
| V. P. Tamuzs, N. B. Romalis |
| Interrelation among microstructure, crack-tip blunting, and ductile fracture toughness in mild steels | |
| D. Firrao, R. Roberti |
| Investigations on MAG weld metal for critical valuation of fracture mechanics properties | |
| T. Konkoly, H. Straube, T. Varga |
| Localized deformation and fracture due to low velocity particulate erosion of ductile metals by spherical particulates | |
| P. S. Follansbee, D. Banerjee, J. C. Williams |
| Microstructural effects on the cleavage fracture stress in fully pearlitic 1080 steel | |
| J. J. Lewandowski, A. W. Thompson |
| Modelling of fracture micromechanisms | |
| A. W. Thompson |
| Modelling surface defects as cracks: a new approach to the fatigue limit of steel wires | |
| I. Verpoest, E. Aernoudt, A. Deruyttere, M. Neirynek, U. D'Haene |
| Modelling the unlocking and slip of crack surfaces under mode II loading | |
| M. C. Smith, R. A. Smith |
| Near-tip analysis of plane-stress mode-I steady crack growth in linear hardening material with Bauschinger effect | |
| Z. Xiao-ti, Z. Run-fu, H. Keh- chih |
| Non-stationary problems of linear fracture mechanics by the boundary element method | |
| J. Balas, J. Sladek, V. Sladek |
| Numerical computation on a singularity in fracture | |
| B. Zhu, Y. Chen |
| Numerical simulation of static and dynamic shadow patterns using an atomistic description of crack initiation and propagation | |
| B. Moran, W. G. Hoover, D. M. Norris |
| On the blunting line and initiation to tearing for two steels | |
| Y. Wei, M. R. Etemad, C. E. Turner |
| On the influence of specimen orientation on the ductile fracture behaviour of the steel Fe E 350 | |
| O. Dormagen, W. Dahl |
| Path dependence of stable crack growth | |
| E. E. Gdoutos |
| Quantitive study on ductile-brittle transition temperature of ferritic stainless steel Cr24Al2Si | |
| J. Lee, Q. P. Zhong |
| Relating bend formability and fracture toughness | |
| E. Shapiro |
| Similitude relations for comparison study of thermomechanics stability of fracture | |
| P. Jouanna, V. F Poterasu, G. Berthomieu |
| Slow stable crack growth and instability in elastic-plastic weld metals and structural steel | |
| G. R. Wood, R. I. Stephens |
| Some crack problems on plates and shells | |
| L. Chuntu, L. Yingzhi |
| Some problems in the J-integral | |
| K. Zhen-bang |
| Some problems on meeting, deviation and branching of slip-lines | |
| G. P. Cherepanov, L. A. Kipnis |
| Stress intensity factor solutions for a cracked bolt | |
| G. G. Reibaldi |
| Stress intensity factors at the tips of cracks emanating from holes with misfit fasteners | |
| P. D. Mangalgiri, T. S. Ramamurthy, B. Dattaguru |
| Synergistic effects of dynamic strain-aging and neutron irradiation on strength and ductility of mild steel | |
| K. Linga Murty |
| Tearing instability and the development of voids in a low-alloy steel | |
| C. Q. Zheng, J. C. Radon |
| The ductile fracture toughness of an austenitic-ferritic stainless steel | |
| R. Roberti |
| The effects of hydrostatic tensile stress on fracture in some structural alloys | |
| M. Shimura, S. Saito |
| The influence of grain boundary carbide density on the brittle fracture of ferrite/pearlite steels | |
| B. Mintz |
| The in-situ SEM observation of tensile fracture processes in low carbon dual-phase steels | |
| H. P. Shen, T. C. Lei |
| The J-based fracture assessment method, EnJ, and application to two structural details | |
| C. E. Turner |
| The plane strain fracture strain of steels | |
| S. Slateher, J. F. Knott |
| The relationship between fracture toughness and microscopic cleavage fracture stress of steel 20 MnMoNi 5 5 | |
| D. Dormagen, H. DUnnewald, W. Dahl |
| The steady state propagation of a damaged zone of an elastic brittle solid | |
| H. D. Bui, A. Ehrlacher, C. Renard |
| The stress-strain fields at crack tip in cracked spherical shell | |
| L. Chun-tu, L. Ying-zhi |
| The unstable extension of inclined cracks under uniaxial tension and compression | |
| S. K. Maiti |
| Three dimensional aspects of sub- critical flaw growth | |
| C. W. Smith, G. Nicoletto |
| Three dimensional stress problem of a finite thick plate with a through-crack under tension | |
