General Papers
| An assessment of the fracture toughness associated with flat and slant crack growth in A533B steel | |
| I. S. Abou-Sayed, C. W. Marshall, M.F. Kanninen |
| Analytic asymptotic solution of the kinked crack problem | |
| M. Amestoy, H. D. Bui, K. DangVan |
| Experimental determination on high loading rate effects on fracture toughness of aluminium alloys | |
| A. Andrzejewski, J. Klepaczko, G. Pluvinage |
| Hygrothermal aging effects on the micromechanisms of crack extension in glass fibre and carbon fibre composites | |
| P. D. Anstice, P. W. R. Beumont |
| The route of fatigue cracks as deduced from dislocation patterns | |
| J. Awatani, K. Katagiri, K. Koyanagi |
| Application of the equivalent initial damage method to fretting fatigue | |
| J. A. Alic, R. A. Shaffer |
| Deriving a design fatigue resistance curve for analyzing crack initiation | |
| C. Amzallag, J. L. Bernard, P. Rabbe, A. Pellissier Tanon |
| Fracture and fatigue crack propagation in bearing steels | |
| B. L. Averbach |
| The influence of prior austenite grain size and stress ratio on near threshold fatigue crack growth behavior in high strength steel | |
| R. Murakami, K. Akizono |
| The influence of specimen geometry on fracture of unwelded and welded steel specimens Comparison of experimental results with FEM calculation | |
| H. Krafka, K. Wobst, J. Ziebs, D. Aurich |
| Fracture analyses of angle - PLY laminates | |
| T. Nishioka, S. N. Atluri |
| Fracture mechanisms in the peeling failure of adhesive joints | |
| A. Crocombe, R. Adams |
| A criterion for hydrogen-induced fracture | |
| K. Akhurst |
| A metallographic study of torsional superplastic fracture in Zn-22% Al eutectoid alloy | |
| A. Arieli, R. W. Logan, A. K. Mukherjee |
| Cathodic hydrogenation of austenitic alloys in molten salts bath, at 200 or 300 degrees C: Study of hydrogen induced embrittlement | |
| R. Andriamiharisoa, M. Habashi, J. Galland, P. Azou |
| Crack detection by ultrasonic methods: Theory and experiment | |
| J. D. Achenbach, L. Adler |
| Effects of microstructural degradation on creep life prediction of Cr - Mo steel | |
| A. M. Abdel-Latif, J. M Corbett, D. Sidey, D. M. R. Taplin |
| Experimental study of fatigue crack growth under biaxial loading | |
| M. Truchon, M. Amestoy, K. Dang-Van |
| On the conditions of fatigue crack propagation under programmed loading | |
| V. Safta, T. Schulz, I. Arghiriade |
| On the relation between the creep mechanism and creep fracture | |
| A. Arieli, A. K. Mukherjee |
| Plane stress fracture under biaxial loading | |
| I. S. Abou-Sayed, D. Broek, T. P. Forte, R. B. Stonesifer |
| The analysis of stable crack growth in type 304 stainless steel | |
| S. G. Sampath, l. S. Abou-Sayed, D. Broek, C. Marschall, A. Zahoor, M. F. Kanninen |
| The mechanism and mechanics of subcritical crack propagation in hot-pressed SiC above 1000 degree C | |
| J. L. Henshall, S. N. Atluri |
| A study on unstable ductile fracture | |
| S. Aihara, S. Machida, T. Knazawa |
| A vibration technique for the determination of stress intensity factors | |
| C. J. I'ye, R. D. Adams |
| Brittle fracture initiation characteristics under bi-axial tensile load with large scale and general yielding | |
| Y. Ueda, K. Ikeda, T. Yao, M. Aoki, S. Shibasaki, T. Shirakura |
| Crack-tip plasticity for rapid crack propagation | |
| J. D. Achenbach, V. Dunayevsky |
| Dynamic elastic-plastic characterization of nuclear pressure vessel material | |
| G. Angelino, C. Fossati |
| Dynamic fracture analysis: A translating - singularity finite element procedure | |
| S. N. Atluri, T. Nishioka |
| Fatigue behaviour of welded joints between dissimilar metals (austenitic stainless steels and low alloy steels) | |
| C. Amzallag, J. L. Bernard, P. Rabbe, G. Slama |