| M. N. Bapu Rao |
| Unilateral contact between the sides of an elastic crack | |
| M. Birades, Ph. Destuynder, P. Mialon, J. P. Lefebvre |
| Void nucleation and growth during tensile deformation in steel | |
| J. T. Barnby, C. J. Flavell, A. S. Nadkarni, Y. W. Shi |
| Volume effect on cleavage strength, microstructure and fracture micromechanism of welded 15MnVN steel | |
| H. Chun-xiao, C. Qi-gong, S. Yi, Z. Xiu-yuan |
| Width influence on R-curves obtained with thin sheet test-pieces bearing blunt central notches | |
| D. Firrao, R. Ferrario, F. Ricci, R. Roberti |
| A critical depth criterion for the evaluation of long-life fatigue strength under multiaxial loading and a stress gradient | |
| J. F. Flavenot, N. Skalli |
| A discussion of mechanisms of accelerated and retarded fatigue crack growth | |
| N. A. Fleck, R.A. Smith |
| A fracture mechanics approach to fatigue in flake graphite cast iron | |
| R. N. Castillo, T. J. Baker |
| A local approach to crack growth in creeping materials by a shear DCB model | |
| H. D. Bui, K. Dang Van, E. de Langre |
| A metallographic study of cavitation in Ti-6Al-4V alloy | |
| G. Gurewitz, A. K. Mukherjee |
| A weak beam transmission electron microscopy study of a fatigue crack tip in a 2024 aluminum alloy | |
| K. Rajan, R. L. Hewitt |
| A weak beam transmission electron microscopy study of a fatigue crack tip in a 2024 aluminum alloy | |
| Vittorio Di Cocco |
| An internal variable approach to creep, fatigue and their interaction at elevated temperatures | |
| M. Steen, W. Provost, A. Dhooge |
| Analysis of cyclic fracture toughness of structural materials under self-similar propagation of fatigue cracks | |
| S. A. Kunavin, V. F. Terentjev, A. G. Botchvar, R. Chakraborti |
| Applicability of energy rate line integral to creep crack growth | |
| V. M. Radhakrishnan |
| Biaxial fatigue design procedure applied to welded plate structures | |
| G. J. Moyar, V. K. Garg |
| Cavity growth during superplastic deformation in 7475 aluminum alloy | |
| M. K. Rao, B. P. Kashyap, A. K. Mukherjee |
| Closure effects in short and long fatigue cracks | |
| I. Le May, S. K. P. Cheung |
| Correlation of fatigue behavior with microstructure of 2xxx and 7xxx aluminum alloys | |
| G. V. Scarich, M. J. Gambone, G. R. Chanani, P. E. Bretz |
| Correlation of two constants in the Paris equation for fatigue crack propagation rate in region II | |
| J.B. Lee |
| Crack growth in the creep region criteria based on material forces | |
| R. L. Roche |
| Crack propagation studies in austenitic stainless steel in hot corrosive flue gases containing vanadium | |
| S. Ramakrishna Iyer, K. J. L. Iyer, V. M . adhakrishnan |
| Creep crack growth in 2219-T851 aluminum alloy: applicability of fracture mechanics concepts | |
| P. L. Bensussan, R. M. Pelloux |
| Creep crack growth in Nimonic 80A and in a l Cr 0.5Mo steel | |
| H. Riedel, W. Wagner |
| Creep damage and failure of several pm nickel base superalloys | |
| J. M. Escamez, J. L. Strudel |
| Creep-rupture and fractographic analysis of stirling engine superalloys tested in air and 15 MPa hydrogen | |
| S. Bhattacharyya, R. H. Titran |
| Cyclic growth and coalescence of multiple fatigue cracks | |
| A. F. Grandt Jr., R. Perez, D. E. Tritsch |
| Delayed-elastic model for initiation and accumulation of creep cavitation at high temperatures | |
| N. K. Sinha |
| Effect of tension-compressive cycling on fatigue crack growth | |
| C. Berger, W. Wiemann |
| Effect of variation of stress frequency on fatigue crack propagation in titanium | |
| S. Takezono, H. Sakamoto |
| Effects of porosity on fatigue crack propagation in sintered nickel | |
| Ph . Bompard, D. Francois |
| Elastic-plastic analyses for short fatigue crack at notch | |
| W. Tzu-Chiang |
| Elastic-plastic fatigue crack growth | |
| J. Polak, J. Nemec, M. Klesnil |
| Elevated temperature fatigue of 2.25 Cr 1 Mo steel | |
| K. D. Challenger |
| Experimental evidence of the influence of plasticity and surface-roughness on fatigue crack-closure phenomenon in vacuum | |
| M. C. Lafarie-Frenot, C. Gasc |
| Fatigue behavior of cold worked plain carbon steel | |
| G. Crespo, D. Pilo |
| Fatigue behaviour of advanced aluminum alloy lugs of 7475-T761 with and without initial cracks | |
| A. Buch, A. Berkovits |
| Fatigue crack growth and crack closure of structural materials under random loadings | |
| M. Jono, J. Song, M. Kikukawa |
| Fatigue crack growth in threaded 'tether' connections | |
| W. D. Dover, D. A. Topp |
| Fatigue crack path in medium-high carbon ferrite-pearlite structures | |
| J. M. Rodriguez Ibabe, J. Gil Sevillano |
| Fatigue crack propagation from an inclined crack under combined mode loading | |
| R. Chinadurai, R. K. Pandey, B. K. Joshi |
| Fatigue crack propagation in the weld bond region of a type 304 stainless steel weldment | |
| Y. Mutoh, I. Sakamoto |
| Fatigue crack propagation through residual stress fields | |
| B. L. Averbach |
| Fatigue crack propagation under various types of loading | |
| S. Machida, M. Toyosada, T. Okamoto |
| Fatigue failure criteria for materials under random triaxial state of stress | |
| E. Macha |
| Fatigue growth of part-through cracks: a new approach | |
| M. Prodan, T. H. Erismann |
| Fatigue of structural materials at high-frequency cyclic loading | |
| V. A. Kuzmenko |
| Fatigue propagation of short cracks | |
| A. Stromboni |
| Fatigue strength estimation incorporating residual stresses: comparison of different fatigue criteria | |
| N. Skalli, J. F. Flavenot |
| Fractographic study of fatigue crack kinetics in bodies and structures | |
| I. Nedbal, J. Siegl, J. Kunz |
| Fractography of fatigue crack growth in low-alloy steels | |
| J. Woodtli-Folprecht, M. Prodan, J. C. Radon |
| Fracture behaviour of titanium alloy diffusion welded joints subjected to cyclic loading | |
| E. S. Karakozov, S. V. Ivanov |
| Influence of crack closure on fatigue crack propagation | |
| A. Bignonnet, A. Dias, H. P. Lieurade |
| Influence of frequency on fatigue limit and fatigue crack growth behavior of polycrystalline Cu | |
| B. Weiss, H. Mullner, R. Stickler, P. Lukas, L. Kunz |
| Influence of multiple overloads on fatigue crack growth | |
| C. Robin, C. Chehimi, M. Louah, G. Pluvinage, M. L. Schneider, A. Bignonnet |
| Influence of superimposed fatigue loads on the effect of warm pre-stressing | |
| G. Hedner |
| Initiation of fatigue cracks at non-metallic inclusions in large forgings | |
| C. Berger, K. H. Mayer, W. Oberparleiter, R. B. Scarlin |
| Investigation of temperature fields of stainless steel during deformation | |
| Y. Huang, S. X. Li, C. H. Shih |
| Load frequency dependence in fatigue life of nitride steel evaluated by fatigue tests and internal friction measurements | |
| K. Ishizaki |
| Low cycle fatigue propagation of microcracks in two superalloys | |
| M. Reger, F. Rezai Aria, L. Remy |
| Micromechanism controlling the fatigue crack propagation in Al-Zn-Mg single crystals | |
| E. Affeldt, V. Gerold |
| Mixed-mode crack initiation studies of anisotropic aluminium alloys | |
| N. G. Ohlson |
| Mode II fatigue crack growth characteristics and mechanism in aluminum alloy 7N01-T4 weldments under mode II loading | |
| A. Otsuka, K. Tohgo, T. Kiba, S. Yamada |
| Multiaxial fatigue limit: a new approach | |
| K. Dang Van, A. Le Douaron, H. P. Lieurade |
| Near-threshold fatigue crack growth behaviors in air at room temperature for various stainless steels | |
| S. Matsuoka, S. Nishijima, C. Masuda, S. Ohtsubo |
| North sea oil platforms: failure under random loading | |
| R. Foroughi, J. C. Radon |
| On fatigue cracking in prestressing steel wires | |
| A. Valiente, V. Sinchez-Galvez, M. Elices |
| On the influence of the initial DK level on the post overload crack propagation behaviour | |
| N. Ranganathan, J. Petit, J. de Fouquet |
| On the significance of the threshold for fatigue crack growth | |
| A. J. McEvily, K. Minakawa |
| Prediction of fatigue crack- growth patterns and lives in three-dimensional cracked bodies | |
| J. C. Newman Jr., I. S. Raju |
| Role of oxidation in micro-fracture process of AISI 316 stainless steel in high temperature low cycle fatigue | |
| T. Kunio, M. Shimizu, K. Yamada, M. Fukumoto, M. Ito |
| Short crack behaviour in A533B and En8 steels | |
| M. N. James, G. C. Smith |
| Short crack development in mechanical structures | |
| J. Nemec, J. Drexler |
| Some problems of materials fatigue | |
| V. V. Panasyuk |
| Spectrum fatigue crack growth behavior of aluminum alloys | |
| G. R. Chanani, G. V. Scarich, P. E. Bretz, A. A. Sheinker |
| Statistical characteristics of low-cycle fatigue cracks propagation from stress concentration zones | |
| N. A. Mackhutov, V. V. Zatsarinny, V. A. Novikov |
| Strain and damage in concentration zones at low-cycle high-temperature loading | |
| N. A. Mackhutov, M. M. Gadenin, O. A. Levin, A. N. Romanov |
| Strain localization during low-cycle fatigue of iron and iron-silicon alloys single crystals | |
| V. Novak, B. Sestak, S. Kadeckova |
| Stress intensity factors for cracks emanating from notches, subjected to fatigue | |
| J. T. Barnby, A. S. Nadkarni, J. E. Zhou |
| Study of elastic fatigue crack growth in stage II using the similarity criterion of local fracture | |
| V. S. Ivanova |
| The crack layer approach to toughness characterization in steel | |
| M. Bessendorff, A. Chudnovsky |
| The defect size determining the fatigue limits of steels | |
| S. Nishijima, K. Tanaka, H. Sumiyoshi |
| The effect of contact stress intensity factor on fatigue crack propagation under variable amplitude loading | |
| Y. C. Lam, J. F. Williams |
| The effect of frequency on fatigue crack propagation rate | |
| D. Taylor, J. F. Knott |
| The effect of ion implantation on the fatigue fracture of structural steel | |
| A. V. Fyodorov, E. V. Vasilyeva |
| The effects of mechanical and environmental variables on fatigue crack propagation in butt-welded joints | |
| S. P. Moghadam, J. C. Radon |
| The effects of microstructure, temperature and R-ratio on fatigue crack propagation and threshold behaviour in two Ni - base alloys | |
| J. E. King, R. A. Venables, M. A. Hicks |
| The fatigue of an aluminium alloy produced by fretting on a shot peened surface | |
| G. Leadbeater, B. Noble, R. B. Waterhouse |
| The fracture mechanics of fatigue, a synthesis | |
| O. Helgeland |
| The influence of grain size on creep rupture properties of type 316 stainless steel | |
| S. L. Mannan, P. Rodriguez |
| The influence of microstructure on stage I fatigue crack growth in a 13pct chromium steel | |
| S. K. Bhambri, P. Rama Rao |
| Time and temperature-dependent processes affecting near threshold fatigue crack growth | |
| W. Gerberich, A. Wright, M. J. Lei |
| Twin boundary cavitation during high temperature creep of Inconel alloy X-750 | |
| M. C. Pandey, D. M. R. Taplin |
| Variation of effective stress range ratio under simple variable amplitude loading | |
| S. Chand, S. B. L. Garg |
| Waveform and frequency effects on the high temperature fatigue crack propagation rate of stainless steel | |
| A. Plumtree, S. Schafer |
| A method for determining crack velocity stress intensity curves for stress corrosion cracking of GRP | |
| F. R. Jones, J. W. Rock |
| A simple model for shear cracking and failure in composite masonry | |
| S. C. Anand, D. J. Stevens |
| Acoustic emission studies on environmental cracking in brasses | |
| U. K. Chatterjee, S. C. Sircar, G. S. Agrawal |
| An analysis of crack propagation behavior in stress corrosion cracking under repeating load by using an asymmetrical internal friction model | |
| K. Nakasa, H. Itoh, H. Take |
| An empirical approach to the evaluation of Gic in cemented carbides by means of Vickers indentations | |
| B. Luyckx |
| An examination of crack length estimation procedure for short fibre composites | |
| B. S. Patro, B. D. Agarwal, P. Kumar |
| An investigation on stress corrosion cracking (SCC) behaviour of Cr-Mo steels | |
| Vittorio Di Cocco |
| An investigation on stress corrosion cracking (SCC) behaviour of Cr-Mo steels | |
| Y. Youshi, y. Kiaming |
| Anisotropy of fracture toughness of piezoelectric ceramics | |
| G. G. Pisarenko |
| Change in fracture toughness in two phase ceramics by microcrack interaction | |
| S. B. Bhaduri |
| Characterization of failure behavior of advanced composites using off-axis flexural strength tests | |
| R. S. Raghava |
| Compressive fracture of glassy brittle materials | |
| B. L. Karihaloo |
| Compressive residual strength prediction in fiber-reinforced laminated composites subjected to impact loads | |
| V. Sarma Avva, H. L. Padmanabha |
| Continuous damage mechanics model of fracture in laminated composites | |
| M. P. Hnuk, R. D. Kriz |
| Corrosion fatigue of tubular welded joints | |
| W. D. Dover, T. J. Wilson |
| Corrosion-products induced wedge effect and fatigue crack growth of stainless steels | |
| K. Komai, S. Hurayama, H. Kanasaki |
| Crack propagation studies of a rubber-toughened epoxy resin in the scanning electron microscope | |
| S. Bandyopadhyay, V. M. Silva |
| Crack tip temperature fields in visco-plastic materials | |
| K. Hennig, B. Michel, P. Sommer |
| Creep behaviour of graphite-epoxy composites: temperature and moisture effects | |
| M. Marchetti, S. Tizzi, C. Tesei |
| Creep close to crack tip under stress corrosion | |
| S. E. Gurevich, L. D. Edidovich |
| Damage and fracture mechanics for concrete (a combined approach) | |
| D. Legendre, J. Mazars |
| Dependency of the initial stage of stress corrosion cracking behavior of austenitic stainless steel on the stress level | |
| T. Yagasaki, Y. Kimura, T. Kunio |
| Effect of beryllium trace addition on the dynamic SCC behavior of aged aluminium-5% zinc-4% magnesium alloy | |
| P. Gopalan, E. S. Dwarakadasa |
| Effect of environment on low- cycle fatigue behaviour of cast nickel-base superalloy IN738LC | |
| G. Jianting, D. Ranucci, E. Pieco |
| Effects of hydrogen and impurities on fracture behavior of a low strength Cr-Mo steel | |
| J. K. Chakravartty, T. K. Sinha, M. K. Asundi |
| Effects of micromechanical modelling on the fracture analysis of thermally loaded fiber reinforced composites | |
| F.-G. Buchholz, K. P. Herrmann |
| Effects of phosphorus and molybdenum on the caustic stress corrosion cracking of NiCrMoV steels | |
| N. Bandyopadhyay, C. L. Briant |
| Enhanced stress corrosion resistance from steels having a dual-phase austenite-martensite microstructure | |
| T. V. Venkatasubramanian, T. J. Baker |
| Environment assisted fracture of metallic glasses | |
| T. K. G. Namboodhiri |
| Evaluation of ceramic fracture caused by thermal shock | |
| G. A. Gogotsi, A. N. Negovski |
| Evaluation of hydrogen embrittlement with fracture mechanics tests | |
| H. Stumpp, M. Junker, M. Zollinger |
| Evaluation of residual strength of conposite laminates damaged by low velocity impacts | |
| K. N. Lal |
| Factors contributing to R-curve behaviour in zirconia ceramics | |
| M. V. Swain, R. H. J. Hannink |
| Failure mechanisms of composite materials | |
| J. V. Suvorova |
| Fatigue crack growth in a glass fibre reinforced plastic | |
| C. R. Wachnicki, J. C. Radon |
| Fatigue damage evaluation in multifastened CFRP joints | |
| A. De Iorio, L. Lecce, S. Mignosi |
| Fatigue of notched (0, + 45, -45) CFRP with woven and non-woven +45° -45° layers | |
| S. M. Bishop, J. Morton |
| Fatigue properties of COMACO composites | |
| M. R. Piggott, W. K. Lam |
| Fractography and mechanism of hydrogen cracking – the fisheye concept | |
| M. Maser, V. Schmidt |
| Fracture behavior of Al 1100/ Al 2024 laminate composites | |
| K. K. Chawla, L. B. Godefroid |
| Fracture in viscoelastic solids | |
| L. V. Nikitin, A. Yu Kraynov |
| Fracture mechanics of axial-symmetrical bimetals | |
| N. A. Mackhutov, A. I. Tananov, N. N. Avtonomov, G. A. Slavkin |
| Fracture mechanism of concrete under cyclic loads and test method of failure processes | |
| L. Beres |
| Fracture of concrete under biaxial high temperature tests | |
| C. Ehm, U. Schneider, K. Kordina |
| Fracture statistics of glass cylinders broken by compression | |
| P. Kittl, M. Lean, G. M. Camilo |
| Fracture studies of coconut tree based fibres | |
| K. Sukumaran, S. G. K. Pillai, K. K. Ravikumar, K. G. Satyanarayana |
| Fracture toughness tests on plasma-sprayed coatings | |
| C. C. Berndt |
| Influence of corrosive environment on fatigue crack initiation in alloys for steam turbine blades | |
| B. Knosp, H. Saysse, A. Coulon |
| Influence of environment on the crack path in a superalloy at low fatigue crack growth rates | |
| J. N. Vincent, L. Remy |
| Interaction of non- coplanar cracks application to rock fracture | |
| H. P. Rossmanith, R. J. Beer, H. N. Linsbauer |
| Interactions between fatigue crack growth rate and kinetics of magnesium calcium deposits formation at crack tip of mild steel cathodically polarized in sea water | |
| M. Habashi, G. Philipponneau, S. Widawski, J. Galland |
| Measurements of COD and shape of micro crack region near crack tip in concrete | |
| Y. Yaozhong, J. Xiang, C. Jianguo, G. A. Guilan |
| Measurements of the fracture toughness KIc of concrete | |
| P. Rossi, P. Acker, D. Francois |
| Micromechanisms and macro- fracture parameters of LiF bicrystals | |
| B. I. Smirnov, T. N. Snezhkova, O. L. Volkova |
| Microstructure evolution of concrete under low- frequency cyclic loading: determination of the porosity variations | |
| G. Pons, J. C. Maso |
| New approach to the fracture toughness of concrete - probabilistic model | |
| P. C Perdikaris, A. Chudnovsky |
| New criteria for onset and subsequent viscoelastic strip | |
| A. Misawa, M. Takashi, T. Kunio |
| Numerical modelling of damage and fracture in concrete | |
| A. Carpinteri |
| Observations of crack nucleation and growth in polymers using the SEM | |
| V. R. Regel, A. H. Leksovskii |
| On modelling of delamination in laminated plates (an alternative to fracture mechanics approach) | |
| J. N. Reddy, A. Grimaldi, D. Frederick |
| On rock destruction round deep underground workings and its influence on the rock pressure value | |
| M. T. Alimzhanov |
| Oxide induced fatigue crack closure and near- threshold characteristics in A508-3 steel | |
| H. Kobayashi, T. Ogawa, H. Nakamura, H. Nakazawa |
| Recent results in dynamic photoelasticity as applied to rock fracture mechanics | |
| H. P. Rossmanith |
| Residual stiffness properties of cracked composite laminates | |
| R. Talreja |
| Size dependent effects on fracture toughness of concrete | |
| P. Nallathambi, B. L. Karihaloo |
| Some geophysical problems of fracture | |
| G. P. Cherepanov, A. S. Bykovtsev |
| Strength characterization and nature of crack propagation in sintered alpha silicon carbide | |
| R. K. Govila |
| Strength of adhesive bonded joints | |
| A. Kapoor, R. Prakash |
| Strength, fracture and deformation behaviour of Portland cement paste | |
| V. Sagar Dwivedi, P. L. Pratt |
| Stress corrosion failure of 304 type stainless steel pipe in seawater environment | |
| N. C. Kothari |
| Studies on fracture and strength behaviour of Al-glass and Al-flyash particulate composites | |
| B. N. Keshavaram, K. G. Satyanarayana, B. Majumdar, P. K. Rohatgi, B. Dattaguru |
| Sub critical growth of cracks with non- small plastic zones in viscoelastic bodies | |
| A. A. Kaminsky |
| Subcritical cracking behaviour under environments in a low strength-high toughness steel | |
| A. N. Kumar, R. K. Pandey |
| Tensile adhesion test measurements on plasma- sprayed coatings | |
| C. C. Berndt |
| The DKth behaviour of three stainless steels in different environments | |
| M. Ait Bassidi, J. I. Dickson, J. P. Bailon, J. Masounave |
| The effect of damage dissemination on fracture propagation | |
| J. Botsis, A. Chudnovsky, A. Moet |
| The effect of the test temperature and the strain rate on the fracture toughness of sintered carbides | |
| N. V. Novikov, A. L. Majstrenko |
| The effects of hydrogen on the mechanical properties of a 2.25 Cr /Mo alloy steel | |
| J. Bowker, M. R. Piggott, G. C. Weather1y |
| The fracture toughness of wood under impact loading | |
| S. Mall |
| The influence of electrothermal treatment on hydrogen embrittlement of AISI 4340 steel | |
| V. L. A. Silveira, G. F. W. Soares, J. L. B. Ribeiro, W.A. Mannheimer |
| The influence of microstructure and stress ratio on fatigue crack growth in WC-Co hardmetals | |
| N. Knee, W. J. Plumbridge |
| The strength and fracture of composite diamond-bearing tool materials | |
| A. L. Majstrenko |
| Time dependent quasi fracture in polymers | |
| S. S. Chern, C. C. Hsiao |
| A stress intensity factor tracer and its application to time dependent fracture testing | |
| Y. Suk Kim |
| A three dimensional wax analogue for the calibration of the electrical potential technique of crack growth monitoring | |
| R. A. Smith, A. D. Cameron |
| Adiabatic shearing and associated cracks in ballistic steel targets | |
| Y. Tirupataiah, V. M. Radhakrishnan, K. R. Raju |
| An analysis of some upsetting tests for assessing the cold forge ability of steels | |
| R. Sowerby, N. Chandrasekaran, N. L. Dung, O. Mahrenholtz |
| Analysis of quench cracking in steel by X-ray diffraction | |
| Y. Mitani, A. Salas-Tellez, J. G. Cabanas-Moreno |
| Application of local fracture criteria to dynamic fracture toughness | |
| G. Pluvinage, B. Marandet |
| Application of probabilistic fracture mechanics to optimize inspection frequency of power plant components | |
| B. B. Seth, S. C. Chay, D. H. Shaffer |
| Application of the white light speckle method to fracture studies | |
| A. Asundi |
| Assessment of dynamic fracture propagation resistance at instrumented high velocity gasgun impact tests on SENB-specimens | |
| H. C. van Elst |
| Automated batch processing of fatigue crack propagation tests | |
| R. Sunder |
| Bonded repairs to surface flaws | |
| R. Jones, R. J. Callinan |
| Breaking strength at low temperatures and methods of its evaluation | |
| Y. Solntsev, A. Vikulin, V. Veselov |
| Crack arrest behaviour and toughness in ductile materials | |
| N. J. I. Adams |
| Criteria for dynamic crack curving and branching | |
| M. Ramulu, A. S. Kobayashi |
| Defect assessment based on gross section yielding in wide plate tests | |
| R. M. Denys |
| Development of fatigue CTOD test for investigation of brittle regions in welded joints | |
| T. Ishikawa, K. Tanaka |
| Durability and damage-tolerance design and analysis of titanium airframe structures | |
| J. B. Chang |
| Dynamic crack tip stress fields in fracture test specimens | |
| A. Shukla, R. Chona |
| Dynamic growth of curvilinear ruptures at variable speed | |
| A. S. Bykovtsev, G. P. Cherepanov |
| Evaluation of dynamic fracture toughness in a Cr-Mo-V cast steel weld joint | |
| K. Rajanna, S. K. Bhambri, D. R. G. Achar |
| Experimental study of the J-integral in the plastic zone around a crack tip, using the Moire method | |
| M. Gueury, D. Francois |
| Experimental study on separation fracture with a high compliance testing machine for grade 50 kg-class high strength steel | |
| K. Mogami, K. Ando, N. Ogura, Y. Sakai |
| Facture toughness evaluation of pressure vessel steel by small three-point-bend specimens | |
| S. Chatterjee, C. P. Debel |
| Failure analysis of structures by continuum damage mechanics | |
| A. Benallal, R. Billardon, J. Lemaitre |
| Fatigue and fracture under variable-amplitude loading at ultrasonic frequency | |
| S. E. Stanzl, W. Hollanek, E. K. Tschegg |
| Fatigue crack growth in patched plates under constant amplitude and flight simulation loadings | |
| R. Chandra, R. Sunder |
| Finite element determination of tearing modulus for application to industrial cases | |
| T. Charras, A. Combescure |
| Fracture and cracks in metal cutting | |
| V. C. Venkatesh |
| Fracture mechanics based design of tubular joints for offshore structures | |
| S. Dharmavasan, W. D. Dover |
| Improved method for the photoelastic determination of mixed mode stress intensity factors | |
| M. M. Prabhu, P. B. Godbole, S. K. Bhave, L. S. Srinath |
| Influence of grain size and strain rate on acoustic emission during deformation and fracture of a type 316 stainless steel - preliminary results | |
| B. Raj, T. Jayakumar, D. K. Bhattacharya, P. Rodriguez |
| Influence of stress relieving and straightening on the fatigue and toughness behaviour of rails | |
| H. P. Lieurade, C. Maillard-Salin, D. Kaplan, R. Y. Deroche |
| Integrity evaluation of power plant components by fracture mechanics | |
| B. Mukherjee, M. L. Vanderglas |
| Interaction of an explosively driven crack with a large flaw | |
| A. Shukla |
| Investigation of an aircraft accident by fractographic analysis | |
| R. V. Krishnan, S. Radhakrishnan, A. C. Raghuram, V. Ramachandran |
| Investigation of creep behavior of Ti-alloy by impression test | |
| H. Y. Yu, M. A. Imam, B. B. Rath |
| Life assessment and damage tolerance of wind turbines | |
| R. J. H. Wanhill |
| Life prediction for random load fatigue based on the growth behavior of microcracks | |
| H. H. Heitmann, H. Vehoff, P. Neumann |
| Magnetic technique for evaluating the fatigue strength of ferromagnetic steels | |
| P. Ruuskanen, P. Kettunen |
| Measurement of DKth values of cracks nucleating in smooth surfaces, using an ACPD method | |
| T. Jutla, C. E. Nicholson, G. Jolley |
| Method for specimen life prediction under program loading taking into account the scatter in materials properties | |
| V. T. Troshchenko, E. I. Mitchenko |
| Mode-III SIFs in stationary and dynamic cracks traversing orthotropic and isotropic plates evaluated by caustics | |
| P. S. Theocaris, H. G. Georgiadis |
| Morphology of static orthotropic isochromatic crack-tip fringe patterns | |
| H. P. Rossmanith, H. N. Linsbauer |
| New approach to measurement of impact characteristics of brittle materials | |
| R. Eisenstadt, C. R. McCullough |
| Numerical applications of path independent integrals in the case of thermal strains, creep analysis and mixed mode situations | |
| J. L. Cheissoux |
| Observations on R-curve determination | |
| R. L. Jones, P. J. Barnes, T. V. Duggan |
| On the life assessment of a through-cracked welded tubular T-node | |
| D. K. Brown |
| On the risk of failure of nuclear pressure vessels | |
| G. Ostberg |
| Practical methods for assessing defects in components | |
| C. H. A. Townley |
| Prediction of critical size of defects in turbine shafts with or without a central bore | |
| P. Aubry, J. C. Bray, A. Chaudouet |
| Probabilistic fatigue safety evaluation of railroad freight car components | |
| J. Mohammadi, V. K. Garg, N. Subei |
| Quality control for nuclear grade austenitic stainless steels using Charpy impact testing | |
| S. K. Ray, P. R. Sreenivasan, K. G. Samuel, P. Rodriguez |
| Reappraisal of fracture toughness testing and assessment procedures | |
| A. H. Priest |
| Relationship between stretch zone and dynamic fracture toughness | |
| H. Blumenauer, I. Wagner |
| Relationships between fatigue crack growth and acoustic emission in C Mn structural steel | |
| C. Thaulow, M. Hval |
| Scattered-light photoelasticity in the study of internal cracks in three-dimensional bodies | |
| L. S. Srinath, K. S. S. Aradhya, K. Chandru |
| Shear bands and dynamic fracture | |
| G. Sundararajan |
| Short crack problems in gas turbine disks | |
| J. Drexler |
| Simple formulas for dynamic fracture mechanics parameters of elastic and viscoelastic three-point bend specimens based on Timoshenko's beam theory | |
| K. Kishimoto, M. Kuroda, S. Aoki, M. Sakata |
| Some theoretical and experimental aspects of mixed mode fractures | |
| H. A. Richard |
| Statistical theory of size effect on material strength – a review | |
| K. P. George |
| Structure-metallurgical approach to design of steels with high crack propagation resistance | |
| O. N. Romaniv, A. N. Tkach, V. N. Siminkovich |
| Study of cladding toughness in a pressure vessel steel water reactor | |
| P. Soulat, M. Al Mundheri |
| Surface damage measurement techniques for the determination of fatigue crack initiation | |
| B. C. Gowda, H. R. Jhansale |
| Test facilities for fatigue and crack growth tests under light water reactor conditions | |
| E. Klausnitzer |
| The application of fracture mechanics methodology to the damage tolerance analysis of the Boeing 757 airplane | |
| S. Rao Varanasi |
| The application of the double torsion testing technique to electroslag remelted high strength steels | |
| J. T. Berry, R. Ganatra, A. A. Anctilo |
| The effects of oil on acoustic emission testing of a 7010 aluminum alloy during fatigue cracking | |
| G. C. Weatherly, J. M. Titchmarsh, C. B. Scruby |
| The evaluation of pipe-line carrying capacity using fracture mechanics criteria | |
| V. P. Larionov, A. V. Lyglayev |
| The fatigue design of gas storage systems using fracture mechanics | |
| P. Hopkins, D. G. Jones |
| The prediction of failure of complex loaded components in the elastic-plastic regime | |
| R. Jordan, R. Helms, J. Ziebs, D. Aurich |
| The use of Chevron V-notched specimens in fracture toughness determination | |
| M. O. Lai |
| Three dimensional dynamic stress analysis around a moving crack and simulation of AE | |
| K. Katsuyama, Y. Sato |
| Weld cracking in feedwater containers of inkoo power plant | |
| J. Autio, T. Lepisto, P. Kettunen |